Skip to content

letsRobot/letsrobot

Repository files navigation

LetsRobot.tv

We're in Beta!

This repo is officially ready for public use, but we're still working out some kinks. If you find something's wrong, we would love to hear it! Message us on discord, and if it's a problem with our code, we'll make a bug report and fix it!

We are officially testing the new robot side code

We've re-written the entire robot side code to be more modular and easily extendable. It's still in the testing phase, but everything needed to run a robot is there.

A few highlights:

  • Everything is modular, with a .conf file instead of using text parameters
  • Extending scripts is done in separate files
  • Default support for more robots
  • Includes most features avaible with current repo

We are also developing a GUI to help make the setup process easier. Shout out to Nocturnal, Roy, and Skeeter for making a more awesome developer friendly tool! We still need to test on more robots before we can make the official switch, and we still need to do more documentation. We highly encourage you to give this a shot and let us know if you run into any issues.

Open Robot Control Code For Connecting to LetsRobot.tv

LetsRobot.tv is a robotic telepresence network. Anyone can connect a robot and allow users all over the world to interact with it. Our vision is to have a social platform that powers robots worldwide. These robots will be controlled by the crowd to offer experiences unlike that of any current media experience, turning passive viewers into active doers.

You can find additional documentation including information about our API on our readme.io page as well.

Initializing and Setting up the Raspberry Pi

The brain of your robot is the Raspberry Pi, it connects everything to LetsRobot.tv and runs all of the hardware. The first step is to set up your Pi.

  1. Flash a MicroSD Card

    Start by flashing an 8GB microSD card on your PC or Mac. You will need a micro SD card reader, or an adapter and a standard SD card reader.

    Download Etcher and flash an 8GB (or more) micro SD card with the Raspian Stretch Lite disk image (.img file). You can also do it manually.

  2. Connect to your Raspberry Pi

    If it is your first time with a Raspberry Pi you should connect an HDMI monitor and keyboard as well as power the Pi with a quality micro USB cord with a power supply that is providing 5V and at least 2.0 amps. The official Raspberry Pi power supplyprovides 5V 2.5 amps.

    One of the major issues most robot builders come across is poor quality USB Power packs and USB cables. Many batteries will not actually provide the amperage they say they are rated for. The Raspberry Pi should optimally be run at a steady 5V 2.4amps

    We will be doing things in a non GUI (Graphical User Interface) fashion and instead setting things up using the command line. This is so that you begin to better familiarize yourself with programming and navigating the brain of your robot this way. There are many ways to do this part but learning to navigate the terminal and command line will be important an important step.

    You can find some commonly used commands or the raspberry pi here.

  3. The login prompt

    Once your raspberry pi has finished booting, the first prompt you should see is the login prompt. Enter the default username and pasword.

    Username: pi 
    Password: raspberry
    
  4. Update before you do anything else

    Before changing anything, you should update so your raspberry pi has the latest software.

    sudo apt update
    sudo apt upgrade -y
    
  5. Set Up your Raspberry Pi using raspi-config

    1. Enter raspi-config by entering the following at the command prompt:

      sudo raspi-config

    2. If this is your first time running raspi-config, it will ask you to Setup Locale, Timezone, and Wifi Country as soon as you start raspi-config. Choose appropriate settings for your location.

    3. Change your password! This is very important as leaving the password as the default, will allow anyone on the same network to gain direct access to you robot. raspi-config main screen

    4. Network Options. Add your wifi SSID and Password, if that fails to connect try these instructions after exiting raspi-config. raspi-config networking options screen

    5. Interfacing Options. Enable SSH, you will want to be able to connect to your robot using your computer remote. If for no other reason to copy and paste the command line instructions to avoid typos. You may want to also enable I2C here if you plan on using the Adafruit Motor Hat or others that use I2C. raspi-config interfacing options screen

    6. Exit the Raspi-config. To exit use your right arrow key to move and select <Back>, hit enter. Then do the same thing to select the <Finish> button.

