Using OpenWebRX with FiFi SDR

FiFi SDR can be used with OpenWebRX via audio card interface.

Edit config_webrx.py:

start_rtl_command="arecord -D hw:1,0 -f S16_LE -r {samp_rate} -c2 -".format(samp_rate=samp_rate)
format_conversion="csdr convert_s16_f"
samp_rate=192000

Also set center_freq correctly.

You cannot control FiFi SDR from within OpenWebRX. Use the rockprog tool to set the receiver parameters (like center frequency). It can be found here:

http://o28.sischa.net/fifisdr/trac/wiki/De:rockprog

This information was shared by Benjamin, HB3YIW. Thanks for that!