Fix loop_no_b_mass SM processes (COND and reglog are missing) #696

valassi · 2023-06-13T07:56:57Z

Add support for HRDCOD=1 builds of no_b_mass SM processes like pp_ttW

Unfortunately no_b_mass pp_ttW does not only fail to build HRDCOD=0 (#695), it also fails to build HRDCOD=1. This is how it fails

[avalassi@itscrd80 gcc11.2/cvmfs] /data/avalassi/GPU2023/madgraph4gpuX/epochX/cudacpp/pp_ttW.sa/SubProcesses/P0_Sigma_loop_sm_no_b_mass_dux_ttxwm> make HRDCOD=1
OMPFLAGS=-fopenmp
AVX=512y
FPTYPE=d
HELINL=0
HRDCOD=1
RNDGEN=hasCurand
Building in BUILDDIR=. for tag=512y_d_inl0_hrd1_hasCurand (USEBUILDDIR is not set)
make -C ../../src  -f cudacpp_src.mk
make[1]: Entering directory '/data/avalassi/GPU2023/madgraph4gpuX/epochX/cudacpp/pp_ttW.sa/src'
AVX=512y
ccache /cvmfs/sft.cern.ch/lcg/releases/gcc/11.2.0-ad950/x86_64-centos8/bin/g++  -O3  -std=c++17 -I.  -fPIC -Wall -Wshadow -Wextra -ffast-math  -fopenmp -march=skylake-avx512 -mprefer-vector-width=256  -DMGONGPU_FPTYPE_DOUBLE -DMGONGPU_FPTYPE2_DOUBLE -DMGONGPU_HARDCODE_PARAM -c Parameters_loop_sm_no_b_mass.cc -o Parameters_loop_sm_no_b_mass.o
In file included from Parameters_loop_sm_no_b_mass.cc:15:
Parameters_loop_sm_no_b_mass.h: In function ‘const Parameters_loop_sm_no_b_mass_dependentCouplings::DependentCouplings_sv Parameters_loop_sm_no_b_mass_dependentCouplings::computeDependentCouplings_fromG(const fptype_sv&)’:
Parameters_loop_sm_no_b_mass.h:291:46: error: ‘COND’ was not declared in this scope
  291 |       const fptype_sv mdl_GWcft_UV_t_1EPS_ = COND( mdl_MT, 0., -( ( mdl_G__exp__2 ) / ( 2. * 48. * ( ( M_PI ) * ( M_PI ) ) ) ) * 4. * mdl_TF );
      |                                              ^~~~
Parameters_loop_sm_no_b_mass.h:300:138: error: ‘reglog’ was not declared in this scope
  300 |       const fptype_sv mdl_G_UVt_FIN_ = COND( mdl_MT, 0., -( ( mdl_G__exp__2 ) / ( 2. * 48. * ( ( M_PI ) * ( M_PI ) ) ) ) * 4. * mdl_TF * reglog( mdl_MT__exp__2 / mdl_MU_R__exp__2 ) );
      |                                                                                                                                          ^~~~~~
make[1]: *** [cudacpp_src.mk:241: Parameters_loop_sm_no_b_mass.o] Error 1
make[1]: Leaving directory '/data/avalassi/GPU2023/madgraph4gpuX/epochX/cudacpp/pp_ttW.sa/src'
make: *** [makefile:520: ../../lib/libmg5amc_common.so] Error 2

The text was updated successfully, but these errors were encountered:

…se are no_b_mass SM processes (whose builds fail with madgraph5#695 and madgraph5#696)

…madgraph5#695 and/or madgraph5#696 are fixed)

