Merge pull request #1210 from nehenemilabs/master

Added gamepad profiles for STK-7039RG

udev/7039RG.cfg

@@ -0,0 +1,82 @@
+# SAITEK STK-7039RG Controller
+# Features:
+#   Bluetooth and wired connection
+#   RGB Color swith
+#   Nintendo switch, Android, XBox and Wired modes.
+#   6 Axis gyro.
+#
+# This profile is related to Android/Linux mode.
+# 
+# This controller can switch to differente modes pressing Home button + Y,X,A buttons or Connected via USB C cable:
+#
+# Pairing Mode
+#   Nintendo Switch Mode
+#     Press simultaneusly HOME + Y Nintendo Switch Mode, Indicator LEDS *---
+#     Wake up and reconnect: Press HOME for 3 seconds.
+#   
+#   Android/Linux Mode
+#     Press simultaneusly HOME + X Android Mode, Indicator LEDS *--*
+#     Scan & connect to STK-7039RG
+#     Reconnect: Press HOME until power on
+#   
+#   XBOX Mode  
+#     Press simultaneusly HOME + A, XBOX Wireless Mode, Indicator LEDS ***-
+#     Scan & connect to Xbox Wireless Controller.
+#     Reconnect: Press HOME until power on
+#
+#   PC Wired mode:
+#     Using a USB C cable, Pressing HOME button switch to XINPUT or DINPUT modes
+#            XINPUT Mode, Indicator LEDS ***-
+#            DINPUT Mode, Indicator LEDS *--*
+# 
+# TURBO/AUTO Mode, can be set for A,B,X,Y,L,ZL,R,ZL buttons
+# Enable/disable:
+#    1. Press TURBO button and the function simultaneously
+#    2. If you press again the same combination turns into AUTO firing mode.
+#    3. If you press again the same combination turn off AUTO firinf mode.
+# Adjust TURBO speed:
+#    1. Press TURBO button simultaneusly with directional up/down.
+#    2. Press TURBO button + UP increases speed
+#    3. Press TURBO button + DOWN decreases speed
+# Clear TURBO/AUTO
+#    1. Press TURBO for 5 seconds, wait the LED 1,2,3,4 light and turn to flashes together with 1 second's vibration.
+#       Then all TURBO functions will be clear
+#
+# Adjust vibration intensity
+#    1. Press L,LZ,R,ZR simultaneusly for 5 seconds. Release when vibrate
+#    2. The vibration intensity will switch intensity from strongest to none on each repetition.
+# RGB Light control
+#   Light button is located down right of the right analog stick
+#   Short press switch color modes.
+#   Long press turn on/off
+
+input_devie_display_name="SAITEK STK-7039RG"
+
+input_driver = "udev"
+input_device = "7039RG"
+input_vendor_id = "6473"
+input_product_id = "1026"
+input_b_btn = "1"
+input_y_btn = "4"
+input_select_btn = "10"
+input_start_btn = "11"
+input_up_btn = "h0up"
+input_down_btn = "h0down"
+input_left_btn = "h0left"
+input_right_btn = "h0right"
+input_a_btn = "0"
+input_x_btn = "3"
+input_l_btn = "6"
+input_r_btn = "7"
+input_l2_btn = "8"
+input_r2_btn = "9"
+input_l3_btn = "13"
+input_r3_btn = "14"
+input_l_x_plus_axis = "+0"
+input_l_x_minus_axis = "-0"
+input_l_y_plus_axis = "+1"
+input_l_y_minus_axis = "-1"
+input_r_x_plus_axis = "+2"
+input_r_x_minus_axis = "-2"
+input_r_y_plus_axis = "+3"
+input_r_y_minus_axis = "-3"

udev/Afterglow Prismatic Wired Controller.cfg

@@ -0,0 +1,28 @@
+input_driver = "udev"
+input_device = "Afterglow Prismatic Wired Controller"
+input_vendor_id = "3695"
+input_product_id = "313"
+input_b_btn = "1"
+input_y_btn = "3"
+input_select_btn = "6"
+input_start_btn = "7"
+input_up_btn = "h0up"
+input_down_btn = "h0down"
+input_left_btn = "h0left"
+input_right_btn = "h0right"
+input_a_btn = "0"
+input_x_btn = "2"
+input_l_btn = "4"
+input_r_btn = "5"
+input_l2_axis = "+2"
+input_r2_axis = "+5"
+input_l3_btn = "9"
+input_r3_btn = "10"
+input_l_x_plus_axis = "+0"
+input_l_x_minus_axis = "-0"
+input_l_y_plus_axis = "+1"
+input_l_y_minus_axis = "-1"
+input_r_x_plus_axis = "+3"
+input_r_x_minus_axis = "-3"
+input_r_y_plus_axis = "+4"
+input_r_y_minus_axis = "-4"