  6. Reboot your Raspberry Pi

    To restart your Raspberry Pi, type the following into the command prompt: sudo reboot

    When you reboot to the command line your IP address should be shown in the last few messages before the login prompt. Write it down.

  7. Connect via SSH to your Raspberry Pi

    Switch over to your computer on the connected to the same network as the Raspberry pi is connected.

    1. Open the Terminal program on your PC or Mac.

      ssh pi@YOUR-PI-IPADDRESS

    2. Enter your login details.

    username: pi 
    password: the new password you just set
    
    1. Copy and paste all of the commands below into the terminal instead of typing them arduously line by line.
  8. Update your Raspberry Pi

    Run the following command through the ssh terminal. sudo apt-get update

Create A Robot on Your LetsRobot.tv Account

  1. Load LetsRobot.tv and select sign up / log in on the upper right of the page.

  2. Login or create an account

    letsrobot login

  3. Navigate to your profile and click + Add a new Robot!

    letsrobot add new

  4. Now edit your new robot.

    letsrobot create new robot

  5. Fill out the Name and Description, then select a resolution.

    letsrobot robot profile

  6. Enter a Stream Key and BE SURE TO SAVE

    letsrobot robot settings

Using the Optional Guided Install Script

We made an installer to get you up and running as quickly as we can! All you need to do is follow the on-screen prompts.

  1. Copy and paste this command into a terminal.
wget -O - https://raw.githubusercontent.com/letsRobot/letsrobot/master/scripts/install.sh | bash -
  1. If you are ready to install, press enter on your keyboard. install-1

  2. Enter the username you signed up for LetsRobot with. Install-2

  3. Enter your robot ID. Install-3

  4. Enter your camera ID. Install-4

  5. Select your robot type. You need to select your choice with space before pressing enter. Install-5

  6. Enter your stream key. If you did not set one, your stream key is hello. Install-6

  7. Installation is complete. It is safe to reboot your robot or you can run it manually by running python letsrobot.py in the letsrobot directory. Install-7

Installing LetsRobot control scripts on a Raspberry Pi

The RasPi will need the following things install so it can talk to your motors and talk to the internet. Make sure you don’t get any errors in the console when doing the step below. If you have an issue, you can run this line again, and that will usually fix it!

  1. Install the required software libraries and tools. Make sure you don’t get any errors in the console when doing the step below. If you have an issue, you can run this line again, and that will usually fix it!

    sudo apt-get install ffmpeg python-serial python-dev libgnutls28-dev espeak python-smbus python-pip libttspico-utils git
    
  2. Download the LetsRobot control scripts from our github

    git clone https://github.com/letsRobot/letsrobot.git ~/letsrobot
    
  3. Install python requirements

    sudo python -m pip install -r ~/letsrobot/requirements.txt
    
  4. Open the new letsrobot directory

    cd letsrobot
    
  5. Copy letsrobot.sample.conf to letsrobot.conf

    cp letsrobot.sample.conf letsrobot.conf
    

Configure the controller

  1. Edit the letsrobot.conf file created in the previous section.

    nano letsrobot.conf
    
  2. Configure the [robot] section

    • owner should be the username you have registered the robot under on the LetsRobot site.
    • robot_id should be the robot ID for your robot, obtained in step 2 of the Bring your Bot to life section.
    • camera_id should be the camera ID for your robot, obtained in same step as robot ID.
    • turn_delay is only used by the motor_hat and mdd10. This changes how long your bot turns for. I suggest you leave this at the default value until after you bot is moving.
    • straight_delay is only used by the motor_hat and mdd10. This changes how long your bot turns for. I suggest you leave this at the default value until after you bot is moving.
    • type should be the hardware type for the motor controller of your bot. Available types are currently.
      • adafruit_pwm
      • cozmo
      • gopigo2
      • gopigo3
      • l298n
      • maestro-servo
      • max7219
      • mc33926
      • mdd10
      • motor_hat
      • motozero
      • none
      • owi_arm
      • pololu
      • serial_board
      • telly
    • Configure your hardwares section. Each hardware type can have their own section it the controller. Look through the file for a section named the same as your hardware controller. If the section exists, read through it and adjust the variable as required.
  3. Configure the [camera] section

