Corrected the use of displayUnit

For #1826
ibpsa · Jan 15, 2024 · 907890b · 907890b
1 parent 8c89af8
commit 907890b
Show file tree

Hide file tree

Showing 3 changed files with 4 additions and 4 deletions.
diff --git a/IBPSA/Fluid/Movers/Data/Generic.mo b/IBPSA/Fluid/Movers/Data/Generic.mo
@@ -98,7 +98,7 @@ record Generic "Generic data record for movers"
   parameter Boolean motorCooledByFluid=true
     "If true, then motor heat is added to fluid stream"
     annotation(Dialog(group="Motor heat rejection"));
-  parameter Modelica.Units.SI.Power WMot_nominal(final displayUnit="W")=
+  parameter Modelica.Units.SI.Power WMot_nominal=
     if max(power.P)>Modelica.Constants.eps
     then
       if powerOrEfficiencyIsHydraulic

diff --git a/IBPSA/Fluid/Movers/FlowControlled_dp.mo b/IBPSA/Fluid/Movers/FlowControlled_dp.mo
@@ -77,7 +77,7 @@ model FlowControlled_dp
 
   Modelica.Blocks.Interfaces.RealInput dpMea(
     final quantity="PressureDifference",
-    final displayUnit="Pa",
+    displayUnit="Pa",
     final unit="Pa")=gain.u if prescribeSystemPressure
     "Measurement of pressure difference between two points where the set point should be obtained"
     annotation (Placement(transformation(

diff --git a/IBPSA/Obsolete/Fluid/Movers/Data/Generic.mo b/IBPSA/Obsolete/Fluid/Movers/Data/Generic.mo
@@ -17,7 +17,7 @@ record Generic "Generic data record for movers"
                 * pressure.dp[end])
     else 0
       "Volume flow rate on the curve when pressure rise is zero";
-  parameter Modelica.Units.SI.PressureDifference dpMax=
+  parameter Modelica.Units.SI.PressureDifference dpMax(displayUnit="Pa")=
     if havePressureCurve
       then (pressure.dp[1]
                 -(pressure.dp[1] - pressure.dp[2])
@@ -97,7 +97,7 @@ record Generic "Generic data record for movers"
   parameter Boolean motorCooledByFluid=true
     "If true, then motor heat is added to fluid stream"
     annotation(Dialog(group="Motor heat rejection"));
-  parameter Modelica.Units.SI.Power WMot_nominal(final displayUnit="W")=
+  parameter Modelica.Units.SI.Power WMot_nominal=
     if max(power.P)>Modelica.Constants.eps
     then
       if powerOrEfficiencyIsHydraulic