…also affected by madgraph5#696 [avalassi@itscrd80 gcc11.2/cvmfs] /data/avalassi/GPU2023/madgraph4gpuX/epochX/cudacpp/nobm_gg_tt.sa/SubProcesses/P1_Sigma_loop_sm_no_b_mass_gg_ttx> make HRDCOD=1 OMPFLAGS=-fopenmp AVX=512y FPTYPE=d HELINL=0 HRDCOD=1 RNDGEN=hasCurand Building in BUILDDIR=. for tag=512y_d_inl0_hrd1_hasCurand (USEBUILDDIR is not set) make -C ../../src -f cudacpp_src.mk make[1]: Entering directory '/data/avalassi/GPU2023/madgraph4gpuX/epochX/cudacpp/nobm_gg_tt.sa/src' AVX=512y ccache /cvmfs/sft.cern.ch/lcg/releases/gcc/11.2.0-ad950/x86_64-centos8/bin/g++ -O3 -std=c++17 -I. -fPIC -Wall -Wshadow -Wextra -ffast-math -fopenmp -march=skylake-avx512 -mprefer-vector-width=256 -DMGONGPU_FPTYPE_DOUBLE -DMGONGPU_FPTYPE2_DOUBLE -DMGONGPU_HARDCODE_PARAM -c Parameters_loop_sm_no_b_mass.cc -o Parameters_loop_sm_no_b_mass.o In file included from Parameters_loop_sm_no_b_mass.cc:15: Parameters_loop_sm_no_b_mass.h: In function ‘const Parameters_loop_sm_no_b_mass_dependentCouplings::DependentCouplings_sv Parameters_loop_sm_no_b_mass_dependentCouplings::computeDependentCouplings_fromG(const fptype_sv&)’: Parameters_loop_sm_no_b_mass.h:291:46: error: ‘COND’ was not declared in this scope 291 | const fptype_sv mdl_GWcft_UV_t_1EPS_ = COND( mdl_MT, 0., -( ( mdl_G__exp__2 ) / ( 2. * 48. * ( ( M_PI ) * ( M_PI ) ) ) ) * 4. * mdl_TF ); | ^~~~ Parameters_loop_sm_no_b_mass.h:300:138: error: ‘reglog’ was not declared in this scope 300 | const fptype_sv mdl_G_UVt_FIN_ = COND( mdl_MT, 0., -( ( mdl_G__exp__2 ) / ( 2. * 48. * ( ( M_PI ) * ( M_PI ) ) ) ) * 4. * mdl_TF * reglog( mdl_MT__exp__2 / mdl_MU_R__exp__2 ) ); | ^~~~~~ make[1]: *** [cudacpp_src.mk:241: Parameters_loop_sm_no_b_mass.o] Error 1 make[1]: Leaving directory '/data/avalassi/GPU2023/madgraph4gpuX/epochX/cudacpp/nobm_gg_tt.sa/src' make: *** [makefile:520: ../../lib/libmg5amc_common.so] Error 2

… loop_) This fixes madgraph5#696 for this process (COND and reglog are not needed - see madgraph5#697)

…also affected by madgraph5#696 [avalassi@itscrd80 gcc11.2/cvmfs] /data/avalassi/GPU2023/madgraph4gpuX/epochX/cudacpp/nobm_gg_tt.sa/SubProcesses/P1_Sigma_loop_sm_no_b_mass_gg_ttx> make HRDCOD=1 OMPFLAGS=-fopenmp AVX=512y FPTYPE=d HELINL=0 HRDCOD=1 RNDGEN=hasCurand Building in BUILDDIR=. for tag=512y_d_inl0_hrd1_hasCurand (USEBUILDDIR is not set) make -C ../../src -f cudacpp_src.mk make[1]: Entering directory '/data/avalassi/GPU2023/madgraph4gpuX/epochX/cudacpp/nobm_gg_tt.sa/src' AVX=512y ccache /cvmfs/sft.cern.ch/lcg/releases/gcc/11.2.0-ad950/x86_64-centos8/bin/g++ -O3 -std=c++17 -I. -fPIC -Wall -Wshadow -Wextra -ffast-math -fopenmp -march=skylake-avx512 -mprefer-vector-width=256 -DMGONGPU_FPTYPE_DOUBLE -DMGONGPU_FPTYPE2_DOUBLE -DMGONGPU_HARDCODE_PARAM -c Parameters_loop_sm_no_b_mass.cc -o Parameters_loop_sm_no_b_mass.o In file included from Parameters_loop_sm_no_b_mass.cc:15: Parameters_loop_sm_no_b_mass.h: In function ‘const Parameters_loop_sm_no_b_mass_dependentCouplings::DependentCouplings_sv Parameters_loop_sm_no_b_mass_dependentCouplings::computeDependentCouplings_fromG(const fptype_sv&)’: Parameters_loop_sm_no_b_mass.h:291:46: error: ‘COND’ was not declared in this scope 291 | const fptype_sv mdl_GWcft_UV_t_1EPS_ = COND( mdl_MT, 0., -( ( mdl_G__exp__2 ) / ( 2. * 48. * ( ( M_PI ) * ( M_PI ) ) ) ) * 4. * mdl_TF ); | ^~~~ Parameters_loop_sm_no_b_mass.h:300:138: error: ‘reglog’ was not declared in this scope 300 | const fptype_sv mdl_G_UVt_FIN_ = COND( mdl_MT, 0., -( ( mdl_G__exp__2 ) / ( 2. * 48. * ( ( M_PI ) * ( M_PI ) ) ) ) * 4. * mdl_TF * reglog( mdl_MT__exp__2 / mdl_MU_R__exp__2 ) ); | ^~~~~~ make[1]: *** [cudacpp_src.mk:241: Parameters_loop_sm_no_b_mass.o] Error 1 make[1]: Leaving directory '/data/avalassi/GPU2023/madgraph4gpuX/epochX/cudacpp/nobm_gg_tt.sa/src' make: *** [makefile:520: ../../lib/libmg5amc_common.so] Error 2

