ibpsa · mwetter · Jun 21, 2024 · Jun 3, 2024 · Jun 5, 2024 · Jun 19, 2024
diff --git a/IBPSA/BoundaryConditions/WeatherData/Bus.mo b/IBPSA/BoundaryConditions/WeatherData/Bus.mo
@@ -2,8 +2,8 @@ within IBPSA.BoundaryConditions.WeatherData;
 expandable connector Bus "Data bus that stores weather data"
   extends Modelica.Icons.SignalBus;
 
-  Modelica.Units.SI.Temperature TDryBul "Dry bulb temperature";
-  Modelica.Units.SI.Temperature TWetBul "Wet bulb temperature";
+  Modelica.Units.SI.Temperature TDryBul(start=293.15) "Dry bulb temperature";
+  Modelica.Units.SI.Temperature TWetBul(start=293.15) "Wet bulb temperature";
   Modelica.Units.SI.Temperature TDewPoi "Dew point temperature";
   Modelica.Units.SI.Temperature TBlaSky "Black-body sky temperature";
 
@@ -50,6 +50,12 @@ This component is an expandable connector that is used to implement a bus that c
 </html>", revisions="<html>
 <ul>
 <li>
+June 18, 2024, by Michael Wetter:<br/>
+Added <code>start</code> and <code>nominal</code> attributes
+to avoid warnings in OpenModelica due to conflicting values.<br/>
+This is for <a href=\"https://github.com/ibpsa/modelica-ibpsa/issues/1890\">IBPSA, #1890</a>.
+</li>
+<li>
 September 22, 2023, by Michael Wetter:<br/>
 Declared the variables that are on the bus.<br/>
 This is for <a href=\"https://github.com/ibpsa/modelica-ibpsa/issues/1798\">IBPSA, #1798</a>.

diff --git a/IBPSA/Fluid/Interfaces/ConservationEquation.mo b/IBPSA/Fluid/Interfaces/ConservationEquation.mo
@@ -35,7 +35,8 @@ model ConservationEquation "Lumped volume with mass and energy balance"
 
   // Outputs that are needed in models that use this model
   Modelica.Blocks.Interfaces.RealOutput hOut(unit="J/kg",
-                                             start=hStart)
+                                             start=hStart,
+                                             nominal=Medium.h_default)
     "Leaving specific enthalpy of the component"
      annotation (Placement(transformation(extent={{-10,-10},{10,10}},
         rotation=90,
@@ -70,7 +71,9 @@ model ConservationEquation "Lumped volume with mass and energy balance"
         origin={110,-60})));
 
   Modelica.Fluid.Vessels.BaseClasses.VesselFluidPorts_b ports[nPorts](
-      redeclare each final package Medium = Medium) "Fluid inlets and outlets"
+      redeclare each final package Medium = Medium,
+      each h_outflow(nominal=Medium.h_default),
+      each Xi_outflow(each nominal=0.01)) "Fluid inlets and outlets"
     annotation (Placement(transformation(extent={{-40,-10},{40,10}},
       origin={0,-100})));
 
@@ -427,6 +430,12 @@ IBPSA.Fluid.MixingVolumes.MixingVolume</a>.
 </html>", revisions="<html>
 <ul>
 <li>
+June 18, 2024, by Michael Wetter:<br/>
+Added <code>start</code> and <code>nominal</code> attributes
+to avoid warnings in OpenModelica due to conflicting values.<br/>
+This is for <a href=\"https://github.com/ibpsa/modelica-ibpsa/issues/1890\">IBPSA, #1890</a>.
+</li>
+<li>
 October 24, 2022, by Michael Wetter:<br/>
 Conditionally removed assertion that checks for water content as this is
 only required if water is added to the medium.<br/>
@@ -561,7 +570,7 @@ The model requires derivatives of some inputs as listed below:
 1 inlet.p
 </pre>
 when translating
-<code>Buildings.Fluid.FMI.ExportContainers.Examples.FMUs.HeaterCooler_u</code>
+<code>IBPSA.Fluid.FMI.ExportContainers.Examples.FMUs.HeaterCooler_u</code>
 with a dynamic energy balance.
 </li>
 <li>