    • no-mic This allows the microphone to be disabled.
    • no-camera This allows the camera to be disabled.
    • type This sets the audio / video handler to use. Currently only ffmpeg and ffmpeg-arecord are supported.
    • x_res Sets the resolution for the x axis.
    • y_res Sets the resolution for the y axis.
    • camera_device Sets the device name for the camera.
    • audio_hw_num Set the audio hardware number for the microphone.
  4. Configure the [tts] section

    • tts_volume This is the volume level you want your bot to start with.
    • anon_tts This allows you to enable or disable anonymous users access to your bots TTS features.
    • filter_url_tts This option allows URLs pasted into chat to be blocked from the TTS function.
    • ext_chat This enables or disables the extended chat functions.
    • hw_hum This is the ALSA hardware number for your pi. 0 is the first sound card and should work for most bots.
    • type should be the type of TTS software you are using. The currently supported TTS types are. espeak was installed in the previous steps, and makes a good default tts.
      • espeak
      • fesitval
      • pico
      • Amazon Polly
      • cozmo_tts

Setting up your start_robot file on the Raspberry Pi

  1. Copy the start_robot script to your home directory.

    cp ~/letsrobot/scripts/start_robot ~

  2. Add the startup script to the crontab

    crontab -e 
    

    Note: If you accidently use the wrong editor try

    EDITOR=nano crontab -e

  3. Insert the following text at the bottom

    @reboot /bin/bash /home/pi/start_robot

    Example:

    # Edit this file to introduce tasks to be run by cron.
    #
    # Each task to run has to be defined through a single line
    # indicating with different fields when the task will be run
    # and what command to run for the task
    #
    # To define the time you can provide concrete values for
    # minute (m), hour (h), day of month (dom), month (mon),
    # and day of week (dow) or use '*' in these fields (for 'any').#
    # Notice that tasks will be started based on the cron's system
    # daemon's notion of time and timezones.
    #
    # Output of the crontab jobs (including errors) is sent through
    # email to the user the crontab file belongs to (unless redirected).
    #
    # For example, you can run a backup of all your user accounts
    # at 5 a.m every week with:
    # 0 5 * * 1 tar -zcf /var/backups/home.tgz /home/
    #
    # For more information see the manual pages of crontab(5) and cron(8)
    #
    # m h  dom mon dow   command
    
    @reboot /bin/bash /home/pi/start_robot
    
  4. Now just plug in the Camera and USB Speaker and reboot

    sudo reboot

Hopefully you’ll hear your robot say “OK” and everything will be working! If not, it is time to checking the Technical FAQ and Troubleshooting Tips. Also drop in to our Discord Channel and ask for help.

How does this work

We use ffmpeg to stream audio and socket.io to send control messages.

How to contribute

The is a community project. Making your own bot? Adding your own control stuff? Cool! We'd like to hear from you. Drop in to our Discord Channel and say Hi!

Hardware Compatibility

The following hardware is supported.

  • Adafruit Motor Hat
  • Adafruit PWM / Servo Hat
  • Anki Cozmo
  • GoPiGo 2
  • GoPiGo 3
  • L298N Dual Motor Controller
  • Pololu Maestro Servo Controller (experimental)
  • MAX7219 SPI Led Driver
  • Pololu Dual MC33926 Motor Driver (experimental)
  • Pololu DRV8835 Dual Motor Driver
  • Cytron MDD10 10 Amp Motor Driver
  • MotoZero 4 Motor Controller
  • OWI 535 Robotic Arm (USB controller)
  • Serial Based controllers (Parallaxy or Arduinos)
  • MQTT Publish commands to a local MQTT Broker

Missing something?, you can add it, open source! Instructions for adding new hardware can be found here.

