Merge pull request adafruit#9641 from RetiredWizard/espsdioio2

esp32s3: Implement sdioio

locale/circuitpython.pot

@@ -661,12 +661,12 @@ msgid "Buffer length %d too big. It must be less than %d"
 msgstr ""
 
 #: ports/atmel-samd/common-hal/sdioio/SDCard.c
-#: ports/cxd56/common-hal/sdioio/SDCard.c shared-module/sdcardio/SDCard.c
-msgid "Buffer length must be a multiple of 512"
-msgstr ""
-
+#: ports/cxd56/common-hal/sdioio/SDCard.c
+#: ports/espressif/common-hal/sdioio/SDCard.c
 #: ports/stm/common-hal/sdioio/SDCard.c shared-bindings/floppyio/__init__.c
-msgid "Buffer must be a multiple of 512 bytes"
+#: shared-module/sdcardio/SDCard.c
+#, c-format
+msgid "Buffer must be a multiple of %d bytes"
 msgstr ""
 
 #: shared-bindings/_bleio/PacketBuffer.c
@@ -1183,11 +1183,13 @@ msgstr ""
 msgid "Interrupted by output function"
 msgstr ""
 
+#: ports/espressif/common-hal/_bleio/Service.c
 #: ports/espressif/common-hal/espulp/ULP.c
 #: ports/espressif/common-hal/microcontroller/Processor.c
 #: ports/mimxrt10xx/common-hal/audiobusio/__init__.c
 #: ports/mimxrt10xx/common-hal/pwmio/PWMOut.c
 #: ports/raspberrypi/bindings/picodvi/Framebuffer.c
+#: ports/raspberrypi/bindings/rp2pio/StateMachine.c
 #: ports/raspberrypi/common-hal/picodvi/Framebuffer_RP2040.c py/argcheck.c
 #: shared-bindings/digitalio/DigitalInOut.c
 #: shared-bindings/epaperdisplay/EPaperDisplay.c shared-bindings/pwmio/PWMOut.c
@@ -1307,6 +1309,7 @@ msgid "MAC address was invalid"
 msgstr ""
 
 #: ports/espressif/common-hal/_bleio/Characteristic.c
+#: ports/espressif/common-hal/_bleio/Descriptor.c
 msgid "MITM security not supported"
 msgstr ""
 
@@ -1539,8 +1542,9 @@ msgid "Not supported JPEG standard"
 msgstr ""
 
 #: ports/espressif/common-hal/paralleldisplaybus/ParallelBus.c
+#: ports/espressif/common-hal/sdioio/SDCard.c
 #, c-format
-msgid "Number of data_pins must be 8 or 16, not %d"
+msgid "Number of data_pins must be %d or %d, not %d"
 msgstr ""
 
 #: shared-bindings/util.c
@@ -1864,9 +1868,10 @@ msgstr ""
 msgid "SDIO GetCardInfo Error %d"
 msgstr ""
 
+#: ports/espressif/common-hal/sdioio/SDCard.c
 #: ports/stm/common-hal/sdioio/SDCard.c
 #, c-format
-msgid "SDIO Init Error %d"
+msgid "SDIO Init Error %x"
 msgstr ""
 
 #: ports/espressif/common-hal/busio/SPI.c
@@ -2242,14 +2247,12 @@ msgid "Update failed"
 msgstr ""
 
 #: ports/espressif/common-hal/_bleio/Characteristic.c
-#: ports/espressif/common-hal/_bleio/Descriptor.c
 #: ports/nordic/common-hal/_bleio/Characteristic.c
 #: ports/nordic/common-hal/_bleio/Descriptor.c
 msgid "Value length != required fixed length"
 msgstr ""
 
 #: ports/espressif/common-hal/_bleio/Characteristic.c
-#: ports/espressif/common-hal/_bleio/Descriptor.c
 #: ports/nordic/common-hal/_bleio/Characteristic.c
 #: ports/nordic/common-hal/_bleio/Descriptor.c
 msgid "Value length > max_length"
@@ -3098,7 +3101,8 @@ msgstr ""
 msgid "function missing required positional argument #%d"
 msgstr ""
 
-#: py/argcheck.c py/bc.c py/objnamedtuple.c shared-bindings/time/__init__.c
+#: py/argcheck.c py/bc.c py/objnamedtuple.c shared-bindings/_eve/__init__.c
+#: shared-bindings/time/__init__.c
 #, c-format
 msgid "function takes %d positional arguments but %d were given"
 msgstr ""
@@ -3250,7 +3254,7 @@ msgstr ""
 msgid "input must be a dense ndarray"
 msgstr ""
 
-#: extmod/ulab/code/user/user.c
+#: extmod/ulab/code/user/user.c shared-bindings/_eve/__init__.c
 msgid "input must be an ndarray"
 msgstr ""
 

ports/atmel-samd/common-hal/sdioio/SDCard.c

@@ -153,7 +153,7 @@ static void check_for_deinit(sdioio_sdcard_obj_t *self) {
 
 static void check_whole_block(mp_buffer_info_t *bufinfo) {
     if (bufinfo->len % 512) {
-        mp_raise_ValueError(MP_ERROR_TEXT("Buffer length must be a multiple of 512"));
+        mp_raise_ValueError_varg(MP_ERROR_TEXT("Buffer must be a multiple of %d bytes"), 512);
     }
 }
 

ports/cxd56/common-hal/sdioio/SDCard.c

@@ -91,7 +91,7 @@ uint32_t common_hal_sdioio_sdcard_get_count(sdioio_sdcard_obj_t *self) {
 
 static void check_whole_block(mp_buffer_info_t *bufinfo) {
     if (bufinfo->len % 512) {
-        mp_raise_ValueError(MP_ERROR_TEXT("Buffer length must be a multiple of 512"));
+        mp_raise_ValueError_varg(MP_ERROR_TEXT("Buffer must be a multiple of %d bytes"), 512);
     }
 }
 

ports/espressif/CMakeLists.txt

@@ -5,7 +5,7 @@ cmake_minimum_required(VERSION 3.16)
 set(ENV{IDF_PATH} ${CMAKE_SOURCE_DIR}/esp-idf)
 
