Skip to content

TLS ClientHello/ServerHello Dumper - extracts TLS versions and ciphers from network interfaces / PCAPs

Notifications You must be signed in to change notification settings

laplaceliu/tls-hello-dump

 
 

Folders and files

NameName
Last commit message
Last commit date

Latest commit

 

History

20 Commits
 
 
 
 
 
 
 
 
 
 
 
 

Repository files navigation

TLS Hello Dumper

This is a tool to count the TLS protocol versions and ciphers encountered by your server (or client). It is written (read: shamelessly copied) in C for maximum efficiency on a high-traffic servers.

This program is inspired by xnyhps' great series of posts about the state of TLS on XMPP. It is based on example code by the Tcpdump Group.

Restrictions

This tool so far only supports IPv4, has a hacked-together TCP packet parser and its configuration options are severely limited.

If you feed it bad packets, it will die a horrible death, open a reverse shell or eat your babies.

Currently, the tool is creating two log entries for each new SSL/TLS connection. This will bias your statistics towards clients with bad connectivity, and against long-living connections. This is not a replacement for dumping the SSL/TLS ciphers from all open connections to your server.

If you specify a network device, it will enter PROMISC mode. Use only if you are authorized to sniff the network.

Compilation

You need to have the PCAP dev package; e.g. on Debian/Ubuntu:

apt install libpcap0.8-dev

To compile, simply run make. Have a look at the Makefile to tune the output parameters (#defines). Possible compile-time options:

  • LOG_COUNTER display a linear packet counter
  • LOG_ADDRESSES display IPs
  • LOG_PORTS display TCP ports
  • LOG_SESSIONID show if packets contain a session ID (it is not actually dumped)

Usage

You can run the tool on a PCAP dump file or directly on a network interface (which requires root permissions/CAP_NET_ADMIN or similar):

./tls-hello-dump ./stored-log.pcap
./tls-hello-dump eth0

You can add a filter to select which protocol to use:

./tls-hello-dump eth0 xmpp	# Filter XMPP C2S (5222, 5223) and S2S (5269)
./tls-hello-dump eth0 https	# Filter HTTPS (443)
./tls-hello-dump eth0 995	# Filter POP3S (995)

# The following is a manually crafted POP3/POP3S filter
./tls-hello-dump eth0 '(tcp port 110 or tcp port 995)
	and tcp[tcp[12]/16*4]=22 and (tcp[tcp[12]/16*4+5]=1 or tcp[tcp[12]/16*4+5]=2)'

(The cryptic filter part starting with and is needed to filter out TLS Hello packets. Never forget to add it!)

Parsing the output

This is an example of the program output:

tls-hello-dumper - TLS ClientHello/ServerHello Dumper
Copyright (c) 2013 Georg Lukas, based on Tcpdump code.
THERE IS ABSOLUTELY NO WARRANTY FOR THIS PROGRAM.

Device: wlan0
Filter expression: tcp port 443 and tcp[32]=22 and (tcp[37]=1 or tcp[37]=2)

Source          Destination     Packet content
192.168.23.42   83.223.75.24    TLSv1 ClientHello TLSv1.2 :C030:C02C:C028:C024:C014:C00A:C022:C021:00A3:009F:006B:006A:0039:0038:0088:0087:C032:C02E:C02A:C026:C00F:C005:009D:003D:0035:0084:C012:C008:C01C:C01B:0016:0013:C00D:C003:000A:C02F:C02B:C027:C023:C013:C009:C01F:C01E:00A2:009E:0067:0040:0033:0032:009A:0099:0045:0044:C031:C02D:C029:C025:C00E:C004:009C:003C:002F:0096:0041:C011:C007:C00C:C002:0005:0004:0015:0012:0009:0014:0011:0008:0006:0003:00FF:
83.223.75.24    192.168.23.42   TLSv1 ServerHello TLSv1 cipher 0039

Depending on your compile-time options, you might see more or less columns. The most interesting one is the last one, "Packet content". It starts with the SSL/TLS protocol version of the packet, followed by either ClientHello or ServerHello. Then comes the maximum SSL/TLS version supported by the sender.

A ClientHello contains the list of supported ciphers, in hexadecimal format.

A ServerHello contains the chosen cipher suite, in hex. This is what matters for the connection.

Because hex is not very readable, you can convert the codes into their Wireshark-equivalent names, by filtering the output with the following sed command:

./tls-hello-dump eth0 | sed -f ./readable.sed
...
83.223.75.24    192.168.23.42   TLSv1 ServerHello TLSv1 cipher TLS_DHE_RSA_WITH_AES_256_CBC_SHA
...

