Download and flash this image to your SD card. Start your Pi with the flashed SD card and enjoy instant Docker awesomeness. The latest releases can always be found on GitHub.
The default credentials for the image are user pirate with password hypriot.
| Description | Download Link | Description | Published |
| Version 1.9.0 | hypriotos-rpi-v1.9.0.img.zip Checksum | Docker 18.04.0-ce, kernel 4.14.34 | 28.04.2018 |
I used Etcher to write this image. I plugged the Raspi into Ethernet, a power plug, and a few seconds later tried
$ ssh pirate@black-pearl
pirate@black-pearl's password:
Linux black-pearl 4.14.34-hypriotos-v7+ \#1 SMP Sun Apr 22 14:57:31 UTC 2018 armv7l
HypriotOS (Debian GNU/Linux 9)
The programs included with the Debian GNU/Linux system are free software;
the exact distribution terms for each program are described in the
individual files in /usr/share/doc/\*/copyright.
Debian GNU/Linux comes with ABSOLUTELY NO WARRANTY, to the extent
permitted by applicable law.
HypriotOS/armv7: pirate@black-pearl in ~
I'm using DHCP, so I had to find the IP of the Raspi to change the configuration later on:
ifconfig
docker0: flags=4099<UP,BROADCAST,MULTICAST> mtu 1500
inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255
ether 02:42:b0:d0:bf:fa txqueuelen 0 (Ethernet)
RX packets 0 bytes 0 (0.0 B)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 0 bytes 0 (0.0 B)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
eth0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500
inet ip.of.your.raspberry netmask 255.255.248.0 broadcast ip.of.your.broadcast
inet6 fe80::1096:713d:a542:dfbb prefixlen 64 scopeid 0x20<link>
ether b8:27:eb:4b:11:0d txqueuelen 1000 (Ethernet)
RX packets 7423 bytes 1021610 (997.6 KiB)
RX errors 0 dropped 22 overruns 0 frame 0
TX packets 291 bytes 50988 (49.7 KiB)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
lo: flags=73<UP,LOOPBACK,RUNNING> mtu 65536
inet 127.0.0.1 netmask 255.0.0.0
inet6 ::1 prefixlen 128 scopeid 0x10<host>
loop txqueuelen 1000 (Local Loopback)
RX packets 70 bytes 5718 (5.5 KiB)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 70 bytes 5718 (5.5 KiB)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
wlan0: flags=4099<UP,BROADCAST,MULTICAST> mtu 1500
ether b8:27:eb:1e:44:58 txqueuelen 1000 (Ethernet)
RX packets 0 bytes 0 (0.0 B)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 0 bytes 0 (0.0 B)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
I wanted to run openSTF from /DATA so I created it.
sudo mkdir /DATA
cd /DATA
sudo chown -R pirate /DATA/
I'm unfortunate enough to work behind a proxy, so we will have to configure it at several places. Let's start with apt to fetch updates and install new packages
sudo nano /etc/apt/apt.conf
in which you will find
Acquire::http::Proxy "http://your.proxy.host:proxyPort";
We will then be able to install curl-config:
sudo -E apt-get update && apt-get install --reinstall libcurl4-openssl-dev
This will be needed later on to accept github certificate (or try to).
The first time I tried to clone the openSTF armv7 repo, I got an error saying my certificates could not be found. Of course, Stackoverflow got it covered. So I tried
hostname=github.com
port=443
trust_cert_file_location=`curl-config --ca`
We'll try to import the github certificate on our machine. If you also have a proxy, put on the command line:
sudo bash -c "echo -n | openssl s\_client -proxy your.proxy.host:proxyPort -showcerts -connect $hostname:$port \\
2>/dev/null | sed -ne '/-BEGIN CERTIFICATE-/,/-END CERTIFICATE-/p' \\
>>; $trust\_cert\_file\_location"
If you don't need any proxy, just get rid of the -proxy part.
As it is not working yet, we do export GIT_SSL_NO_VERIFY=1 which is not an pretty solution. We will have to investigate later on.
