Adapta-gtk-theme

An adaptive Gtk+ theme based on Material Design Guidelines.

04 Oct 2018

• Re-lock issues until we hunt a new maintainer (owner) of this project.

02 Oct 2018

• Reverted all changes to 3.94.0.x.

Before using Adapta

Typography

Adapta strongly depends on Material Design resources, especially its fonts.

1. Roboto

• Very famous as the default truetype font in Android (English ver.).
• Multilingual support is not good.
• Weight used in Adapta: 300, 400, 500, 700

2. Noto Sans

• Noto (NO TOfu) sans-serif truetype/opentype font covers a lot of languages.
• Developed by Monotype and Adobe.
• Weight used in Adapta: 400, (500), 700

	Primary	Secondary	Fallback
Gnome-Shell >= 3.26	Roboto	NotoSans	Sans-serif
Gnome-Shell =< 3.24	NotoSans		Sans-serif
Cinnamon	Roboto		Sans-serif

Note:

• Roboto is very nice with Adapta, but in some locales, it causes Tofu.
• NotoSans may work well in various locales, but NotoSans lacks 500 (Medium) weight. So elements defined with 500 will be drawn with 400 automatically.
• NotoSans CJK supports 500 weight.
• NotoSans is used as the 'password chars U+25CF' only in Gnome-Shell >= 3.26.

Adapta is designed with nominal 13px (or 14px) Roboto font. In Gnome, "window-scaling-factor = 1.0" means -gtk-dpi = 96, it also means:

13 [px] x 72 [pt/inch] / 96 [px/inch] = 9.75 [pt]
14 [px] x 72 [pt/inch] / 96 [px/inch] = 10.5 [pt]

That's the reason why 13.33px = 10pt is used for rem/px conversion in Gtk+ 3.2x theming (In Gtk+ 3.18.x theming, em unit is directly used).

Note:

NotoSans CJK (ChineseJapaneseKorean) opentype fonts are actually 0.1em taller than Roboto fonts, so if 10pt Roboto was suitable on your LCDs, set 9pt for NotoSans CJK families.

Verify the fonts are rendered correctly via font-viewer tools like Gnome-Font-Viewer.

Variant Matrix

	Adapta	Adapta-Nokto	Adapta-Eta	Adapta-Nokto-Eta
Gtk+ 2.24.x
Gtk+ 3.20.x
Gtk+ 3.22.x
Gtk+ 3.24.x
Mutter
Metacity
Muffin
XFwm4
Marco
Openbox-3

Note:

• Nokto is a dark variant.
• Eta is a tiny Gtk+ 2.x/3.2x Gtk+ widget variant for saving space.
• I suggest you use the Eta variants if your LCD resolution is lower than FHD (1080p). Eta draws widgets around -20% to -30% spacing.
• Metacity theming supports Eta variants (>= 3.2x).

Elements

Required Components

Adapta supports Gtk+ 3.24.x, 3.22.x and 3.20.x

* Gtk+-3.0             >= 3.20.0
* Gtk+-2.0             >= 2.24.30
* gtk2-engines-pixbuf  >= 2.24.30
* gtk2-engines-murrine >= 0.98.1

Supported Desktop Environments

* GNOME-Shell     >= 3.20.0
* GNOME-Flashback >= 3.20
* Budgie-Desktop  >= 10.4
* Cinnamon        >= 3.2.0
* XFce4           >= 4.12.2
* Mate            >= 1.14.0
* LXDE            >= 0.99.1 (Gtk+ 2.x only)

Unsupported Gtk+ Based Desktop(s)

• Pantheon
• Unity7

Note:

• Adapta does NOT support elementaryOS.