 # The component list here determines what options we get in menuconfig and what the ninja file can build.
-set(COMPONENTS bt driver esp_driver_dac esp_driver_gpio esp_driver_gptimer esp_driver_i2s esp_driver_ledc esp_driver_pcnt esp_driver_rmt esp_driver_spi esp_driver_tsens esp_driver_uart esp-tls esp_adc_cal esp_event esp_netif esp_psram esp_wifi esptool_py freertos log lwip main mbedtls mdns soc ulp usb wpa_supplicant esp-camera esp_lcd vfs esp_vfs_console)
+set(COMPONENTS bt driver esp_driver_dac esp_driver_gpio esp_driver_gptimer esp_driver_i2s esp_driver_ledc esp_driver_pcnt esp_driver_rmt esp_driver_spi esp_driver_tsens esp_driver_uart esp-tls esp_adc_cal esp_event esp_netif esp_psram esp_wifi esptool_py freertos log lwip main mbedtls mdns soc ulp usb wpa_supplicant esp-camera esp_lcd vfs esp_vfs_console sdmmc)
 set(EXTRA_COMPONENT_DIRS "esp-protocols/components/mdns" "esp-camera")
 
 include($ENV{IDF_PATH}/tools/cmake/project.cmake)

ports/espressif/Makefile

@@ -87,6 +87,8 @@ INC += \
 	-isystem esp-idf/components/esp_driver_ledc/include \
 	-isystem esp-idf/components/esp_driver_pcnt/include \
 	-isystem esp-idf/components/esp_driver_rmt/include \
+	-isystem esp-idf/components/esp_driver_sdio/include \
+	-isystem esp-idf/components/esp_driver_sdmmc/include \
 	-isystem esp-idf/components/esp_driver_spi/include \
 	-isystem esp-idf/components/esp_driver_tsens/include \
 	-isystem esp-idf/components/esp_driver_uart/include \
@@ -128,6 +130,8 @@ INC += \
 	-isystem esp-idf/components/mbedtls/port/include \
 	-isystem esp-idf/components/newlib/platform_include \
 	-isystem esp-idf/components/nvs_flash/include \
+	-isystem esp-idf/components/sdio/include \
+	-isystem esp-idf/components/sdmmc/include \
 	-isystem esp-idf/components/soc/include \
 	-isystem esp-idf/components/soc/$(IDF_TARGET)/include \
 	-isystem esp-idf/components/spi_flash/include \
@@ -660,6 +664,9 @@ endif
 ifneq ($(CIRCUITPY_USB_DEVICE),0)
 	ESP_IDF_COMPONENTS_LINK += usb
 endif
+ifneq ($(CIRCUITPY_SDIOIO),0)
+	ESP_IDF_COMPONENTS_LINK += sdmmc esp_driver_sdmmc
+endif
 
 ESP_IDF_COMPONENTS_EXPANDED = $(foreach component, $(ESP_IDF_COMPONENTS_LINK), $(BUILD)/esp-idf/esp-idf/$(component)/lib$(component).a)
 

ports/espressif/boards/makerfabs_tft7/pins.c

@@ -121,10 +121,9 @@ static const mp_rom_map_elem_t board_module_globals_table[] = {
 
     // IO10 <> SD_CS is cut at factory (non-placed resistor position R34) and pulled up.
     // Permanent SDIO 1-bit mode?
-    // Until SDIO 1-bit mode is support on Espressif ports these pins aren't useful
-    // { MP_ROM_QSTR(MP_QSTR_SDIO_CMD), MP_ROM_PTR(&pin_GPIO11) },
-    // { MP_ROM_QSTR(MP_QSTR_SDIO_D0), MP_ROM_PTR(&pin_GPIO13) },
-    // { MP_ROM_QSTR(MP_QSTR_SDIO_CLK), MP_ROM_PTR(&pin_GPIO12) },
+    { MP_ROM_QSTR(MP_QSTR_SDIO_CLK), MP_ROM_PTR(&pin_GPIO12) },
+    { MP_ROM_QSTR(MP_QSTR_SDIO_CMD), MP_ROM_PTR(&pin_GPIO11) },
+    { MP_ROM_QSTR(MP_QSTR_SDIO_D0), MP_ROM_PTR(&pin_GPIO13) },
 
     { MP_ROM_QSTR(MP_QSTR_DISPLAY), MP_ROM_PTR(&displays[0].display) },
 

ports/espressif/common-hal/paralleldisplaybus/ParallelBus.c

@@ -36,7 +36,7 @@ void common_hal_paralleldisplaybus_parallelbus_construct_nonsequential(paralleld
     const mcu_pin_obj_t *write, const mcu_pin_obj_t *read, const mcu_pin_obj_t *reset, uint32_t frequency) {
 
     if (n_pins != 8 && n_pins != 16) {
-        mp_raise_ValueError_varg(MP_ERROR_TEXT("Number of data_pins must be 8 or 16, not %d"), n_pins);
+        mp_raise_ValueError_varg(MP_ERROR_TEXT("Number of data_pins must be %d or %d, not %d"), 8, 16, n_pins);
     }
 
     for (uint8_t i = 0; i < n_pins; i++) {