diff --git a/IBPSA/Fluid/Interfaces/PartialTwoPort.mo b/IBPSA/Fluid/Interfaces/PartialTwoPort.mo
@@ -18,13 +18,19 @@ partial model PartialTwoPort "Partial component with two ports"
   Modelica.Fluid.Interfaces.FluidPort_a port_a(
     redeclare final package Medium = Medium,
      m_flow(min=if allowFlowReversal then -Modelica.Constants.inf else 0),
-     h_outflow(start = Medium.h_default, nominal = Medium.h_default))
+     h_outflow(
+       start = Medium.h_default,
+       nominal = Medium.h_default),
+     Xi_outflow(each nominal=0.01))
     "Fluid connector a (positive design flow direction is from port_a to port_b)"
     annotation (Placement(transformation(extent={{-110,-10},{-90,10}})));
   Modelica.Fluid.Interfaces.FluidPort_b port_b(
     redeclare final package Medium = Medium,
     m_flow(max=if allowFlowReversal then +Modelica.Constants.inf else 0),
-     h_outflow(start = Medium.h_default, nominal = Medium.h_default))
+     h_outflow(
+       start = Medium.h_default,
+       nominal = Medium.h_default),
+     Xi_outflow(each nominal=0.01))
     "Fluid connector b (positive design flow direction is from port_a to port_b)"
     annotation (Placement(transformation(extent={{110,-10},{90,10}})));
 
@@ -48,6 +54,12 @@ users have not used this global definition to assign parameters.
 </html>", revisions="<html>
 <ul>
 <li>
+June 18, 2024, by Michael Wetter:<br/>
+Added <code>start</code> and <code>nominal</code> attributes
+to avoid warnings in OpenModelica due to conflicting values.<br/>
+This is for <a href=\"https://github.com/ibpsa/modelica-ibpsa/issues/1890\">IBPSA, #1890</a>.
+</li>
+<li>
 January 18, 2019, by Jianjun Hu:<br/>
 Limited the media choice.
 See <a href=\"https://github.com/ibpsa/modelica-ibpsa/issues/1050\">#1050</a>.

diff --git a/IBPSA/Fluid/MixingVolumes/BaseClasses/PartialMixingVolume.mo b/IBPSA/Fluid/MixingVolumes/BaseClasses/PartialMixingVolume.mo
@@ -30,7 +30,10 @@ model PartialMixingVolume
     annotation(Dialog(tab="Assumptions"), Evaluate=true);
   parameter Modelica.Units.SI.Volume V "Volume";
   Modelica.Fluid.Vessels.BaseClasses.VesselFluidPorts_b ports[nPorts](
-      redeclare each package Medium = Medium) "Fluid inlets and outlets"
+      redeclare each package Medium = Medium,
+      each h_outflow(nominal=Medium.h_default),
+      each Xi_outflow(each nominal=0.01)
+      ) "Fluid inlets and outlets"
     annotation (Placement(transformation(extent={{-40,-10},{40,10}},
       origin={0,-100})));
 
@@ -119,12 +122,15 @@ protected
   Modelica.Blocks.Interfaces.RealOutput COut_internal[Medium.nC](each unit="1")
     "Internal connector for leaving trace substances of the component";
 