Installation from Package(s)

Package(s) can be found in the official main repositories of these distributions:

• Arch (community)

• Fedora

• openSUSE (Tumbleweed)

• Solus

Personal repository:

• PPA: Stable-channel and Dev-channel

Installation from Git Source

1. If previous versions were installed/existed, remove them first.

sudo rm -rf /usr/share/themes/{Adapta,Adapta-Eta,Adapta-Nokto,Adapta-Nokto-Eta}
rm -rf ~/.local/share/themes/{Adapta,Adapta-Eta,Adapta-Nokto,Adapta-Nokto-Eta}
rm -rf ~/.themes/{Adapta,Adapta-Eta,Adapta-Nokto,Adapta-Nokto-Eta}

2. Check build-requirements: Currently Adapta bundles neither pre-generated stylesheets nor PNG images. So users and/or contributors should generate proper CSSs, PNGs and gresources at build-time.

* autoconf
* automake
* inkscape                                  >= 0.91
* libgdk-pixbuf2.0-dev (gdk-pixbuf2-devel)  >= 2.32.2
* libglib2.0-dev (glib2-devel)              >= 2.48.0
* libxml2-utils (libxml2)
* pkg-config (pkgconfig)
* sassc                                     >= 3.3

* parallel                                  (if --enable-parallel)

Note:

• In OpenSUSE, add an extra dependency:

  gdk-pixbuf-devel        >= 2.32.2
  

• Adapta employs SassC wrapper of libsass to generate CSS stylesheets.

• Adapta uses inkscape to generate installable PNG files.

• Adapta uses glib-compile-resources to compile the gresource files for Gtk+ and Gnome-Shell.

• glib-2.0 >= 2.53, Gnome-Shell 3.26 theming is used if --enable-gnome.

3. Build and install system-wide:

./autogen.sh --prefix=/usr
make
sudo make install

Note:

• Default prefix is /usr/local.
• All 4 variants are installed by default.
• make generates proper CSSs and PNGs to be installed. It will take about 5min to 15min to build. For example, Ubuntu's build-server takes 10min.
• sudo make install installs multiple versioned theme and Gtk+ automatically selects the properly versioned one when running.

4. To speed up by using concurrency-build, pass this specific option to autogen.sh:

--enable-parallel       enable parallel-build support (type: bool)

Note:

• This feature requires GNU parallel, so please add parallel to build-requirements. Parallel can execute multiple scripts and binaries to be suitable for multi-threading. It could especially shorten the rendering-time via inkscape.
• -jN option to be passed to GNU make is surely usable, but Adapta currently employs parallel.
• This feature should not be applied when packaging on remote/shared build-servers.

5. To disable some DE supports, pass these specific options to autogen.sh:

--disable-gnome         disable gnome-shell support (type: bool)
--disable-cinnamon      disable cinnamon support (type: bool)
--disable-flashback     disable flashback support (type: bool)
--disable-xfce          disable xfce support (type: bool)
--disable-mate          disable mate support (type: bool)
--disable-openbox       disable openbox support (type: bool)

Note:

• The installer installs Budgie-Desktop support even if all of options above were applied.
• Cinnamon/Mate support hooks metacity-1 directory even if GNOME-Flashback support was disabled.

6. To enable extra Gtk+ release support, pass these options:

--enable-gtk_next      enable Gtk+ 4.0 support (type: bool)

7. To change the default 4 Key-Colors, pass these options:

--with-selection_color        Primary color for 'selected-items' (Default: #00BCD4 = Cyan500, type: string)
--with-accent_color           Secondary color for notifications and OSDs (Default: #4DB6AC = Teal300, type: string)
--with-suggestion_color       Secondary color for 'suggested' buttons (Default: #009688 = Teal500, type: string)
--with-destruction_color      Tertiary color for 'destructive' buttons (Default: #FF5252 = RedA200, type: string)

Note:

• Color-codes are defined as # + 6-digit HEXs (Standard RGB definitions in HTML codes). Uppercases are strongly recommended in Adapta code-base.

• The Material Design Color Palette can be found here.

• Example: If you would like to use 'Teal500' as selection_color, use this:

  ./autogen.sh --with-selection_color=#009688

  This switchese the theme to almost Teal key colors.

• Basically selection_color and suggestion_color should use 500 colors, and accent_color should use 300 colors.

• While doing make, Adapta changes those 4 colors in all stylesheets and images, and make clean cleans up all generated files from source directories.

