Version the First

Overview

This release contains binary files for my ITS1A Clock. They won't work for anything else. There are two files:

• ITS1A.bin - this is the executable code
• spiffs.bin - this is the web GUI

Installation (Abbreviated version)

OK, so this isn't the first time you've done this. These are the commands you need to remember:

1. esptool -cd ck -cb 115200 -cp <port name> -ca 0 -cf ITS1A.bin
2. esptool -cd ck -cb 115200 -cp <port name> -ca 0xBB000 -cf spiffs.bin

Installation (Full Version)

This is the step-by-step guide:

1. You will need a programming tool for the ESP-01. If you socketed the ESP-01 you can remove it from the clock (turn it off first!) and insert it into the programmer. Or you can use the header on the clock itself.
2. Download esptool-ck for your platform and unzip/untar/whatever it somewhere. You will use this to upload the bin files to the clock.
3. Download these bin files and put the in the same folder (for convenience).
4. Plug the programmer into you computer's USB port and the other end into the clock or ESP-01.
5. Figure out what the serial port is called - you will need to know this to upload the files. On windows you can a command shell and type mode to find out.
6. In the shell you just opened, change directory to where esptool is.
7. Upload the binary file with this command - change the -cp value to whatever your serial port is called - here it is called COM10.
   esptool -cd ck -cb 115200 -cp COM10 -ca 0 -cf ITS1A.bin
   You should see some text saying it is uploading, and a bunch of dots.
8. Upload the spiffs, again replace COM10 with whatever your serial port is called:
   esptool -cd ck -cb 115200 -cp COM10 -ca 0xBB000 -cf spiffs.bin