The solution to this issue is written somewhere in https://stackoverflow.com/questions/42616392/unable-to-correct-sudden-server-certificate-verification-failed* or https://stackoverflow.com/questions/35821245/github-server-certificate-verification-failed/35824116#35824116.
Now, we can at last clone the repo:
HypriotOS/armv7: pirate@black-pearl in /DATA
ALL_PROXY=http://your.proxy.host:proxyPort git clone https://github.com/jonathas/openstf-arm7-docker
Cloning into 'openstf-arm7-docker'...
remote: Counting objects: 10, done.
remote: Total 10 (delta 0), reused 0 (delta 0), pack-reused 10
Unpacking objects: 100% (10/10), done.
The repo is now available, but we will need to configure Docker to use the proxy because it won't be able to download the images:
docker-compose up --build
Pulling adb (mitchtech/arm-adb:)...
ERROR: Get https://registry-1.docker.io/v2/: net/http: request canceled while waiting for connection (Client.Timeout exceeded while awaiting headers)
We will have to create a docker.service.d directory in which we will create http-proxy.conf and https-proxy.conf.
sudo mkdir -p /etc/systemd/system/docker.service.d/
sudo vi /etc/systemd/system/docker.service.d/http-proxy.conf
sudo vi /etc/systemd/system/docker.service.d/https-proxy.conf
cat /etc/systemd/system/docker.service.d/https-proxy.conf
[Service]
Environment="HTTPS_PROXY=http://your.proxy.host:proxyPort"
Then we can ask Docker daemon to reload the config:
sudo systemctl daemon-reload
and if it doesn't work yet (which should not happen), we can restart Docker:
sudo systemctl restart docker
We can then check that the properties have been taken into account:
systemctl show --property=Environment docker
Environment=HTTP_PROXY=http://your.proxy.host:proxyPort HTTPS_PROXY=http://your.proxy.host:proxyPort
As everything now looks in order, we can launch openSTF:
docker-compose up --build
Pulling adb (mitchtech/arm-adb:)...
latest: Pulling from mitchtech/arm-adb
991507d4dcc6: Downloading \[=====> \] 3.385MB/32.88MB
2ad44321f88a: Download complete
2f39bd897657: Download complete
a3ed95caeb02: Download complete
38949773330c: Downloading \[======> \] 1.702MB/12.22MB
a6ac660d9104: Download com
### Launching openSTF
We can stop it, as we still have some configuration to do. In the openstf-arm7-docker the Readme reads:
- Open the docker-compose.yml file and edit the ip address there, entering your server's ip address instead
So,
- change the IP with the one you found with
ifconfigearlier.
version: "2"
services:
stf:
image: openstf/stf-armv7l
privileged: true
container_name: openstf
depends_on:
- db
- adb
network_mode: host
command: "stf local --public-ip ip.of.your.raspberry"
db:
image: generalmeow/rethinkdb:1.0-arm
container_name: openstf_db
volumes:
- "./rethinkdb_data:/data"
network_mode: host
adb:
image: mitchtech/arm-adb
privileged: true
container_name: adb
network_mode: host
networks:
default:
external:
name: "host"
- copy the docker-infra.service file from the systemd directory to /etc/systemd/system
$ sudo cp systemd/docker-infra.service /etc/systemd/system - modify it so that it corresponds to your directory:
vi systemd/docker-infra.service
HypriotOS/armv7: pirate@black-pearl in /DATA/openstf-arm7-docker
$ cat !$
cat systemd/docker-infra.service
[Unit]
Description=Docker infra
Requires=docker.service
After=docker.service
[Service]
Restart=always
ExecStart=/usr/local/bin/docker-compose -f /DATA/openstf-arm7-docker/docker-compose.yml up
ExecStop=/usr/local/bin/docker-compose -f /DATA/openstf-arm7-docker/docker-compose.yml stop
[Install]
WantedBy=default.target
- reload the daemons:
sudo systemctl daemon-reload - enable the service:
sudo systemctl enable docker-infra - start everything:
sudo systemctl start docker-infra
After everything is loaded, your server will be available on http://ip.of.your.raspberry:7100
and… Tadaam :