-  Modelica.Thermal.HeatTransfer.Sources.PrescribedTemperature preTem
+  Modelica.Thermal.HeatTransfer.Sources.PrescribedTemperature preTem(
+    port(T(start=T_start)))
     "Port temperature"
     annotation (Placement(transformation(extent={{-40,-10},{-60,10}})));
   Modelica.Blocks.Sources.RealExpression portT(y=T) "Port temperature"
     annotation (Placement(transformation(extent={{-10,-10},{-30,10}})));
-  Modelica.Thermal.HeatTransfer.Sensors.HeatFlowSensor heaFloSen
+  Modelica.Thermal.HeatTransfer.Sensors.HeatFlowSensor heaFloSen(
+    port_a(T(start=T_start)),
+    port_b(T(start=T_start)))
     "Heat flow sensor"
     annotation (Placement(transformation(extent={{-90,-10},{-70,10}})));
 equation
@@ -305,6 +311,12 @@ IBPSA.Fluid.MixingVolumes</a>.
 </html>", revisions="<html>
 <ul>
 <li>
+June 18, 2024, by Michael Wetter:<br/>
+Added <code>start</code> and <code>nominal</code> attributes
+to avoid warnings in OpenModelica due to conflicting values.<br/>
+This is for <a href=\"https://github.com/ibpsa/modelica-ibpsa/issues/1890\">IBPSA, #1890</a>.
+</li>
+<li>
 October 24, 2022, by Michael Wetter:<br/>
 Improved conversion from <code>Xi</code> to <code>X</code> so that it also works
 with media that have <code>reducedX=true</code>.<br/>

diff --git a/IBPSA/Fluid/Movers/BaseClasses/PartialFlowMachine.mo b/IBPSA/Fluid/Movers/BaseClasses/PartialFlowMachine.mo
@@ -84,7 +84,8 @@ partial model PartialFlowMachine
     annotation (Placement(transformation(extent={{100,80},{120,100}}),
         iconTransformation(extent={{100,80},{120,100}})));
 
-  Modelica.Thermal.HeatTransfer.Interfaces.HeatPort_a heatPort
+  Modelica.Thermal.HeatTransfer.Interfaces.HeatPort_a heatPort(
+    T(start=293.15))
     "Heat dissipation to environment"
     annotation (Placement(transformation(extent={{-70,-110},{-50,-90}}),
         iconTransformation(extent={{-10,-78},{10,-58}})));
@@ -260,7 +261,8 @@ protected
     annotation (Placement(transformation(extent={{50,-90},{70,-70}})));
 
   Modelica.Thermal.HeatTransfer.Sources.PrescribedHeatFlow prePow(
-    final alpha=0)
+    final alpha=0,
+    port(T(start=293.15)))
  if addPowerToMedium
     "Prescribed power (=heat and flow work) flow for dynamic model"
     annotation (Placement(transformation(extent={{-14,-104},{-34,-84}})));
@@ -639,6 +641,12 @@ See discussions in
 revisions="<html>
 <ul>
 <li>
+June 18, 2024, by Michael Wetter:<br/>
+Added <code>start</code> and <code>nominal</code> attributes
+to avoid warnings in OpenModelica due to conflicting values.<br/>
+This is for <a href=\"https://github.com/ibpsa/modelica-ibpsa/issues/1890\">IBPSA, #1890</a>.
+</li>
+<li>
 March 29, 2023, by Hongxiang Fu:<br/>
 Removed the gain block that normalised the speed input
 because it is no longer needed. This is for

diff --git a/IBPSA/Fluid/Sources/BaseClasses/PartialAirSource.mo b/IBPSA/Fluid/Sources/BaseClasses/PartialAirSource.mo
@@ -17,7 +17,9 @@ partial model PartialAirSource
     each m_flow(max=if flowDirection == Modelica.Fluid.Types.PortFlowDirection.Leaving
                     then 0 else +Modelica.Constants.inf,
                 min=if flowDirection == Modelica.Fluid.Types.PortFlowDirection.Entering
-                    then 0 else -Modelica.Constants.inf))
+                    then 0 else -Modelica.Constants.inf),
+    each h_outflow(nominal=Medium.h_default),
+    each Xi_outflow(each nominal=0.01))
     "Fluid ports"
     annotation (Placement(transformation(extent={{90,40},{110,-40}})));
 
