X1Plus

Installation instructions

Welcome to X1Plus! If you're a user, you probably want to go straight to the wiki, which tells you everything you need to know about installing and using X1Plus on your printer.

The rest of this file has boring stuff for really big nerds who want to develop X1Plus.

Development instructions

Ok, don't say I didn't warn you. Anyway, hi! Glad you're interested in contributing to X1Plus! Here is a bunch of information on how to build it, how it's structured internally, and various things you might need to know about how to make changes and how to contribute back. X1Plus is the result of a year or so of vaguely-structured work; it started life as a fairly frumious hack, and over the past few months, we've been working hard to try to clean it up for release to the outside world. All that said, there are parts that you will find are still a mess, and for that, we're truly sorry! We hope you'll come play around with it anyway. There's a lot of fun stuff to be done, and we have only barely scratched the surface so far.

How do I get started?

Probably the easiest way to get started building X1Plus is in a Docker container. If you're adventurous, you can probably build X1Plus on any old Linux machine (I do), but if you do that and it breaks, we really don't want to hear about it, so you really should just build it in Docker. You'll need the filesystem decryption key from a live printer (running either X1Plus or the Official Rootable Firmware) in order to build X1Plus.

Note that if you're on Windows you'd need to install Windows Subsystem for Linux:

wsl --install
wsl -d Ubuntu

First, copy the getkey bin over to the printer:

scp scripts/getkey root@<printer’s IP>:/tmp

Now retrieve the key:

ssh root@<printer’s IP> /tmp/getkey >> localconfig.mk

Clone down the X1Plus repo and build the Docker image from the Dockerfile in scripts/docker:

$ git clone ...
$ cd X1Plus
$ docker build -t x1plusbuild scripts/docker/

In order to make on the Docker container a safe directory must be added to the git config. As that will only persist for one run the Docker container must be run in interactive mode.

$ docker run -dit -v `pwd`:/work --name x1plusmake x1plusbuild 

Now, exec into the Docker container and run the make commands.

$ docker exec -v `pwd`:/work x1plusmake bash -c 'git config --global --add safe.directory /work'
$ docker exec -v `pwd`:/work x1plusmake make scripts
$ docker exec -v `pwd`:/work x1plusbuild make

With some luck, you should get a .x1p file in your working directory! Get the name of that file:

$ docker exec -v `pwd`:/work x1plusmake sh -c 'ls /work | grep .x1p'
$ <somefilename>.x1p

Copy that out of the Docker container.

$ docker cp x1plusmake:/work/<somefilename>.x1p

And scp it to the printer (never remove an SD card from a live X1Plus system, you goofball).

scp <somefilename>.x1p root@<printer’s IP>:/sdcard

Reboot your printer, and install X1Plus from the menu.

Finally, don't forget to stop your Docker container!

docker stop x1plusmake

If you're going to make changes to any of the UI files, you should really read the rest of this document... otherwise you might be in for a nasty surprise next time you git pull.

How does X1Plus work, from the printer's perspective?

The core concept of X1Plus is that we build an overlay on top of the Bambu Lab firmware, and replace only the parts that we need in order to launch X1Plus. We are very careful not to redistribute any of Bambu Lab's IP directly; when it's necessary to use or patch Bambu Lab binaries, we download them directly from Bambu Lab servers, and then patch them onboard the printer. We also try to be pretty careful to leave the printer in a "fail-safe" state by modifying as little of the on-printer flash as possible. Below is a rough flow of how X1Plus works, from installer through to normal boot.

Host-side installer. The host-side installer is an Electron app that wraps all the logic to check whether the printer is running a supported version of the base firmware, and that wraps the mechanics of logging into the printer over MQTT, over FTP, and over SSH. (In development versions of X1Plus that relied on exploits to install, the PC-side installer was somewhat more complicated!) Roughly, this is implemented in installer-clientside/install-gui/src/index.ts.

The installer copies an .x1p image to the SD card, as well as a small tarball containing the on-printer install GUI stub. It SSHes to the printer, unpacks the tarball into /userdata on the printer, and runs a first-stage installer launch script that it (hopefully) unpacked; then, it waits for MQTT messages that indicate the progress of the installation.

First-stage install scripts. The first-stage installer (implemented in installer-clientside/stage1/x1plus/launch.sh) first shuts down the printer's service checker (otherwise, the GUI would get restarted!), and then shuts down the GUI. It drops a marker for the host-side installer to indicate that it has started up, and then relaunches the printer's GUI engine with X1Plus's setup GUI injected into it to replace the normal printer GUI.

X1Plus setup GUI. The precise mechanism by which we inject code into the GUI is interesting, but it is somewhat getting ahead of ourselves to discuss it exactly at this moment :) I'll talk about that in a moment. For now, all you really need to know is that this is implemented in QML, with bbl_screen-patch/kexec_ui/printerui/qml/Screen.qml as the initial item (the C++ native components live in bbl_screen-patch/interpose.cpp). As you might suspect from the name, this GUI is also part of the X1Plus boot process, but the first-stage installer launches it in such a way that the GUI goes straight into the installer screen. The installer mechanism, the SelectX1pPage, looks for .x1p images on the SD card, and asks the user which x1p to install. (An x1p is just a zip file that has an info.json and a payload.tar.gz in it.) Once the user chooses an x1p file, InstallingPage unpacks the payload.tar.gz into /userdata, invokes the Python-based install backend, and begins listening for DDS messages with status updates. (DDS is an internal pubsub message bus.)