udev/SHANWAN Android Gamepad.cfg

@@ -0,0 +1,53 @@
+# This is for the Gamepads Using SHANWAN controllers you can add more if you found the same configuration
+#
+# Controllers:
+# Acteck g100,  
+#
+#
+# MODES
+# You can switch modes pressing for 5 minutes the mode button
+#   Android/Linux
+#	    LED Indicator   -
+#			    -
+#			    *
+#			    *
+#   PS3/PC
+#	    LED Indicator   *
+#			    -
+#			    *
+#			    -
+#   PC/Xbox
+#	    LED Indicator   *
+#			    *
+#			    -
+#			    -
+
+input_driver = "udev"
+input_device = "SHANWAN Android Gamepad"
+input_vendor_id = "9571"
+input_product_id = "1318"
+input_b_btn = "1"
+input_y_btn = "4"
+input_select_btn = "10"
+input_start_btn = "11"
+input_up_btn = "h0up"
+input_down_btn = "h0down"
+input_left_btn = "h0left"
+input_right_btn = "h0right"
+input_a_btn = "0"
+input_x_btn = "3"
+input_l_btn = "6"
+input_r_btn = "7"
+input_l2_btn = "8"
+input_r2_btn = "9"
+input_l3_btn = "13"
+input_r3_btn = "14"
+input_l_x_plus_axis = "+0"
+input_l_x_minus_axis = "-0"
+input_l_y_plus_axis = "+1"
+input_l_y_minus_axis = "-1"
+input_r_x_plus_axis = "+2"
+input_r_x_minus_btn = "0"
+input_r_y_plus_axis = "+3"
+input_r_y_minus_axis = "-3"
+input_r_x_minus_axis = "-2"

udev/ZhiXu Gamepad.cfg

@@ -0,0 +1,81 @@
+# SAITEK STK-7039RG Controller
+# Features:
+#   Bluetooth and wired connection
+#   RGB Color swith
+#   Nintendo switch, Android, XBox and Wired modes.
+#   6 Axis gyro.
+#
+# This profile is related to ZhiXu mode, mostly always wired.
+# 
+# This controller can switch to differente modes pressing Home button + Y,X,A buttons or Connected via USB C cable:
+#
+# Pairing Mode
+#   Nintendo Switch Mode
+#     Press simultaneusly HOME + Y Nintendo Switch Mode, Indicator LEDS *---
+#     Wake up and reconnect: Press HOME for 3 seconds.
+#   
+#   Android/Linux Mode
+#     Press simultaneusly HOME + X Android Mode, Indicator LEDS *--*
+#     Scan & connect to STK-7039RG
+#     Reconnect: Press HOME until power on
+#   
+#   XBOX Mode  
+#     Press simultaneusly HOME + A, XBOX Wireless Mode, Indicator LEDS ***-
+#     Scan & connect to Xbox Wireless Controller.
+#     Reconnect: Press HOME until power on
+#
+#   PC Wired mode:
+#     Using a USB C cable, Pressing HOME button switch to XINPUT or DINPUT modes
+#            XINPUT Mode, Indicator LEDS ***-
+#            DINPUT Mode, Indicator LEDS *--*
+# 
+# TURBO/AUTO Mode, can be set for A,B,X,Y,L,ZL,R,ZL buttons
+# Enable/disable:
+#    1. Press TURBO button and the function simultaneously
+#    2. If you press again the same combination turns into AUTO firing mode.
+#    3. If you press again the same combination turn off AUTO firinf mode.
+# Adjust TURBO speed:
+#    1. Press TURBO button simultaneusly with directional up/down.
+#    2. Press TURBO button + UP increases speed
+#    3. Press TURBO button + DOWN decreases speed
+# Clear TURBO/AUTO
+#    1. Press TURBO for 5 seconds, wait the LED 1,2,3,4 light and turn to flashes together with 1 second's vibration.
+#       Then all TURBO functions will be clear
+#
+# Adjust vibration intensity
+#    1. Press L,LZ,R,ZR simultaneusly for 5 seconds. Release when vibrate
+#    2. The vibration intensity will switch intensity from strongest to none on each repetition.
+# RGB Light control
+#   Light button is located down right of the right analog stick
+#   Short press switch color modes.
+#   Long press turn on/off
+
+
+input_driver = "udev"
+input_device = "ZhiXu Gamepad"
+input_vendor_id = "121"
+input_product_id = "6172"
+input_b_btn = "1"
+input_y_btn = "4"
+input_select_btn = "10"
+input_start_btn = "11"
+input_up_btn = "h0up"
+input_down_btn = "h0down"
+input_left_btn = "h0left"
+input_right_btn = "h0right"
+input_a_btn = "0"
+input_x_btn = "3"
+input_l_btn = "6"
+input_r_btn = "7"
+input_l2_btn = "8"
+input_r2_btn = "9"
+input_l3_btn = "13"
+input_r3_btn = "14"
+input_l_x_plus_axis = "+0"
+input_l_x_minus_axis = "-0"
+input_l_y_plus_axis = "+1"
+input_l_y_minus_axis = "-1"
+input_r_x_plus_axis = "+2"
+input_r_x_minus_axis = "-2"
+input_r_y_plus_axis = "+3"
+input_r_y_minus_axis = "-3"