This software is experimental and a work in progress. Under no circumstances should these files be used in relation to any critical system(s). Use of these files is at your own risk.
THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
This is a driverless (no USB drivers needed, even on Windows) USB HID bootloader for STM32F10x and STM32F4xx devices.
It doesn't use ST libraries since they are bloated and buggy. Only CMSIS and some required system files and macros have been used from ST provided SDK.
This allowed for a very small bootloader 4 KB 2 KB on STM32F10x devices. On STM32F4xx devices there is no point to make the bootloader much smaller than 16 KB because the first flash page is already 16 KB.
This repo is based on bootsector's stm32-hid-bootloader repository but is customized to follows the STM32duino ecosystem requirements. The source files (Bootloader and CLI) can be compiled on Windows, Linux or Mac
cli folder contains the source code for creating the command line tool hid-flash tool.
This bootloader should't have any compiler restrictions, so it should work with
any GCC ARM toolchain version (latest is always recommended!). Just run 'make' on that folder.
D:\STM32_HID_bootloader\cli>make clean Clears the previous generated files
D:\STM32_HID_bootloader\cli>make Creates the hid-flash.exe file
bootloader folder contains the source code for creating the hid_bootloader.bin file that is burned into the STM32F103 flash memory. Currently, only STM32F103 MCU is supported. Making the hid_bootloader.bin
STM32F10x
D:\STM32_HID_bootloader\bootloader_F1\bootloader>make clean Clears the previous generated files
D:\STM32_HID_bootloader\bootloader_F1\bootloader>make Creates the hid_bootloader.bin file
STM32F4xx
D:\STM32_HID_bootloader\bootloader_F4\bootloader>make clean Clears the previous generated files
D:\STM32_HID_bootloader\bootloader_F4\bootloader>make Creates the hid_bootloader.bin file
The binary file can be found in:
D:\STM32_HID_bootloader\bootloader_F4\bootloader\build\HID_Bootloader_F4.bin