… loop_) This fixes madgraph5#696 for this process (COND and reglog are not needed - see madgraph5#697)

…also affected by madgraph5#696 [avalassi@itscrd80 gcc11.2/cvmfs] /data/avalassi/GPU2023/madgraph4gpuX/epochX/cudacpp/nobm_gg_tt.sa/SubProcesses/P1_Sigma_loop_sm_no_b_mass_gg_ttx> make HRDCOD=1 OMPFLAGS=-fopenmp AVX=512y FPTYPE=d HELINL=0 HRDCOD=1 RNDGEN=hasCurand Building in BUILDDIR=. for tag=512y_d_inl0_hrd1_hasCurand (USEBUILDDIR is not set) make -C ../../src -f cudacpp_src.mk make[1]: Entering directory '/data/avalassi/GPU2023/madgraph4gpuX/epochX/cudacpp/nobm_gg_tt.sa/src' AVX=512y ccache /cvmfs/sft.cern.ch/lcg/releases/gcc/11.2.0-ad950/x86_64-centos8/bin/g++ -O3 -std=c++17 -I. -fPIC -Wall -Wshadow -Wextra -ffast-math -fopenmp -march=skylake-avx512 -mprefer-vector-width=256 -DMGONGPU_FPTYPE_DOUBLE -DMGONGPU_FPTYPE2_DOUBLE -DMGONGPU_HARDCODE_PARAM -c Parameters_loop_sm_no_b_mass.cc -o Parameters_loop_sm_no_b_mass.o In file included from Parameters_loop_sm_no_b_mass.cc:15: Parameters_loop_sm_no_b_mass.h: In function ‘const Parameters_loop_sm_no_b_mass_dependentCouplings::DependentCouplings_sv Parameters_loop_sm_no_b_mass_dependentCouplings::computeDependentCouplings_fromG(const fptype_sv&)’: Parameters_loop_sm_no_b_mass.h:291:46: error: ‘COND’ was not declared in this scope 291 | const fptype_sv mdl_GWcft_UV_t_1EPS_ = COND( mdl_MT, 0., -( ( mdl_G__exp__2 ) / ( 2. * 48. * ( ( M_PI ) * ( M_PI ) ) ) ) * 4. * mdl_TF ); | ^~~~ Parameters_loop_sm_no_b_mass.h:300:138: error: ‘reglog’ was not declared in this scope 300 | const fptype_sv mdl_G_UVt_FIN_ = COND( mdl_MT, 0., -( ( mdl_G__exp__2 ) / ( 2. * 48. * ( ( M_PI ) * ( M_PI ) ) ) ) * 4. * mdl_TF * reglog( mdl_MT__exp__2 / mdl_MU_R__exp__2 ) ); | ^~~~~~ make[1]: *** [cudacpp_src.mk:241: Parameters_loop_sm_no_b_mass.o] Error 1 make[1]: Leaving directory '/data/avalassi/GPU2023/madgraph4gpuX/epochX/cudacpp/nobm_gg_tt.sa/src' make: *** [makefile:520: ../../lib/libmg5amc_common.so] Error 2