• This feature unfortunately is not supported in Openbox-3 and Telegram 1.0 theming.

GtkSourceView/Gedit Color Scheme Support

A theme file adapta.xml is installed by default into Adapta(-Nokto)/gedit directory. See details in README.md.

Note:

• The color-scheme can be used in Gnome-Builder, Gnome-Sushi, Meld and Gedit if installed to ~/.local/share/gtksourceview-3.0/styles or ~/.local/share/gtksourceview-4/styles directory.
• Currently only dark-variant is supported.

Visual Studio Code (VS Code) Theme Support

1. Linux-themes (Author: SolarLiner): Visual Studio Marketplace

2. Vscode-theme-adapted (Author: About-Code): Visual Studio Marketplace

Extra Browser Support

To try our color samples for FirefoxColor test pilot, check these URLs:

1. Adapta

2. Adapta-Nokto

To try legacy Chrome(ium) specific theming (< 59.0.30xx), pass this option:

--enable-chrome-legacy     enable legacy Chrome(ium) support (type: bool)

The compressed crx files will be installed into Adapta/chrome and Adapta-Nokto/chrome.

Note:

• Chrome(ium) 59.0.30xx or newer, theming is pulled from Gtk+ 3.x directly. So Settings > Appearance > Themes should be GTK+.

• Vivaldi can make custom themes via settings like these:

  Background: #FAFBFC (#263238)
  Foreground: #263238 (#CFD8DC)
  Highlight:  #00BCD4
  Accent:     #222D32
  Accent Color from Active Page: [ ]
  Apply Accent Color to Window:  [*]
  Transparent Tabs:              [*]
  Corner Rounding:               2px
  

Extra Dock Support

To try "Plank" theming, pass this option:

--enable-plank         enable Plank support (type: bool)

Then select Gtk+ via plank --preferences.

Note:

• Both Adapta and Adapta-Nokto shares the same theming.
• Don't expect too much. Plank is NOT a themeable widget for me!

Extra Compositor Support

Compton is the famous stand-alone compositor that works well with the Openbox window-manager. The installer installs recommended configuration file compton.conf into Adapta/openbox-3 directory if Openbox support is enabled.

Next, copy that file into ~/.config/ and restart compton to read the settings. That compositor still has some limitations in its features for Adapta, however.

Extra Telegram Support

To try "Telegram 1.0" theming, pass this option:

--enable-telegram      enable Telegram 1.0 support (type: bool)

The installer installs compressed tdesktop-theme files into Adapta/telegram and Adapta-Nokto/telegram directories if Telegram support is enabled. Then open the file via Telegram > Main Menu > Settings > Chat background > Choose from file.

Note:

• The adapta.tdesktop-theme is for light-variant, and adapta-nokto.tdesktop-theme is for dark-variant.
• Bundled noise-texture images are for tiled mode.
• Telegram support is a W.I.P currently.

Extra Tweetdeck Support

To try "Colordeck for Tweetdeck" extension theming, pass this option:

--enable-tweetdeck      enable Tweetdeck-colordeck support (type: bool)

The installer installs cdk files into Adapta*/tweetdeck directories if Tweetdeck support is enabled. Then open the file via Colordeck -> import > "Colors" -> Choose File.

Note:

• Chrome Web Store
• Firefox Add-ons
• Light and dark variants are supported.
• Currently those files support "Colors" only, so enabling "Colors" checkbox is enough.

Other Projects

This is a list of community projects, related to Adapta:

• Adapta KDE - Port of this theme to KDE Plasma 5.
• Discord-Adapta-Nokto - Adapta-oriented theme for Discord

Work in Progress

TODO

Public License

GPLv2.0

Note:

SVG files are licensed under CC BY-SA 4.0. And an icon-theme in Cinnamon thumbnails: Paper Icons by Sam Hewitt is licensed under CC-SA-4.0.

Donations

Special Thanks to

Nana-4, the developer of Materia (formerly Flat-Plat).

And all supporters, thank you.