Python install backend. The mechanics of what the Python installer does is probably better served by reading the code for it, which is in installer/install.py. We drop a precompiled version of Python into /userdata, and to communicate with the DDS message bus, we use ctypes to talk to the DDS system libraries. Roughly, the Python installer:

• checks to make sure that the printer's device tree is known and compatible;
• backs up a few printer configuration objects to the SD card;
• downloads an original firmware from Bambu Lab;
• decrypts it and decompresses it, unpacks the ext2 filesystem image, and then repacks that filesystem as a squashfs on the SD card;
• creates an ext4 loopback file on the SD card;
• copies an overlay squashfs and a kernel to the SD card;
• writes a bootloader stub to the printer's internal filesystem;
• and reports success, and offers to reboot.

(You can read the details of each of those in the Python installer itself.) When installation is complete, the printer reboots into the slightly modified internal filesystem.

On boot: SD card check and GUI display. When the printer powers up, it boots first into the onboard eMMC installation, as normal. We inject a shell script into /etc/init.d/S75kexec, which subsequently launches /opt/kexec/check_kexec. (Both of these scripts live in internal-fs/ in this tree.) This script checks an "emergency override" (engaged by pressing and holding the POWER and ESTOP buttons while powering the printer up), and if those buttons are pressed, it quits as quickly as possible to return control to the internal printer firmware. Otherwise, it launches the same GUI as was used in the X1Plus Setup process above, and offers to either boot into SD card firmware or run advanced options. (Because it was launched from the actual boot process, the dialog/KexecDialog is presented, rather than the SelectX1pPage.) If the user chooses to boot from the SD card, the shell script /opt/kexec/boot runs and prepares to boot the printer into the new kernel.

kexec'ing into the new world. Things start getting weird here, and fast. The net result of this stage is that we are going to reboot the printer into a custom-compiled kernel. The process of doing so is rather unusual; because we can't convince the first-stage bootloader on the system to do our bidding (the kernel is signed from that perspective), we need to hot-reboot. We perform the following steps in order to do this.

• First, we hash the running kernel's device tree (or, at least, keys of it that we care about) to make sure that we have an appropriate device tree for the kernel that we are going to jump into. We have a somewhat modified device tree; since we want to patch in the printer's serial number and similar things, we compile it at runtime using a dtc that we have on the printer. (This also chooses the correct includes to make sure we light up the correct one of four possible LCD panels that the printer could come with.)
• We prepare a few other parameters for the new kernel, and its userspace, including what we currently think the printer's serial number is, and which filesystems we will want to mount when we come back up.
• Now we start getting a little bit creative. We want to use kexec, but the Bambu Lab kernel does not have kexec built in; worse, kexec is nominally only available as a compiled-in option, so we can't compile a module for it from kernel sources. Luckily for us, there have been a series of attempts to make this work -- originally, amonakov's kexec-module, and subsequently, fabianishere's kexec-mod-arm64! We build on this work in kexec-mod/, where we port this kernel module to ARM32. Much of the Rockchip SoC gets astonishingly angry if hot-rebooted; we very carefully reset large chunks of the SoC's state in kexec-mod/kernel/arch/arm/machine_kexec_drv.c. To get access to many of the symbols we need, even if they are not EXPORT_SYMBOL, we bootstrap with kallsyms_lookup_name (which we, uh, grab from /proc/kallsyms).
• We load a kernel from the SD card, load our compiled device tree, load an initramfs from the SD card, and then have kexec do its thing; away we go, sailing into the New World.

Setting up the overlays in the initramfs. Once the new kernel boots, the first userspace code that executes is an initramfs, with init being a shellscript that lives, oddly enough, in initramfs/init. We start off by painting a cute logo, and setting a larger font on screen. Then, roughly, we:

• Mount the SD card. It should be FAT32; with particularly slow SD cards, it might take a bit to enumerate.
• Mount each of the base layers. At compile and install time, we build a bunch of squashfses: a Bambu Lab base image, a custom firmware overlay, and a GUI patch overlay.
• Mount the persistent overlay storage layer, which is an ext4fs that lives in a file on the FAT32 partition.
• Create an overlay that stacks up each of these into a single root partition. Bind the overlay around as needed, and then...
• Transfer control to the "real" init process.