…5#696 (NB: this was tested in June, but I am only committing this in July) Generation succeeds: ./CODEGEN/generateAndCompare.sh nobm_pp_ttW --mad Builds fail during launch: HRDCOD=1 tlau/lauX.sh -CPP nobm_pp_ttW ccache /usr/local/cuda-12.0/bin/nvcc -O3 -lineinfo -I. -I../../src -I/usr/local/cuda-12.0/include/ -DUSE_NVTX -gencode arch=compute_70,code=compute_70 -gencode arch=compute_70,code=sm_70 -use_fast_math -std=c++17 -ccbin /cvmfs/sft.cern.ch/lcg/releases/gcc/11.2.0-ad950/x86_64-centos8/bin/g++ -DMGONGPU_FPTYPE_DOUBLE -DMGONGPU_FPTYPE2_DOUBLE -DMGONGPU_HARDCODE_PARAM -Xcompiler -fPIC -c gMatrixElementKernels.cu -o gMatrixElementKernels.o ccache /cvmfs/sft.cern.ch/lcg/releases/gcc/11.2.0-ad950/x86_64-centos8/bin/g++ -O3 -std=c++17 -I. -fPIC -Wall -Wshadow -Wextra -ffast-math -fopenmp -march=skylake-avx512 -mprefer-vector-width=256 -DMGONGPU_FPTYPE_DOUBLE -DMGONGPU_FPTYPE2_DOUBLE -DMGONGPU_HARDCODE_PARAM -c Parameters_loop_sm_no_b_mass.cc -o Parameters_loop_sm_no_b_mass.o In file included from Parameters_loop_sm_no_b_mass.cc:15: Parameters_loop_sm_no_b_mass.h: In function ‘const Parameters_loop_sm_no_b_mass_dependentCouplings::DependentCouplings_sv Parameters_loop_sm_no_b_mass_dependentCouplings::computeDependentCouplings_fromG(const fptype_sv&)’: Parameters_loop_sm_no_b_mass.h:291:46: error: ‘COND’ was not declared in this scope 291 | const fptype_sv mdl_GWcft_UV_t_1EPS_ = COND( mdl_MT, 0., -( ( mdl_G__exp__2 ) / ( 2. * 48. * ( ( M_PI ) * ( M_PI ) ) ) ) * 4. * mdl_TF ); | ^~~~ Parameters_loop_sm_no_b_mass.h:300:138: error: ‘reglog’ was not declared in this scope 300 | const fptype_sv mdl_G_UVt_FIN_ = COND( mdl_MT, 0., -( ( mdl_G__exp__2 ) / ( 2. * 48. * ( ( M_PI ) * ( M_PI ) ) ) ) * 4. * mdl_TF * reglog( mdl_MT__exp__2 / mdl_MU_R__exp__2 ) ); | ^~~~~~ make[2]: *** [cudacpp_src.mk:240: Parameters_loop_sm_no_b_mass.o] Error 1