Beware: The script will convert any uppercase two-byte hex numbers it encounters into their equivalent cipher names.

Obtaining Stats

The distribution comes with a helper script written in GAWK that counts the used protocols and ciphers and outputs friendly stats:

./tls-hello-dump stored-log.pcap | ./count-negotiated.awk
Protocols:
18	TLSv1.2
4	TLSv1

Ciphers:
20	TLS_ECDHE_RSA_WITH_AES_256_CBC_SHA
1	TLS_RSA_WITH_AES_256_CBC_SHA256
1	TLS_ECDHE_RSA_WITH_AES_256_CBC_SHA384

Protocols+Ciphers:
16	TLSv1.2	TLS_ECDHE_RSA_WITH_AES_256_CBC_SHA
4	TLSv1	TLS_ECDHE_RSA_WITH_AES_256_CBC_SHA
1	TLSv1.2	TLS_RSA_WITH_AES_256_CBC_SHA256
1	TLSv1.2	TLS_ECDHE_RSA_WITH_AES_256_CBC_SHA384

Please consider that if you generate statistics from tls-hello-dump, these are skewed towards clients making more connections. You can reduce the effect by only counting each individual IP+protocol+cipher combination once:

./tls-hello-dump stored-log.pcap | sort | uniq | ./count-negotiated.awk
Protocols:
6	TLSv1.2
4	TLSv1

Ciphers:
8	TLS_ECDHE_RSA_WITH_AES_256_CBC_SHA
1	TLS_RSA_WITH_AES_256_CBC_SHA256
1	TLS_ECDHE_RSA_WITH_AES_256_CBC_SHA384

Protocols+Ciphers:
4	TLSv1	TLS_ECDHE_RSA_WITH_AES_256_CBC_SHA
4	TLSv1.2	TLS_ECDHE_RSA_WITH_AES_256_CBC_SHA
1	TLSv1.2	TLS_RSA_WITH_AES_256_CBC_SHA256
1	TLSv1.2	TLS_ECDHE_RSA_WITH_AES_256_CBC_SHA384

License

This software is a modification of:

sniffex.c

Sniffer example of TCP/IP packet capture using libpcap.

Version 0.1.1 (2005-07-05) Copyright (c) 2005 The Tcpdump Group

This software is intended to be used as a practical example and demonstration of the libpcap library; available at: http://www.tcpdump.org/


This software is a modification of Tim Carstens' "sniffer.c" demonstration source code, released as follows:

sniffer.c Copyright (c) 2002 Tim Carstens 2002-01-07 Demonstration of using libpcap timcarst -at- yahoo -dot- com

"sniffer.c" is distributed under these terms:

Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met:

  1. Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer.
  2. Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution.
  3. The name "Tim Carstens" may not be used to endorse or promote products derived from this software without prior written permission

THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. <end of "sniffer.c" terms>

This software, "sniffex.c", is a derivative work of "sniffer.c" and is covered by the following terms:

Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met:

  1. Because this is a derivative work, you must comply with the "sniffer.c" terms reproduced above.
  2. Redistributions of source code must retain the Tcpdump Group copyright notice at the top of this source file, this list of conditions and the following disclaimer.
  3. Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution.
  4. The names "tcpdump" or "libpcap" may not be used to endorse or promote products derived from this software without prior written permission.

THERE IS ABSOLUTELY NO WARRANTY FOR THIS PROGRAM. BECAUSE THE PROGRAM IS LICENSED FREE OF CHARGE, THERE IS NO WARRANTY FOR THE PROGRAM, TO THE EXTENT PERMITTED BY APPLICABLE LAW. EXCEPT WHEN OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR OTHER PARTIES PROVIDE THE PROGRAM "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. THE ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF THE PROGRAM IS WITH YOU. SHOULD THE PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF ALL NECESSARY SERVICING, REPAIR OR CORRECTION.

IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MAY MODIFY AND/OR REDISTRIBUTE THE PROGRAM AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES, INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OR INABILITY TO USE THE PROGRAM (INCLUDING BUT NOT LIMITED TO LOSS OF DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY YOU OR THIRD PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER PROGRAMS), EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. <end of "sniffex.c" terms>


About

TLS ClientHello/ServerHello Dumper - extracts TLS versions and ciphers from network interfaces / PCAPs

Resources

Stars

Watchers

Forks

Releases

No releases published

Packages

No packages published

Languages

  • C 68.4%
  • sed 29.8%
  • Awk 1.1%
  • Makefile 0.7%