@@ -26,7 +28,9 @@ protected
     "Allowed flow direction" annotation (Evaluate=true, Dialog(tab="Advanced"));
   Modelica.Blocks.Interfaces.RealInput p_in_internal(final unit="Pa")
     "Needed to connect to conditional connector";
-  Medium.BaseProperties medium if verifyInputs "Medium in the source";
+  Medium.BaseProperties medium(
+      T(start=Medium.T_default)
+    ) if verifyInputs "Medium in the source";
   Modelica.Blocks.Interfaces.RealInput Xi_in_internal[Medium.nXi](
     each final unit = "kg/kg")
     "Needed to connect to conditional connector";
@@ -80,6 +84,12 @@ IBPSA.Fluid.Sources.BaseClasses.PartialSource</a>.
 </html>", revisions="<html>
 <ul>
 <li>
+June 18, 2024, by Michael Wetter:<br/>
+Added <code>start</code> and <code>nominal</code> attributes
+to avoid warnings in OpenModelica due to conflicting values.<br/>
+This is for <a href=\"https://github.com/ibpsa/modelica-ibpsa/issues/1890\">IBPSA, #1890</a>.
+</li>
+<li>
 January 09, 2023, by Jianjun Hu:<br/>
 First implementation, specifically for the moist air source.<br/>
 This is for

diff --git a/IBPSA/Fluid/Sources/BaseClasses/PartialSource.mo b/IBPSA/Fluid/Sources/BaseClasses/PartialSource.mo
@@ -23,7 +23,9 @@ partial model PartialSource
     each m_flow(max=if flowDirection == Modelica.Fluid.Types.PortFlowDirection.Leaving
                     then 0 else +Modelica.Constants.inf,
                 min=if flowDirection == Modelica.Fluid.Types.PortFlowDirection.Entering
-                    then 0 else -Modelica.Constants.inf))
+                    then 0 else -Modelica.Constants.inf),
+    each h_outflow(nominal=Medium.h_default),
+    each Xi_outflow(each nominal=0.01))
     "Fluid ports"
     annotation (Placement(transformation(extent={{90,40},{110,-40}})));
 
@@ -87,6 +89,12 @@ IBPSA.Fluid.Sources.BaseClasses.PartialAirSource</a>.
 </html>", revisions="<html>
 <ul>
 <li>
+June 18, 2024, by Michael Wetter:<br/>
+Added <code>start</code> and <code>nominal</code> attributes
+to avoid warnings in OpenModelica due to conflicting values.<br/>
+This is for <a href=\"https://github.com/ibpsa/modelica-ibpsa/issues/1890\">IBPSA, #1890</a>.
+</li>
+<li>
 April 1, 2021, by Michael Wetter:<br/>
 Corrected misplaced <code>each</code> and added missing instance comment.<br/>
 See <a href=\"https://github.com/ibpsa/modelica-ibpsa/issues/1462\">IBPSA, #1462</a>.

diff --git a/IBPSA/Media/Air.mo b/IBPSA/Media/Air.mo
@@ -84,15 +84,18 @@ package Air
   Modelica.Media.Interfaces.Types.Temperature T(
    stateSelect=if preferredMediumStates then StateSelect.prefer else StateSelect.default)
    "Temperature of medium";
-  Modelica.Media.Interfaces.Types.MassFraction[2] X(start=reference_X)
+  Modelica.Media.Interfaces.Types.MassFraction[2] X(
+    start=reference_X,
+    nominal={0.01, 1})
     "Mass fractions (= (component mass)/total mass  m_i/m)";
   Modelica.Media.Interfaces.Types.SpecificInternalEnergy u
     "Specific internal energy of medium";
   Modelica.Media.Interfaces.Types.SpecificHeatCapacity R_s
     "Gas constant (of mixture if applicable)";
   Modelica.Media.Interfaces.Types.MolarMass MM
     "Molar mass (of mixture or single fluid)";
-  ThermodynamicState state
+  ThermodynamicState state(
+    X(nominal={0.01, 1}))
     "Thermodynamic state record for optional functions";
 