…ut loop_) (Note: two .py files have been added in nobm_pp_ttW.mad/bin/internal/ufomodel) This fixes madgraph5#696 in the build for this process (COND and reglog are not needed) However execution fails with IEEE floating point exceptions (FPE madgraph5#701) HRDCOD=1 tlau/lauX.sh -CPP nobm_pp_ttW INFO: Running Survey Creating Jobs Working on SubProcesses INFO: P1_gu_ttxwpd INFO: Building madevent in madevent_interface.py with 'CPP' matrix elements INFO: P1_gd_ttxwmu Note: The following floating-point exceptions are signalling: IEEE_INVALID_FLAG IEEE_DIVIDE_BY_ZERO IEEE_UNDERFLOW_FLAG IEEE_DENORMAL Note: The following floating-point exceptions are signalling: IEEE_INVALID_FLAG IEEE_DIVIDE_BY_ZERO IEEE_UNDERFLOW_FLAG IEEE_DENORMAL Note: The following floating-point exceptions are signalling: IEEE_INVALID_FLAG IEEE_DIVIDE_BY_ZERO IEEE_UNDERFLOW_FLAG IEEE_DENORMAL Note: The following floating-point exceptions are signalling: IEEE_INVALID_FLAG IEEE_DIVIDE_BY_ZERO IEEE_UNDERFLOW_FLAG IEEE_DENORMAL Note: The following floating-point exceptions are signalling: IEEE_INVALID_FLAG IEEE_DIVIDE_BY_ZERO IEEE_UNDERFLOW_FLAG IEEE_DENORMAL Note: The following floating-point exceptions are signalling: IEEE_INVALID_FLAG IEEE_DIVIDE_BY_ZERO IEEE_UNDERFLOW_FLAG IEEE_DENORMAL Note: The following floating-point exceptions are signalling: IEEE_INVALID_FLAG IEEE_DIVIDE_BY_ZERO IEEE_UNDERFLOW_FLAG IEEE_DENORMAL Note: The following floating-point exceptions are signalling: IEEE_INVALID_FLAG IEEE_DIVIDE_BY_ZERO IEEE_UNDERFLOW_FLAG IEEE_DENORMAL INFO: Building madevent in madevent_interface.py with 'CPP' matrix elements Note: The following floating-point exceptions are signalling: IEEE_INVALID_FLAG IEEE_DIVIDE_BY_ZERO IEEE_UNDERFLOW_FLAG IEEE_DENORMAL Note: The following floating-point exceptions are signalling: IEEE_INVALID_FLAG IEEE_DIVIDE_BY_ZERO IEEE_UNDERFLOW_FLAG IEEE_DENORMAL

valassi · 2023-07-21T15:11:50Z

I have renamed it to specify that it is loop_no_b_mass processes that fail with COND and REGLOG issues.

If one uses no_b_mass then the builds of pp_ttW are possible (see MR #706), but they are affected by other issues (like the FPEs in #701 and #733)

…also affected by madgraph5#696 [avalassi@itscrd80 gcc11.2/cvmfs] /data/avalassi/GPU2023/madgraph4gpuX/epochX/cudacpp/nobm_gg_tt.sa/SubProcesses/P1_Sigma_loop_sm_no_b_mass_gg_ttx> make HRDCOD=1 OMPFLAGS=-fopenmp AVX=512y FPTYPE=d HELINL=0 HRDCOD=1 RNDGEN=hasCurand Building in BUILDDIR=. for tag=512y_d_inl0_hrd1_hasCurand (USEBUILDDIR is not set) make -C ../../src -f cudacpp_src.mk make[1]: Entering directory '/data/avalassi/GPU2023/madgraph4gpuX/epochX/cudacpp/nobm_gg_tt.sa/src' AVX=512y ccache /cvmfs/sft.cern.ch/lcg/releases/gcc/11.2.0-ad950/x86_64-centos8/bin/g++ -O3 -std=c++17 -I. -fPIC -Wall -Wshadow -Wextra -ffast-math -fopenmp -march=skylake-avx512 -mprefer-vector-width=256 -DMGONGPU_FPTYPE_DOUBLE -DMGONGPU_FPTYPE2_DOUBLE -DMGONGPU_HARDCODE_PARAM -c Parameters_loop_sm_no_b_mass.cc -o Parameters_loop_sm_no_b_mass.o In file included from Parameters_loop_sm_no_b_mass.cc:15: Parameters_loop_sm_no_b_mass.h: In function ‘const Parameters_loop_sm_no_b_mass_dependentCouplings::DependentCouplings_sv Parameters_loop_sm_no_b_mass_dependentCouplings::computeDependentCouplings_fromG(const fptype_sv&)’: Parameters_loop_sm_no_b_mass.h:291:46: error: ‘COND’ was not declared in this scope 291 | const fptype_sv mdl_GWcft_UV_t_1EPS_ = COND( mdl_MT, 0., -( ( mdl_G__exp__2 ) / ( 2. * 48. * ( ( M_PI ) * ( M_PI ) ) ) ) * 4. * mdl_TF ); | ^~~~ Parameters_loop_sm_no_b_mass.h:300:138: error: ‘reglog’ was not declared in this scope 300 | const fptype_sv mdl_G_UVt_FIN_ = COND( mdl_MT, 0., -( ( mdl_G__exp__2 ) / ( 2. * 48. * ( ( M_PI ) * ( M_PI ) ) ) ) * 4. * mdl_TF * reglog( mdl_MT__exp__2 / mdl_MU_R__exp__2 ) ); | ^~~~~~ make[1]: *** [cudacpp_src.mk:241: Parameters_loop_sm_no_b_mass.o] Error 1 make[1]: Leaving directory '/data/avalassi/GPU2023/madgraph4gpuX/epochX/cudacpp/nobm_gg_tt.sa/src' make: *** [makefile:520: ../../lib/libmg5amc_common.so] Error 2