Chat Commands

When ext_chat is enabled, the following chat commands are available. To use, just type them into the chat box on your bots page. These chat commands have no effect on how the site behaves, they only affect the bot. There are some functions that duplicate functions on the site. These changes are not saved and are lots on reboot.

  • .devmode X Set dev mode. In dev mode, only the owner can drive. If demode is set to mods, your local mods can also drive [on|off|mods].
  • .anon control X Sets if anonymous users can drive your bot [on|off].
  • .anon tts X Sets if anonymous users messages are passed to TTS [on|of].
  • .anon X Sets both anonymous control and tts access [on|off].
  • .tts X Mute the bots TTS [mute|unmute]
  • .ban NAME Ban user NAME from controlling your bots
  • .unban NAME remove user NAME from the ban list
  • .timeout NAME Timeout user NAME from controlling your bots for 5 minutes
  • .untimout NAME remove user NAME from the timeout list.
  • .brightness X set the camera brightness [0..255]
  • .contrast X set the camera contrast [0..255]
  • .saturation X set the camera saturation [0..255]
  • .stationary Toggles stationary mode on and off. When enabled, forward / backward commands will be blocked.

Hardware modules can have their own hardware specific TTS commands.

Instructions for Specific Hardware Configurations

Cozmo

For Anki Cozmo on Mac or Linux, please see the intructions here. For Windows instructions, please see the instructions here.

GoPiGo3

For GoPiGo3, you will need to install the gopigo3 python module (which is different than older versions). It will need to be installed with the installation script from Dexter. Also, PYTHONPATH needs to be set to "/home/pi/Dexter/GoPiGo3/Software/Python"

Refer to this: https://github.com/DexterInd/GoPiGo3

sudo git clone http://www.github.com/DexterInd/GoPiGo3.git /home/pi/Dexter/GoPiGo3
sudo bash /home/pi/Dexter/GoPiGo3/Install/install.sh
sudo reboot

Adafruit Motor Hat

Install motor HAT software:

Adafruit PWM / Servo Hat

Install PWM / Servo hat software

Pololu Maestro Servo Controller

Install Maestro Servon controller library into the hardware/ subdirectory.

Pololu DRV8835 Motor Driver

Install DRV8835 Motor Driver library

Pololu MC33926 Motor Driver

Install MC33926 Motor Driver library

A note about the Raspi Cam Module

Sometimes enabling the Raspberry Pi Camera module in raspi-config doesn't completely load the kernel drivers for it. If you don't see /dev/video0 on your system, or letsrobot.py complains about not finding it, then do the following:

  1. Enable the kernel module for your current session:
sudo modprobe bcm2835-v4l2
  1. Tell the operating system to load the kernel module at boot going forward:
sudo cat 'bcm2835-v4l2' >> /etc/modules

Now you should see video0 if you do ls /dev/ | grep video

High Level Overview

robot client topology

The robot client connects via websockets to the API service to retrieve configuration information, to the chat to receive chat messages, the video/audio relays to send its camera and microphone capture, and to the control service to receive user commands.

Interfaces:

Control server via socket.io Application server via socket.io and HTTP Chat server via socket.io Sends video stream via websockets Sends audio stream via websockets

Responsibilities:

Capturing Audio and Video Relays commands to robot hardware Text to Speech Supports remote login for diagnostics and updates Configuration updates from the web client (partially implemented)

Detailed Description:

The robot client connects to four external services: API Service, Chat Service, Video/Audio Service, and the Control Service.

API Service

Provides information about which host and port to connect to for the chat service, video/audio service, and control service

Chat Service

Relays chat messages sent from the web clients to the robot

Video/Audio Service

The robot client streams ffmpeg output to the video/audio service

Control Service

Relays control messages sent from the web clients to the robot

About

Let's Robot open source software for pairing your robot with our site.

Resources

License

Stars

Watchers

Forks

Releases

No releases published

Packages

No packages published