Skip to content

kubevirt/csi-driver

Folders and files

NameName
Last commit message
Last commit date

Latest commit

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

Repository files navigation

CSI KubeVirt Driver

This repository hosts the CSI KubeVirt driver and all of its build and dependent configuration files to deploy the driver.

This CSI driver is made for a tenant cluster deployed on top of kubevirt VMs, and enables it to get its persistent data
from the underlying, infrastructure cluster. To avoid confusion, this CSI driver is deployed on the tenant cluster, and does not require kubevirt installation at all.

The term "tenant cluster" refers to the k8s cluster installed on kubevirt VMs, and "infrastructure cluster"
(or shorter "infra cluster") refers to a cluster with kubevirt installed and can be installaed on any infrastrucure (baremetal, public cloud, etc).

Pre-requisite

  • Kubernetes cluster
  • Running version 1.24 or later
  • Access to terminal with kubectl installed

Deployment

For this example it is assumed that the namespace in which the tenant VMs are deployed is called kvcluster.

For split deployment

# Deploy infra service account
kubectl -n kvcluster apply -f ./deploy/infra-cluster-service-account.yaml
# Deploy the tenant resources not including the controller with the overlay in deploy/tenant/overlay
kubectl_tenant apply --kubeconfig $TENANT_KUBECONFIG --kustomize ./deploy/tenant/overlay
# Deploy the controller resources in the infra cluster with the overlay in deploy/controller-infra/overlay
kubectl apply --kustomize ./deploy/controller-infra/overlay

For tenant controller deployment

# Deploy the infra kubeconfig secret in the tenant cluster, this depends on the infra cluster.
kubectl -n kubevirt-csi-driver --kubeconfig $TENANT_KUBECONFIG apply -f <yaml of secret>
# Deploy infra service account
kubectl -n kvcluster apply -f ./deploy/infra-cluster-service-account.yaml
# Deploy the tenant resources not including the controller with the overlay in deploy/tenant/overlay
kubectl_tenant apply --kubeconfig $TENANT_KUBECONFIG --kustomize ./deploy/tenant/overlay
# Deploy the controller resources in the tenant cluster with the overlay in deploy/controller-tenant/overlay
kubectl apply --kubeconfig $TENANT_KUBECONFIG --kustomize ./deploy/controller-tenant/overlay

Split deployment

A split deployment is where the controller is deployed in the namespace of the tenant cluster inside of the infra cluster. This means the controller lives in the same namespace as the tenant cluster Virtual Machines. The daemonset is still deployed in the tenant cluster. This allows to not give the tenat cluster access to the infra cluster in order to manage DataVolumes in the infra cluster.

./deploy/controller-infra/overlay/kustomize.yaml looks like this:

bases:
- ../base
namespace: kvcluster
patchesStrategicMerge:
- controller.yaml
resources:
- infra-namespace-configmap.yaml

Note the namespace is the namespace of the tenant cluster in the infra cluster.

apiVersion: v1
kind: ConfigMap
metadata:
  name: driver-config
  namespace: kubevirt-csi-driver
data:
  infraClusterNamespace: kvcluster
  infraClusterLabels: csi-driver/cluster=tenant

For more information about the fields available in the driver-config ConfigMap see this documentation

kind: Deployment
apiVersion: apps/v1
metadata:
  name: kubevirt-csi-controller
  namespace: kubevirt-csi-driver
  labels:
    app: kubevirt-csi-driver
spec:
  template:
    spec:
      containers:
        - name: csi-driver
          image: <registry visible in tenant>/kubevirt-csi-driver:latest

Full tenant deployment

A Tenant deployment is where both controller and daemonset are deployed in the tenant cluster. This means the controller in the tenant cluster needs access to the infra cluster in order to manage DataVolumes in the infra cluster. In addition to applying the controller the common tenant resources also have to be applied.