valassi · 2024-03-20T16:01:04Z

I am not sure why this is closed. I think that accidentally github has understood that f045418 was closing this, but actually that commit only handles no_b_mass models, which are fixed, while loop_no_b_mass models are NOT fixed.

As this issue specifically concerns loop_no_b_mass, I reopen it. In any case this is low priority for LO< because this model is really only needed for NLO iiuc.

I have regenerated loop_nobm_gg_tt.sa with the SMEFT changes in #632, and I confirm that the builds still fail. As in the past, the issues are COND and reglog (I will add this to the title).

This is HRDCOD=0

[avalassi@itscrd90 gcc11/usr] /data/avalassi/GPU2023/madgraph4gpuX/epochX/cudacpp/loop_nobm_gg_tt.sa/SubProcesses/P1_Sigma_loop_sm_no_b_mass_gg_ttx> make HRDCOD=0
makefile:148: HIP_HOME was not set: using ""
OMPFLAGS=-fopenmp 
AVX=512y
FPTYPE=d
HELINL=0
HRDCOD=0
HASCURAND=hasCurand
HASHIPRAND=hasNoHiprand
Building in BUILDDIR=. for tag=512y_d_inl0_hrd0_hasCurand_hasNoHiprand (USEBUILDDIR is not set)
make -C ../../src  -f cudacpp_src.mk
make[1]: Entering directory '/data/avalassi/GPU2023/madgraph4gpuX/epochX/cudacpp/loop_nobm_gg_tt.sa/src'
AVX=512y
ccache g++  -O3  -std=c++17 -I.  -fPIC -Wall -Wshadow -Wextra -ffast-math  -fopenmp  -march=skylake-avx512 -mprefer-vector-width=256  -DMGONGPU_FPTYPE_DOUBLE -DMGONGPU_FPTYPE2_DOUBLE -fPIC -c Parameters_loop_sm_no_b_mass.cc -o Parameters_loop_sm_no_b_mass.o
In file included from Parameters_loop_sm_no_b_mass.cc:15:
Parameters_loop_sm_no_b_mass.h: In function ‘const mg5amcCpu::Parameters_loop_sm_no_b_mass_dependentCouplings::DependentCouplings_sv mg5amcCpu::Parameters_loop_sm_no_b_mass_dependentCouplings::computeDependentCouplings_fromG(const fptype_sv&, const double*)’:
Parameters_loop_sm_no_b_mass.h:312:48: error: ‘COND’ was not declared in this scope
  312 |         const fptype_sv mdl_GWcft_UV_t_1EPS_ = COND( mdl_MT, 0., -( ( mdl_G__exp__2 ) / ( 2. * 48. * ( ( M_PI ) * ( M_PI ) ) ) ) * 4. * mdl_TF );
      |                                                ^~~~
Parameters_loop_sm_no_b_mass.h:314:73: error: ‘mdl_complexi’ was not declared in this scope
  314 |         constexpr cxsmpl<double> mdl_tMass_UV_1EPS_ = COND( mdl_MT, 0., mdl_complexi * ( ( mdl_G__exp__2 ) / ( 16. * ( ( M_PI ) * ( M_PI ) ) ) ) * 3. * mdl_CF * mdl_MT );
      |                                                                         ^~~~~~~~~~~~
Parameters_loop_sm_no_b_mass.h:321:140: error: ‘reglog’ was not declared in this scope
  321 |         const fptype_sv mdl_G_UVt_FIN_ = COND( mdl_MT, 0., -( ( mdl_G__exp__2 ) / ( 2. * 48. * ( ( M_PI ) * ( M_PI ) ) ) ) * 4. * mdl_TF * reglog( mdl_MT__exp__2 / mdl_MU_R__exp__2 ) );
      |                                                                                                                                            ^~~~~~
make[1]: *** [cudacpp_src.mk:251: Parameters_loop_sm_no_b_mass.o] Error 1
make[1]: Leaving directory '/data/avalassi/GPU2023/madgraph4gpuX/epochX/cudacpp/loop_nobm_gg_tt.sa/src'
make: *** [makefile:681: ../../lib/libmg5amc_common.so] Error 2

