HPCC-32734 Add ElasticSearch metric sink configuration

helm/examples/metrics/README.md

@@ -177,3 +177,114 @@ HPCC metrics can be easily routed to Azure Insights for application level monito
       11/5/2021, 9:02:00.000 PM	prometheus	esp_requests_active	0	{"app":"eclservices","namespace":"default","pod_name":"eclservices-778477d679-vgpj2"}
       11/5/2021, 9:02:00.000 PM	prometheus	esp_requests_active	3	{"app":"eclservices","namespace":"default","pod_name":"eclservices-778477d679-vgpj2"}
       ```
+###  ElasticSearch Support
+HPCC metrics can be routed to ElasticSearch for advanced metrics processing and 
+alerting. This process involves two requirements: enabling the ElasticSearch metric 
+sink, and configuring the index in ElasticSearch to receive the metrics.
+
+Since the metrics configuration is common across all HPCC components, the ElasticSearch
+sink will report metrics from all components to the same index. Therefore, the
+index must be configured to receive metrics from all components. 
+
+#### Index Configuration
+The index must be created in ElasticSearch before metrics can be reported to it. The name is passed
+to the sink as a configuration setting. The index must be created with the following settings:
+
+##### Dynamic Mapping
+The index must be created with dynamic mapping enabled. Dynamic mapping allows framework metric 
+data types to be stored in the index in their native types. Without dynamic mapping, the ElasticSearch
+default mapping does not properly map value to unsigned 64-bit integers. 
+
+To create an index with dynamic mapping, use the following object when creating the index:
+```code json
+{
+  "mappings": {
+    "dynamic_templates": [
+      {
+        "hpcc_metric_count_to_unsigned_long": {
+          "match": "*_count",
+          "mapping": {
+            "type": "unsigned_long"
+          }
+        }
+      },
+      {
+        "hpcc_metric_gauge_to_unsigned_long": {
+          "match": "*_gauge",
+          "mapping": {
+            "type": "unsigned_long"
+          }
+        }
+      },
+      {
+        "hpcc_metric_histogram_to_histogram": {
+          "match": "*_histogram",
+          "mapping": {
+            "type": "histogram"
+          }
+        }
+      }
+    ]
+  }
+}  
+```
+
+Note that there may be other means for adding the required dynamic mapping to the index. 
+
+The _match_ values above are representative of typical values. The actual values may
+vary depending on the cluster configuration and shared use of the index across multiple clusters.
+In all cases, the configuration of the sink must match that of the dynamic mappings in the index.
+
+#### Enabling ElasticSearch Metrics Sink for Kubernetes
+To enable reporting of metrics to ElasticSearch, add the metric configuration settings to 
+the helm chart. 
+
+The provided HPCC helm chart provides all global settings from its values.yml file to all components. 
+To enable metrics reporting, either include the metrics configuration as a permanent part of 
+your HPCC helm chart values.yml file, or add it as command line settings at chart installation. 
+To enable the ElasticSearch sink on the command line, use the following to add the ElasticSearch 
+settings:
+
+```code
+helm install mycluster ./hpcc -f <path>/elasticsearch_metrics.yml
+```
+An example _yml_ file can be found in the repository at helm/examples/metrics/elasticsearch_metrics.yml.
+Make a copy and modify as needed for your installation.
+
+##### Configuration Settings
+The ElasticSearch sink defines the following settings:
+
+* hostProtocol - The protocol used to connect to the ElasticSearch server. (default: https)
+* hostName - The host name or IP address of the ElasticSearch server. (required)
+* hostPort - The port number of the ElasticSearch server. (default: 9200)
+* indexName - The name of the index to which metrics are reported. (required)
+* countMetricSuffix - The suffix used to identify count metrics. (default: count)
+* gaugeMetricSuffix - The suffix used to identify gauge metrics. (default: gauge)
+* histogramMetricSuffix - The suffix used to identify histogram metrics. (default: histogram)
+
+Standard periodic metric sink settings are also available.
+
+#### Enabling ElasticSearch Metrics Sink for Bare Metal
+To enable reporting of metrics to ElasticSearch, add the metric configuration settings to
+the environment configuration file (enviroment.xml). These settings must be added manually
+since there is no support in the config manager.
+
+Add the following to the environment configuration file (note only the required
+settings are shown):
+
+```code xml
+
+<Environment>
+    <Software>
+        <metrics name="mymetricsconfig">
+            <sinks name="myelasticsink" type="elastic">
+                <settings period="30" ignoreZeroMetrics="1">
+                    <host name="<hostname>" port="<port>" protocol="http|htps"/>
+                    <index name="<index>"/> 
+                <settings/>
+            </sinks>
+        </metrics>
+    </Software>
+</Environment>
+```
+See section above for additional settings that can be added to the ElasticSearch sink.