./deploy/controller-tenant/overlay/kustomize.yaml looks like this:

bases:
- ../base
namespace: kubevirt-csi-driver
patchesStrategicMerge:
- controller.yaml

The namespace in the tenant cluster is kubevirt-csi-driver and we are merging the controller.yaml into the main deployment yaml. The base deployment references a secret called kvcluster-kubeconfig which should contain the kubeconfig that allows the controller to manage DataVolumes in the infra cluster. It is expected this secret is created with the overlay, and specified in the kustomize.yaml

Deployment supports kustomize when deploying the controller and you can use an overlay like this ./deploy/controller-tenant/overlay/controller.yaml

kind: Deployment
apiVersion: apps/v1
metadata:
  name: kubevirt-csi-controller
  namespace: kubevirt-csi-driver
  labels:
    app: kubevirt-csi-driver
spec:
  template:
    spec:
      containers:
        - name: csi-driver
          image: <registry visible in tenant>/kubevirt-csi-driver:latest

Replace the registry and image to the one used.

Common tenant resources

Both tenant deployment and split deployments require resources that are common to be deployed in the tenant cluster. The overlay references the base in ./deploy/tenant/base like this:

bases:
- ../base
namespace: kubevirt-csi-driver
patchesStrategicMerge:
- infra-namespace-configmap.yaml
- node.yaml
- storageclass.yaml

The namespace has to match the namespace in the controller-tenant deployment if you use that method of deploying.

apiVersion: v1
kind: ConfigMap
metadata:
  name: driver-config
  namespace: kubevirt-csi-driver
data:
  infraClusterNamespace: kvcluster #namespace in infra cluster that holds the tenant cluster VMs
  infraClusterLabels: csi-driver/cluster=tenant

Change the infraClusterNamespace to be what is in use in your cluster.

kind: DaemonSet
apiVersion: apps/v1
metadata:
  name: kubevirt-csi-node
  namespace: kubevirt-csi-driver
spec:
  template:
    spec:
      containers:
        - name: csi-driver
          image: <registry visible in tenant>/kubevirt-csi-driver:latest

Replace the registry and image to the one used.

apiVersion: storage.k8s.io/v1
kind: StorageClass
metadata:
  name: kubevirt
  annotations:
    storageclass.kubernetes.io/is-default-class: "true"
provisioner: csi.kubevirt.io
parameters:
  infraStorageClassName: local
  bus: scsi

Set infraStorageClassName to the storage class in the infra cluster that will are used to create the DataVolumes in.

Configuring KubeVirt

Enable HotplugVolumes feature gate:

  • In case your Kubevirt namespace has the ConfigMap 'kubevirt-config' then use deploy/example/kubevirt-config.yaml for adding the feature gate to it. Look at the path {.data.feature-gates}
  • Otherwise, add the feature gate to the resource of type Kubevirt. There should be a single resource of this type and its name is irrelevant. See deploy/example/kubevirt.yaml
  • Pay attention that in some deployments there are operators that will restore previous configuration. You will have to stop these operators for editing the resources.Some operators allow configuration through their own CRD. HCO is such an operator. See HCO cluster configuration to understand how HCO feature gates are configured.

Building the binaries

If you want to build the driver yourself, you can do so with the following command from the root directory:

make build

Run functional tests

Running the functional tests will use an existing cluster (looks for KUBECONFIG) to deploy a tenant k8s cluster and will deploy the CSI driver on it, and a test pod that consumes a dynamically provisioned volume.

make test-functional IMG=quay.io/kubevirt/csi-driver:latest

You can choose to run the tests on a specific namespace. That namespace will not be terminated in the end of the run.

KUBEVIRT_CSI_DRIVER_FUNC_TEST_NAMESPACE=my-namespace make test-functional

Submitting patches

When sending patches to the project, the submitter is required to certify that they have the legal right to submit the code. This is achieved by adding a line

Signed-off-by: Real Name <[email protected]>

to the bottom of every commit message. Existence of such a line certifies that the submitter has complied with the Developer's Certificate of Origin 1.1, (as defined in the file docs/developer-certificate-of-origin).

This line can be automatically added to a commit in the correct format, by using the '-s' option to 'git commit'.

Community

If you got enough of code and want to speak to people, then you got a couple of options:

Code of conduct

Code of conduct

License

KubeVirt CSI Driver is distributed under the Apache License, Version 2.0.

Copyright 2016

Licensed under the Apache License, Version 2.0 (the "License");
you may not use this file except in compliance with the License.
You may obtain a copy of the License at

    http://www.apache.org/licenses/LICENSE-2.0

Unless required by applicable law or agreed to in writing, software
distributed under the License is distributed on an "AS IS" BASIS,
WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
See the License for the specific language governing permissions and
limitations under the License.