And this is HRDCOD=1

[avalassi@itscrd90 gcc11/usr] /data/avalassi/GPU2023/madgraph4gpuX/epochX/cudacpp/loop_nobm_gg_tt.sa/SubProcesses/P1_Sigma_loop_sm_no_b_mass_gg_ttx> make HRDCOD=1
makefile:148: HIP_HOME was not set: using ""
OMPFLAGS=-fopenmp 
AVX=512y
FPTYPE=d
HELINL=0
HRDCOD=1
HASCURAND=hasCurand
HASHIPRAND=hasNoHiprand
Building in BUILDDIR=. for tag=512y_d_inl0_hrd1_hasCurand_hasNoHiprand (USEBUILDDIR is not set)
make -C ../../src  -f cudacpp_src.mk
make[1]: Entering directory '/data/avalassi/GPU2023/madgraph4gpuX/epochX/cudacpp/loop_nobm_gg_tt.sa/src'
AVX=512y
ccache g++  -O3  -std=c++17 -I.  -fPIC -Wall -Wshadow -Wextra -ffast-math  -fopenmp  -march=skylake-avx512 -mprefer-vector-width=256  -DMGONGPU_FPTYPE_DOUBLE -DMGONGPU_FPTYPE2_DOUBLE -DMGONGPU_HARDCODE_PARAM -fPIC -c Parameters_loop_sm_no_b_mass.cc -o Parameters_loop_sm_no_b_mass.o
In file included from Parameters_loop_sm_no_b_mass.cc:15:
Parameters_loop_sm_no_b_mass.h: In function ‘const mg5amcCpu::Parameters_loop_sm_no_b_mass_dependentCouplings::DependentCouplings_sv mg5amcCpu::Parameters_loop_sm_no_b_mass_dependentCouplings::computeDependentCouplings_fromG(const fptype_sv&, const double*)’:
Parameters_loop_sm_no_b_mass.h:312:48: error: ‘COND’ was not declared in this scope
  312 |         const fptype_sv mdl_GWcft_UV_t_1EPS_ = COND( mdl_MT, 0., -( ( mdl_G__exp__2 ) / ( 2. * 48. * ( ( M_PI ) * ( M_PI ) ) ) ) * 4. * mdl_TF );
      |                                                ^~~~
Parameters_loop_sm_no_b_mass.h:321:140: error: ‘reglog’ was not declared in this scope
  321 |         const fptype_sv mdl_G_UVt_FIN_ = COND( mdl_MT, 0., -( ( mdl_G__exp__2 ) / ( 2. * 48. * ( ( M_PI ) * ( M_PI ) ) ) ) * 4. * mdl_TF * reglog( mdl_MT__exp__2 / mdl_MU_R__exp__2 ) );
      |                                                                                                                                            ^~~~~~
make[1]: *** [cudacpp_src.mk:251: Parameters_loop_sm_no_b_mass.o] Error 1
make[1]: Leaving directory '/data/avalassi/GPU2023/madgraph4gpuX/epochX/cudacpp/loop_nobm_gg_tt.sa/src'
make: *** [makefile:681: ../../lib/libmg5amc_common.so] Error 2

valassi · 2024-03-20T16:02:39Z

I renamed it, and also removed HRDCOD=1 from the title. Both HRDCOD=0 and HRDCOD=1 builds fail.