At the moment that init gets control, the filesystem looks like this:

/             # Combined root filesystem, including all layers.
/mnt/sdcard   # SD card mount moved to be a subtree of the new root.
/mnt/rootfs   # Access to the "real" root filesystem, so that kernel drivers can see it if needed.
/mnt/overlay  # tmpfs containing individual overlay layers, including:
/mnt/overlay/00.00.28.55.squashfs    # Repacked Bambu base filesystem
/mnt/overlay/1.0.squashfs            # Precompiled X1Plus filesystem
/mnt/overlay/bbl_screen-1.0.squashfs # Patched bbl_screen image

Booting the OS. OS boot is mostly unremarkable, but we do override some components of the base system. See images/cfw/etc/init.d/ for bits and pieces that we override.

Launching the patched GUI. Here is the other sort of "interesting and creative" bit of X1Plus: how we patch the GUI. Our general goal is that we wish to redistribute as little of Bambu Lab's IP as possible, and instead, only redistribute our own modifications to it. The mechanics of this is all handled by bbl_screen-patch/, which ultimately spits out a printer_ui.so that gets LD_PRELOADed into bbl_screen. Here is the rough process from start to finish of how that happens; most of it happens at build time:

• We start by extracting all of the Qt resources from the original bbl_screen. We do this by statically looking up all of the callsites of qInitResources, and then using the Unicorn Engine to emulate the instructions leading up to them. Once we know the arguments to each call of qInitResources, we know the in-memory locations of each resource bundle, and we traverse the Qt resource bundle hierarchy to extract each bundle to its constituent files, and a root.qrc that can be later used to recompile a resource bundle. This all happens in extract_qrc.py.
• Once we have unpacked the resource bundle to the printer_ui-orig directory, we copy it to a new directory, and apply all of the patches in the patches/ folder, using patcher.py. This creates a printer_ui/ with our new GUI bundle.
• We then compile a resource bundle with rcc. We also compile an interposer that will intercept the appropriate call to qInitResources and replace it with our resource bundle, as well as adding a handful of other helpful C++ classes; this lives in interpose.cpp, which is at least lightly commented. All of these get linked together into a printer_ui.so.
• Because the printer_ui.so has a meaningful amount of original Bambu Lab IP in it, we do not want to redistribute this directly; instead, we distribute an xdelta-encoded patch from the original bbl_screen, which we reassemble into a printer_ui.so at install time.

At last, you have a beautiful X1Plus splash screen!

How does the X1Plus build system work?

This probably could use a fair bit more discussion, but in short, you should be able to just make. I would describe it better, but it is really quite embarrassing. The Electron installer app really is not integrated into the build system yet, and if you intend to hack on that, you should probably ask about it if you cannot decipher it already.

One thing to think about is that, by default, bbl_screen-patch/Makefile will overwrite the printer_ui directory if it believes that the patches directory has changed. This is great if you are just building from git, but if you are actually trying to make changes to the printer_ui, this is rather surprising behavior. To avoid this, you can put NO_AUTO_PATCH=yes in your localconfig.mk.

You almost certainly want to build in Docker.

How do I contribute?

For better or for worse, we do most of our development discussion in Discord. Because of how much of a pain it is to merge printer_ui patches, please let other people know what you're working on!

We work with pull requests and bug reports on GitHub. Please reserve bug reports for actually triaged -- or, if not triaged, triageable -- bugs; if you have usage questions, please talk about those in "Discussions"!

Please be reasonable human beings to each other. It is just a 3D printer. If you have a problem, please chat with some of the maintainers and we will try to help you resolve it.

Who is X1Plus?

X1Plus was written by a small number of people, not all of whom wish to be publicly identified. You might see a handful names around the code from people who don't mind sharing their identity, but there were many more people behind the scenes who have contributed over time!

Miscellaneous stuff

This probably ought go into a wiki page, but, you know, here we are.

Building a kernel

As of writing, it's not necessary to build a kernel image yourself as there's one present in prebuilt. But you can! This might be desirable to enable other kernel features for development, or to build a kernel module against.

• Install prerequestites, including lz4 for compressing the final image.
• Install the appropriate toolchain.
• Grab the latest kernel source from our repository.
• Ensure the toolchain is on your PATH, and add LDFLAGS/CCFLAGS to point to the toolchain (unsure how necessary this is):

  export LDFLAGS="-L$TOOLCHAIN/gcc/linux-x86/arm/gcc-linaro-6.3.1-2017.05-x86_64_arm-linux-gnueabihf \
  -Larm-linux-gnueabihf/libc/usr/lib/ -L/usr/arm-linux-gnueabihf/lib/"
  export CCFLAGS="-I$TOOLCHAIN/include -I/usr/include"
  

• From the root of kernel folder, run make ARCH=arm CROSS_COMPILE=arm-linux-gnueabihf- O=build x1plus_defconfig
• Run make mrproper
• CD into build
• Run sed -i 's/YYLTYPE yylloc/extern YYLTYPE yylloc/' ./scripts/dtc/dtc-lexer.lex.c
• Run make ARCH=arm CROSS_COMPILE=arm-linux-gnueabihf- zImage to build the kernel.
  • You probably want to add -jn where n is the number of threads (logical cores) you have available to dramatically speed up building (using all threads may slow down OS).
  • Build output file is arch/arm/boot/zImage you can copy this over prebuilt/kernel to use it with this repo.