Merge pull request #33 from eyalyoli/master

translate to english

README.md

@@ -1,38 +1,71 @@
 # Android-SerialPort-API
+[Fork](https://code.google.com/archive/p/android-serialport-api/)自Google开源的Android串口通信Demo，修改成Android Studio项目 
 
-**Gradle 引用**
+This lib is a [fork](https://code.google.com/archive/p/android-serialport-api/) of the Android serial port communication Demo open sourced by Google.
 
-添加依赖
+## Installation & Usage
+**Gradle**
+
+添加依赖:
+
+Add the dependency:
 
 ```
 dependencies {
         implementation 'com.licheedev:android-serialport:2.1.2'
 }
 ```
 
-**修改`su`路径**
+**Import**
+
+```java
+import android.serialport.SerialPort;
+```
+
+**`su` path**
+
+In order to read/write to a serial port in Android you'll need `su` binary installed on device (this can be done by rooting the device). Usually Android devices that has the ability to communicate with serial ports have `su` installed on the default path `"/system/bin/su"`. To change this use:
 
 ```java
 // su默认路径为 "/system/bin/su"
+// The default path of su is "/system/bin/su"
 // 可通过此方法修改
+// If the path is different then change it using this
 SerialPort.setSuPath("/system/xbin/su");
 ```
 
-**可选配置数据位、校验位、停止位**
-
-实现方式参考
-> https://juejin.im/post/5c010a19e51d456ac27b40fc
+**Usage**
 
 ```java
-
 // 默认8N1(8数据位、无校验位、1停止位)
+// Default 8N1 (8 data bits, no parity bit, 1 stop bit)
 SerialPort serialPort = new SerialPort(path, baudrate);
 
-// 7E2(7数据位、偶校验、2停止位)
-SerialPort serialPort = SerialPort //
-    .newBuilder(path, baudrate) // 串口地址地址，波特率
-    .parity(2) // 校验位；0:无校验位(NONE，默认)；1:奇校验位(ODD);2:偶校验位(EVEN)
-    .dataBits(7) // 数据位,默认8；可选值为5~8
-    .stopBits(2) // 停止位，默认1；1:1位停止位；2:2位停止位
+// 可选配置数据位、校验位、停止位 - 7E2(7数据位、偶校验、2停止位)
+// or with builder (with optional configurations) - 7E2 (7 data bits, even parity, 2 stop bits)
+SerialPort serialPort = SerialPort 
+    .newBuilder(path, baudrate)
+// 校验位；0:无校验位(NONE，默认)；1:奇校验位(ODD);2:偶校验位(EVEN)
+// Check bit; 0: no check bit (NONE, default); 1: odd check bit (ODD); 2: even check bit (EVEN)
+//    .parity(2) 
+// 数据位,默认8；可选值为5~8
+// Data bit, default 8; optional value is 5~8
+//    .dataBits(7) 
+// 停止位，默认1；1:1位停止位；2:2位停止位
+// Stop bit, default 1; 1:1 stop bit; 2: 2 stop bit
+//    .stopBits(2) 
     .build();
+
+// read/write to serial port - needs to be in different thread!
+InputStream in = serialPort.getInputStream();
+OutputStream out = serialPort.getOutputStream();
+
+// close
+serialPort.tryClose();
 ```
+
+实现方式参考
+
+Implementation reference
+1. Check [sample project](https://github.com/licheedev/Android-SerialPort-API/tree/master/sample)
+2. https://juejin.im/post/5c010a19e51d456ac27b40fc