Homebridge Denon TV

Homebridge plugin for Denon/Marantz AV Receivers series X/SR. Tested Denon AVR-2112CI, AVR-3311CI, AVR-X6300H, AVR-X2700H, AVC-X4800H, Marantz SR8012, SR6013, M-CR611, PM7000N.

Package Requirements

Package	Installation	Role	Required
Homebridge	Homebridge Wiki	HomeKit Bridge	Required
Config UI X	Config UI X Wiki	Homebridge Web User Interface	Recommended
Denon TV	Plug-In Wiki	Homebridge Plug-In	Required

About The Plugin

• Multi Zone control.
• Power ON/OFF short press tile in HomeKit app.
• RC/Media control is possible after you go to the RC app on iPhone/iPad.
• Speaker control is possible after you go to RC app on iPhone/iPad Speaker Service.
• Legacy Volume and Mute control is possible throught extra lightbulb/fan (slider).
• Inputs/Surrounds can be changed using Inputs selector in the Home app or using extra tile.
• Digital Input Modes can be controlled by creating separate tile in the buttons section.
• Siri can be used for all functions, some times need create legacy buttons/switches/sensors.
• Automations can be used for all functions, some times need create legacy buttons/switches/sensors.
• This plugin is based upon the official documentation: Denon Control Protocol 2020
• Support external integrations, RESTFul, MQTT.

Configuration

• First enable Network Contorl Denon/Marantz.
• Run this plugin as a Child Bridge (Highly Recommended), this prevent crash Homebridge if plugin crashes.
• Install and use Homebridge Config UI X to configure this plugin.
• The sample-config.json can be edited and used as an alternative.