     Modelica.Units.NonSI.Temperature_degC T_degC=
@@ -1057,6 +1060,12 @@ if <i>T=0</i> &deg;C and no water vapor is present.
 </html>", revisions="<html>
 <ul>
 <li>
+June 18, 2024, by Michael Wetter:<br/>
+Added <code>start</code> and <code>nominal</code> attributes
+to avoid warnings in OpenModelica due to conflicting values.<br/>
+This is for <a href=\"https://github.com/ibpsa/modelica-ibpsa/issues/1890\">IBPSA, #1890</a>.
+</li>
+<li>
 September 9, 2022, by Michael Wetter:<br/>
 Set nominal attribute for <code>BaseProperties.Xi</code>.<br/>
 This is for

diff --git a/IBPSA/Media/Water.mo b/IBPSA/Media/Water.mo
@@ -19,8 +19,9 @@ package Water "Package with model for liquid water with constant density"
     final parameter Boolean standardOrderComponents=true
       "If true, and reducedX = true, the last element of X will be computed from the other ones";
     Modelica.Units.SI.Density d=d_const "Density of medium";
-    Temperature T(stateSelect=
-      if preferredMediumStates then StateSelect.prefer else StateSelect.default)
+    Temperature T(
+      start=293.15,
+      stateSelect=if preferredMediumStates then StateSelect.prefer else StateSelect.default)
       "Temperature of medium";
     InputAbsolutePressure p "Absolute pressure of medium";
     InputMassFraction[nXi] Xi=fill(0, 0)
@@ -174,6 +175,12 @@ There are no phase changes.
 </html>", revisions="<html>
 <ul>
 <li>
+June 18, 2024, by Michael Wetter:<br/>
+Added <code>start</code> and <code>nominal</code> attributes
+to avoid warnings in OpenModelica due to conflicting values.<br/>
+This is for <a href=\"https://github.com/ibpsa/modelica-ibpsa/issues/1890\">IBPSA, #1890</a>.
+</li>
+<li>
 September 28, 2020, by Michael Wetter:<br/>
 Reformulated <code>BaseProperties</code> to avoid event-triggering assertions.<br/>
 This is for
@@ -251,7 +258,7 @@ to fail with the error message
 <li>
 October 15, 2014, by Michael Wetter:<br/>
 Reimplemented media based on
-<a href=\"https://github.com/ibpsa/modelica-ibpsa/blob/446aa83720884052476ad6d6d4f90a6a29bb8ec9/IBPSA/Media/Water.mo\">446aa83</a>.
+<a href=\"https://github.com/ibpsa/modelica-ibpsa/blob/446aa83720884052476ad6d6d4f90a6a29bb8ec9/Annex60/Media/Water.mo\">446aa83</a>.
 </li>
 <li>
 November 15, 2013, by Michael Wetter:<br/>

diff --git a/IBPSA/Utilities/Psychrometrics/TWetBul_TDryBulPhi.mo b/IBPSA/Utilities/Psychrometrics/TWetBul_TDryBulPhi.mo
@@ -25,7 +25,7 @@ block TWetBul_TDryBulPhi
     annotation (Placement(transformation(extent={{-120,-90},{-100,-70}})));
 
   Modelica.Blocks.Interfaces.RealOutput TWetBul(
-    start=Medium.T_default-2,
+    start=Medium.T_default,
     final quantity="ThermodynamicTemperature",
     final unit="K",
     min=0) "Wet bulb temperature"
@@ -177,6 +177,12 @@ DOI: 10.1175/JAMC-D-11-0143.1
 revisions="<html>
 <ul>
 <li>
+June 18, 2024, by Michael Wetter:<br/>
+Added <code>start</code> and <code>nominal</code> attributes
+to avoid warnings in OpenModelica due to conflicting values.<br/>
+This is for <a href=\"https://github.com/ibpsa/modelica-ibpsa/issues/1890\">IBPSA, #1890</a>.
+</li>
+<li>
 March 6, 2023, by Michael Wetter:<br/>
 Added a constant in order for unit check to pass.<br/>
 See  <a href=\"https://github.com/ibpsa/modelica-ibpsa/issues/1711\">#1711</a>