helm/examples/metrics/elasticsearch_metrics.yaml

@@ -0,0 +1,36 @@
+#
+# Defines an elastic sink for reporting metrics to an ElasticSearch instance
+# Settings:
+#   type                                - sink type (must be elastic for ElasticSearch support)
+#   name                                - name for the sink instance
+#   settings.countMetricSuffix          - suffix for count metrics (default: count)
+#   settings.gaugeMetricSuffix          - suffix for gauge metrics (default: gauge)
+#   settings.histogramMetricSuffix      - suffix for histogram metrics (default: histogram)
+#   settings.host                       - ElasticSearch host settings
+#   settings.host.protocol               - protocol to use, http or https (default)
+#   settings.host.name                   - host name
+#   settings.host.port                   - port number (default 9200)
+#   settings.index                       - ElasticSearch index settings
+#   settings.index.name                  - index name
+#
+# If not overridden, the following suffixes are used by default:
+#   countMetricSuffix: count
+#   gaugeMetricSuffix: gauge
+#   histogramMetricSuffix: histogram
+
+global:
+  metrics:
+    sinks:
+    - type: elastic
+      name: myelasticsink
+      settings:
+        countMetricSuffix: count
+        gaugeMetricSuffix: gauge
+        histogramMetricSuffix: histogram
+        host:
+          protocol: https
+          name: hostname
+          port: 9200
+        index:
+          name: hpccmetrics
+

system/metrics/sinks/elastic/elasticSink.cpp

@@ -12,7 +12,6 @@
 ############################################################################## */
 
 #include "elasticSink.hpp"
-
 #include "nlohmann/json.hpp"
 
 //including cpp-httplib single header file REST client
@@ -43,8 +42,66 @@ ElasticMetricSink::ElasticMetricSink(const char *name, const IPropertyTree *pSet
     PeriodicMetricSink(name, "elastic", pSettingsTree)
 {
     ignoreZeroMetrics = pSettingsTree->getPropBool("@ignoreZeroMetrics", true);
-    pSettingsTree->getProp("@elasticHost", elasticHost);
-    pSettingsTree->getProp("@indexName", indexName);
+
+    StringBuffer hostName;
+    StringBuffer hostProtocol;
+    StringBuffer hostPort;
+
+    Owned<IPropertyTree> pHostConfigTree = pSettingsTree->getPropTree("host");
+    if (pHostConfigTree)
+    {
+        pHostConfigTree->getProp("@name", hostName);
+
+        if (!pHostConfigTree->getProp("@protocol", hostProtocol))
+        {
+            hostProtocol.append("https");
+        }
+
+        if (!pHostConfigTree->getProp("@port", hostPort))
+        {
+            hostPort.append("9200");
+        }
+    }
+
+    if (!hostName.isEmpty() && !hostPort.isEmpty() && !hostProtocol.isEmpty())
+    {
+        elasticHostUrl.append(hostProtocol).append("://").append(hostName).append(":").append(hostPort);
+    }
+    else
+    {
+        WARNLOG("ElasticMetricSink: Host configuration missing or invalid");
+    }
+
+    Owned<IPropertyTree> pIndexConfigTree = pSettingsTree->getPropTree("index");
+    if (pIndexConfigTree)
+    {
+        pSettingsTree->getProp("@name", indexName);
+    }
+
+    if (indexName.isEmpty())
+    {
+        WARNLOG("ElasticMetricSink: Index configuration missing or invalid");
+    }
+
+
+    // Both a host url and an index name are required
+    configurationValid = !elasticHostUrl.isEmpty() && !indexName.isEmpty();
+
+    // Initialize standard suffixes
+    if (!pSettingsTree->getProp("@countMetricSuffix", countMetricSuffix))
+    {
+        countMetricSuffix.append("count");
+    }
+
+    if (!pSettingsTree->getProp("@gaugeMetricSuffix", gaugeMetricSuffix))
+    {
+        gaugeMetricSuffix.append("gauge");
+    }
+
+    if (!pSettingsTree->getProp("@histogramMetricSuffix", histogramMetricSuffix))
+    {
+        histogramMetricSuffix.append("histogram");
+    }
 }
 
 
@@ -62,6 +119,6 @@ void ElasticMetricSink::doCollection()
 
 void ElasticMetricSink::collectingHasStopped()
 {
-    ;
+
 }
 

system/metrics/sinks/elastic/elasticSink.hpp

@@ -38,5 +38,9 @@ class ELASTICSINK_API ElasticMetricSink : public hpccMetrics::PeriodicMetricSink
 protected:
     StringBuffer indexName;
     bool ignoreZeroMetrics = false;
-    StringBuffer elasticHost;
+    StringBuffer elasticHostUrl;
+    StringBuffer countMetricSuffix;
+    StringBuffer gaugeMetricSuffix;
+    StringBuffer histogramMetricSuffix;
+    bool configurationValid = false;
 };