valassi added a commit to valassi/madgraph4gpu that referenced this issue Jun 13, 2023

[ttV] rename ttW and ttZ processes from ATLAS as nobm_xxx to note the…

bb41be2

…se are no_b_mass SM processes (whose builds fail with madgraph5#695 and madgraph5#696)

valassi added a commit to valassi/madgraph4gpu that referenced this issue Jun 13, 2023

[ttV] add ttW and ttZ with non-zero b mass (TEMPORARY! until no_b_mass …

74be7c6

…madgraph5#695 and/or madgraph5#696 are fixed)

This was referenced Jun 13, 2023

Add ttV to code generation #697

Merged

Add new hardcoded vectorized-C++ implementations of COND and REGLOG for NLO models #698

Open

valassi added a commit to valassi/madgraph4gpu that referenced this issue Jun 14, 2023

[nobm] add nobm_gg_tt.sa to the repo - this is affected by madgraph5#696

54e3fa7

valassi added a commit to valassi/madgraph4gpu that referenced this issue Jun 14, 2023

[nobm] regenerate nobm_gg_tt.sa after moving to sm-no_b_mass (without…

3b66c1c

… loop_) This fixes madgraph5#696 for this process (COND and reglog are not needed - see madgraph5#697)

valassi added a commit to valassi/madgraph4gpu that referenced this issue Jun 14, 2023

[nobm] add nobm_gg_tt.sa to the repo - this is affected by madgraph5#696

2b60c27

valassi added a commit to valassi/madgraph4gpu that referenced this issue Jun 14, 2023

[nobm] regenerate nobm_gg_tt.sa after moving to sm-no_b_mass (without…

2132516

… loop_) This fixes madgraph5#696 for this process (COND and reglog are not needed - see madgraph5#697)

valassi mentioned this issue Jun 14, 2023

fix FPEs and debug nobm_pp_ttW for ATLAS #706

Merged

valassi added a commit to valassi/madgraph4gpu that referenced this issue Jul 21, 2023

[nobm] add nobm_gg_tt.sa to the repo - this is affected by madgraph5#696

4c53ea2

valassi changed the title ~~Add support for HRDCOD=1 builds of no_b_mass SM processes like pp_ttW~~ Add support for HRDCOD=1 builds of loop_no_b_mass SM processes like pp_ttW Jul 21, 2023

valassi mentioned this issue Jul 21, 2023

Various issues with HRDCOD=0 and HRDCOD=1 builds of no_b_mass and loop_no_b_mass SM processes #695

Closed

valassi closed this as completed in f045418 Dec 16, 2023

valassi reopened this Mar 20, 2024

valassi changed the title ~~Add support for HRDCOD=1 builds of loop_no_b_mass SM processes like pp_ttW~~ Fix loop_no_b_mass SM processes (COND and reglog are missing) Mar 20, 2024

Provide feedback

Saved searches

Use saved searches to filter your results more quickly

Fix loop_no_b_mass SM processes (COND and reglog are missing) #696

Fix loop_no_b_mass SM processes (COND and reglog are missing) #696

valassi commented Jun 13, 2023

valassi commented Jul 21, 2023

valassi commented Mar 20, 2024 •

edited

Loading

valassi commented Mar 20, 2024

Fix loop_no_b_mass SM processes (COND and reglog are missing) #696

Fix loop_no_b_mass SM processes (COND and reglog are missing) #696

Comments

valassi commented Jun 13, 2023

valassi commented Jul 21, 2023

valassi commented Mar 20, 2024 • edited Loading

valassi commented Mar 20, 2024

valassi commented Mar 20, 2024 •

edited

Loading