Key	Description
name	Here set the accessory Name to be displayed in Homebridge/HomeKit.
host	Here set the Hostname or Address IP of AVR.
port	Here set the API communication port, if 8080 is not working try to use port 80 which some receivers use alternatively.
zoneControl	Here choose which zone will be controlled by this section 0 - Main Zone, 1 - Zone 2, 2 - Zone 3, 3 - Surround Mode.
generation	Here choose generation of Your device, old 0 - 2010 - 2012, middle 1 - 2013 - 2022, new 2 - 2023 and newer.
getInputsFromDevice	If enabled, Inputs will be loaded direct from device.
getFavoritesFromDevice	If enabled, Favorites will be loaded to the inputs list if exist.
getQuickSmartSelectFromDevice	If enabled, Quick/Smart Select will be loaded to the inputs list if exist.
inputsDisplayOrder	Here choose display order of the inputs list, 0 - None, 1 - Ascending by Name, 2 - Descending by Name, 3 - Ascending by Reference, 4 - Ascending by Reference.
inputs	Here create Inputs which You want expose to the Homebridge/HomeKit.
inputs.name	Here set Input Name.
inputs.reference	Choose from available inputs, the inputs that should be published to and appear in HomeKit app in the device tile as inputs list.
surrounds	Here create Surrounds which You want expose to the Homebridge/HomeKit.
surrounds.name	Here set Surround Mode Name.
surrounds.reference	Here choose Surround Mode, the mode that should be published to and appear in HomeKit app in the extra tile as Surrounds List.
buttons	Here create Buttons which You want expose to the Homebridge/HomeKit for Main Zone.
buttons.name	Here set Button Name.
buttons.reference	Here choose Function for this button.
buttons.displayType	Here choose characteristic type to be exposed in HomeKit app, possible 0 - None/Disabled, 1 - Outlet, 2 - Switch.
buttons.namePrefix	Here enable/disable the accessory name as a prefix for button name.
buttonsZ2	Here create Buttons which You want expose to the Homebridge/HomeKit for Zone 2.
buttonsZ2.name	Here set Button Name.
buttonsZ2.reference	Here choose function for this button.
buttonsZ2.displayType	Here choose characteristic type to be exposed in HomeKit app, possible 0 - None/Disabled, 1 - Outlet, 2 - Switch.
buttonsZ2.namePrefix	Here enable/disable the accessory name as a prefix for button name.
buttonsZ3	Here create Buttons which You want expose to the Homebridge/HomeKit for Zone 3.
buttonsZ3.name	Here set Button Name.
buttonsZ3.reference	Here choose function for this button.
buttonsZ3.displayType	Here choose characteristic type to be exposed in HomeKit app, possible 0 - None/Disabled, 1 - Outlet, 2 - Switch.
buttonsZ3.namePrefix	Here enable/disable the accessory name as a prefix for button name.
sensorPower	If enabled, then the Power will be exposed as a Contact Sensor, fired if power ON.
sensorVolume	If enabled, then the Volume will be exposed as a Contact Sensor, fired on every Volume change.
sensorMute	If enabled, then the Mute will be exposed as a Contact Sensor, fired if Mmute ON.
sensorInput	If enabled, then the Input will be exposed as a Contact Sensor, fired on every Input change.
sensorInputs	Here create custom Inputs Sensor which You want expose to the Homebridge/HomeKit.
sensorInputs.name	Here set own Sensor Name.
sensorInputs.reference	Here choose Input Reference, sensor fired if switch to this reference.
sensorInputs.displayType	Here choose characteristic type to be exposed in HomeKit app, 0 - None/Disabled, 1 - Motion Sensor, 2 - Occupancy Sensor, 3 - Contact Sensor.
sensorInputs.namePrefix	Here enable/disable the accessory name as a prefix for sensor name.
sensorSurrounds	Here create custom Surrounds Sensor which You want expose to the Homebridge/HomeKit.
sensorSurrounds.name	Here set own Sensor Name.
sensorSurrounds.reference	Here choose Sensor Reference, sensor fired if switch to this reference.
sensorSurrounds.displayType	Here choose characteristic type to be exposed in HomeKit app, 0 - None/Disabled, 1 - Motion Sensor, 2 - Occupancy Sensor, 3 - Contact Sensor.
sensorSurrounds.namePrefix	Here enable/disable the accessory name as a prefix for sensor name.
enableDebugMode	If enabled, deep log will be present in homebridge console.
disableLogInfo	If enabled, disable log info, all values and state will not be displayed in Homebridge log console.
disableLogDeviceInfo	If enabled, add ability to disable log device info by every connections device to the network.
disableLogConnectError	If enabled, disable logging device connect error.
masterPower	If enabled, then the Power switch for that zone will turn the entire receiver ON or OFF/STANDBY rather than just the zone itself.
masterVolume	If enabled, then the Volume for that zone will set the entire receiver UP or DOWN rather than just the zone itself, (only for the Zone 1 and 2).
masterMute	If enabled, then the Mute switch for that zone will muted the entire receiver ON or OFF rather than just the zone itself, (only for the Zone 1 and 2).
volumeControl	Here choose what a additional volume control mode You want to use, 0 - None/Disabled, 1 - Lightbulb, 2 - Fan.
volumeMax	Here set the maximum possible volume to set, 0 - 100.
infoButtonCommand	Here choose the function for I button in RC app.
refreshInterval	Here set the data refresh interval.
enableRestFul	If enabled, RESTful server will start automatically and respond to any path request.
restFulPort	Here set the listening Port for RESTful server, every zone need own port.
restFulDebug	If enabled, deep log will be present in homebridge console for RESTFul server.
enableMqtt	If enabled, MQTT Broker will start automatically and publish all awailable PV installation data.
mqttHost	Here set the IP Address or Hostname for MQTT Broker.
mqttPort	Here set the Port for MQTT Broker, default 1883.
mqttClientId	Here optional set the Client Id of MQTT Broker.
mqttPrefix	Here set the Prefix for Topic or leave empty.
mqttAuth	If enabled, MQTT Broker will use authorization credentials.
mqttUser	Here set the MQTT Broker user.
mqttPasswd	Here set the MQTT Broker password.
mqttDebug	If enabled, deep log will be present in homebridge console for MQTT.
AV Surround Mode	This extra Accessory will control all functions of Main Zone except Inputs and Buttons.

RESTFul Integration

• Request: http//homebridge_ip_address:port/path.
• Path: info, state, picture, surround.
• Respone as JSON object.

MQTT Integration

Direction	Topic	Message	Payload Data
Publish	Info, State, Picture, Surround	{"Power": {"value": OFF}}	JSON object.
Subscribe	Set	{"Power": true}	JSON object.

Subscribe	Key	Value	Type	Description
Denon/Marantz
	Power	true, false	boolean	Power state.
	Input	SAT/CBL	string	Set input.
	Surround	MUSIC	string	Set surround mode.
	RcControl	NS9E	string	Send RC command.
	Volume	100	integer	Set volume.
	Mute	true, false	boolean	Set mute.