Skip to content

jordanschnell/aerosol-workshop-driver

 
 

Repository files navigation

Welcome to the GIANT hackathon!

Over the next week, you'll be implementing a very simple "model" that computes aerosol optical properties from state information. This model will be run by a driver program that initializes it, computes the optical properties, interpolates those properties to its own wavelength grid, and outputs results that can be plotted.

Sounds simple, right? So what's the big deal?

In this hackathon, we're trying to demonstrate how an atmospheric "host model" written in one programming language (Fortran, C, or C++) can communicate with an "aerosol model" written in another language (Fortran, C, or C++). If we succeed, then existing and future aerosol models can be made accessible to atmosphere models, as long as both are written in one of the supported languages.

In other words, the first step in this hackathon is about host-aerosol model language interoperability. It's not very "sciency", but it's something we need to do before we do anything more complicated. Once your aerosol package is connected, you can move on to the more science-based challenges of adapting the interface to accomodate the varying needs of host models and aerosol packages related to radiation. We will be available throughout the week to help with the technical implementation of your ideas for how best to accomplish this.

We appreciate your willingness to work with us to address this fundamental iѕsue before we move on to the more interest questions in aerosol science. Thanks for participating!

What do I need?

In principle, this interface allows an existing aerosol model to be "plugged in" to the interface to provide the aerosol optical properties we talked about in the introductory presentation. However, you don't have to bring in the entire model—you only really need the logic that computes aerosol optical properties, and the things that it requires.

Aside from that, you need Git to access the driver code.

One easy way to set things up is to use Docker Desktop to build and run the driver inside a containerized Linux environment with all the right tools. We explain how you can do this below.

If you would prefer to build locally without using Docker, you will need a development environment (with CMake, Make, and compilers for Fortran, C, and C++) for building and running the driver with your aerosol model.

In any case, if you have any difficulties installing git and Docker Desktop, we'll have a Slack channel and a breakout room set up during the event where we can help you either get these installed, or get you set up to develop in another way.

How do I provide or implement my own aerosol model?

Follow these steps to put together your model.

  1. Clone this repository locally.

    git clone https://github.com/NCAR/aerosol-workshop-driver
    cd aerosol-workshop-driver/
    
  2. Select a programming language for your model's implementation, and copy the provided model template code into place within the my_model/ folder:

    cp my_model/template/{language}/* my_model/
    

    where {language} is one of fortran (Fortran) , c (C), or cpp (C++).

  3. Customize your model, renaming and modifying the files in the my_model directory as needed. If you are adapting an existing model to this interface, copy the source files you need into the my_model directory.

    • Rename/edit the my_model/my_model.* files to connect your aerosol model to the interface.
    • Edit my_model/CMakeLists.txt according to your naming scheme following the instructions in that file. Add any source files that you've imported from elsewhere to the list of source files in the create_aerosol_model command.
    • The remaining files in my_model/ should be left unchanged.
  4. To build your model and run the driver tests, type

    MacOS or Linux

    docker build -t aerosol-test .
    docker run -it --mount src="$(pwd)/output",target=/output,type=bind aerosol-test
    cd build/
    make test
    

    Windows (UNTESTED)

    docker build -t aerosol-test .
    docker run -it --mount src="c/Users/me/path/to/aerosol-workshop-driver/output",target=/output,type=bind aerosol-test
    cd build/
    make test
    
  5. To run the three "host models" with your aerosol package (still in the build/ folder) type

    ./c_driver "my model name" "input-file-if-needed.txt"
    ./cpp_driver "my model name" "input-file-if-needed.txt"
    ./fortran_driver "my model name" "input-file-if-needed.txt"
    

    Any aerosol package should run and produce the same results in each of the "host models."

  6. Any files you put in the container's /output/ directory are made available in aerosol-workshop-driver/output/ outside the container.

  7. To exit the container type exit.

Help!!!

This hackathon is an experiment, so everyone is bound to be confused at some point. Make sure to join our GIANT Slack workspace, where the organizers and other participants can help you with the issues you encounter and answer questions about concepts, terminology, and the tools.

About

Driver for use in an aerosol interface hack-a-thon

Resources

License

Stars

Watchers

Forks

Releases

No releases published

Packages

No packages published

Languages

  • Fortran 40.2%
  • C 28.1%
  • C++ 23.6%
  • CMake 7.9%
  • Dockerfile 0.2%