Deployed 14deabc with MkDocs version: 1.6.1

learning-course/stage1/1C/exercise1/index.html

@@ -2820,12 +2820,21 @@ <h3 id="tube-plugs">Tube Plugs</h3>
 They can be used to connect plates to the open face of tubes or to connect tubes to each other without the use of a <abbr title="Reinforcement plate, usually made of aluminum, used to strengthen connections between two tubes.">gusset</abbr>.</p>
 <details class="example" open="open">
 <summary>Tube Plugs</summary>
+<div class="grid cards" markdown>
+<ul>
+<li>
+<p><center><a class="glightbox" href="/img/learning-course/stage1c/flat-intake/high-tide-tube-plugs.webp" data-type="image" data-width="90%" data-height="auto" data-desc-position="bottom"><img src="/img/learning-course/stage1c/flat-intake/high-tide-tube-plugs.webp" width="100%"></a></center></p>
+</li>
+<li>
+<p><center><a class="glightbox" href="/img/learning-course/stage1c/flat-intake/miso-tube-plug.webp" data-type="image" data-width="90%" data-height="auto" data-desc-position="bottom"><img src="/img/learning-course/stage1c/flat-intake/miso-tube-plug.webp" width="100%"></a></center></p>
+</li>
+</ul>
+</div>
 <p><figure>
-  <a class="glightbox" href="/img/learning-course/stage1c/flat-intake/high-tide-tube-plugs.webp" data-type="image" data-width="90%" data-height="auto" data-desc-position="bottom"><img align="left"  src="/img/learning-course/stage1c/flat-intake/high-tide-tube-plugs.webp" width="47%"></a><a class="glightbox" href="/img/learning-course/stage1c/flat-intake/miso-tube-plug.webp" data-type="image" data-width="90%" data-height="auto" data-desc-position="bottom"><img align="right" src="/img/learning-course/stage1c/flat-intake/miso-tube-plug.webp" width="47%"></a>
   <figcaption>Tube plugs can be used to create <abbr title="Reinforcement plate, usually made of aluminum, used to strengthen connections between two tubes.">gusset</abbr>-less tube to tube (left) and tube to plate (right) connections. (Photo Credits: FRC 4414, FRC 9442)</figcaption>
 </figure></p>
 </details>
-<p>This exercise also introduces you to the use of the the <a href="https://cad.onshape.com/documents/0f7d68295ff4dab57adcf92c/v/88fbfa19a2e2555d18599db4/e/bcf3052f00f1f9d3d95a89c7?jumpToIndex=1392&amp;showReturnToWorkspaceLink=true" target="_blank" title="Assembly Mirror FS Onshape Document">Assembly Mirror Featurescript</a> which is a useful tool to  help make your assembly more <abbr title="Designed in a way that uses relationships between steps to maintain design intent">parametric</abbr>. 
+<p>This exercise also introduces you to the use of the the <a href="https://cad.onshape.com/documents/0f7d68295ff4dab57adcf92c/v/88fbfa19a2e2555d18599db4/e/bcf3052f00f1f9d3d95a89c7?jumpToIndex=1392&amp;showReturnToWorkspaceLink=true" target="_blank" title="Assembly Mirror FS Onshape Document">Assembly Mirror Featurescript</a> which is a useful tool to  help make your assembly more <abbr title="Designed in a way that uses relationships between steps to maintain design intent">parametric</abbr>.
 Make sure to add this to your Featurescripts if you have not already.</p>
 <h3 id="part-studio-instructions">Part Studio Instructions</h3>
 <p><strong>Navigate to the "Exercise #1 Part Studio" tab</strong> in your copied document and <strong>follow the instructions in the slides</strong> to complete the part studio for this exercise.</p>
@@ -3203,7 +3212,7 @@ <h3 id="parametric-modeling"><abbr title="Designed in a way that uses relationsh
     <span class="md-icon" title="Last update">
       <svg xmlns="http://www.w3.org/2000/svg" viewBox="0 0 24 24"><path d="M21 13.1c-.1 0-.3.1-.4.2l-1 1 2.1 2.1 1-1c.2-.2.2-.6 0-.8l-1.3-1.3c-.1-.1-.2-.2-.4-.2m-1.9 1.8-6.1 6V23h2.1l6.1-6.1-2.1-2M12.5 7v5.2l4 2.4-1 1L11 13V7h1.5M11 21.9c-5.1-.5-9-4.8-9-9.9C2 6.5 6.5 2 12 2c5.3 0 9.6 4.1 10 9.3-.3-.1-.6-.2-1-.2s-.7.1-1 .2C19.6 7.2 16.2 4 12 4c-4.4 0-8 3.6-8 8 0 4.1 3.1 7.5 7.1 7.9l-.1.2v1.8Z"/></svg>
     </span>
-    <span class="git-revision-date-localized-plugin git-revision-date-localized-plugin-date">September 22, 2024</span>
+    <span class="git-revision-date-localized-plugin git-revision-date-localized-plugin-date">September 23, 2024</span>
   </span>
 
 

learning-course/stage1/1C/exercise2/index.html

@@ -2820,7 +2820,7 @@ <h3 id="live-and-dead-axle-rollers">Live and Dead Axle Rollers</h3>
 <details class="example" open="open">
 <summary>Live vs Dead Axle Rollers</summary>
 <p><figure>
-  <a class="glightbox" href="/img/learning-course/stage1c/dead-axle-rollers/dead-vs-live.webp" data-type="image" data-width="90%" data-height="auto" data-desc-position="bottom"><img src="/img/learning-course/stage1c/dead-axle-rollers/dead-vs-live.webp" style="width:80%"></a>
+  <a class="glightbox" href="/img/learning-course/stage1c/dead-axle-rollers/dead-vs-live.webp" data-type="image" data-width="90%" data-height="auto" data-desc-position="bottom"><img src="/img/learning-course/stage1c/dead-axle-rollers/dead-vs-live.webp" style="width:65%"></a>
   <figcaption>Section view of a dead axle (left) and live axle (right) roller. The dead axle roller sits on bearings and needs to be directly powered (in this case, through the integrated pulley). The live axle roller is powered from a pulley farther down the hex shaft.</figcaption>
 </figure></p>
 </details>

learning-course/stage1/1C/exercise3/index.html

@@ -2851,7 +2851,7 @@ <h3 id="3d-printed-pulleys">3D Printed Pulleys</h3>
 <details class="example" open="open">
 <summary>3D Printed Pulley Inserts</summary>
 <p><figure>
-  <a class="glightbox" href="/img/learning-course/stage1c/shooter/3dp-pulleys.webp" data-type="image" data-width="90%" data-height="auto" data-desc-position="bottom"><img src="/img/learning-course/stage1c/shooter/3dp-pulleys.webp" style="width:100%"></a>
+  <a class="glightbox" href="/img/learning-course/stage1c/shooter/3dp-pulleys.webp" data-type="image" data-width="90%" data-height="auto" data-desc-position="bottom"><img src="/img/learning-course/stage1c/shooter/3dp-pulleys.webp" style="width:80%"></a>
   <figcaption>3D printed pulleys with hex insert for hex shaft (left), SplineXS insert for Kraken motors (center), and pinion gear insert for NEO/CIM motors (right). </figcaption>
 </figure></p>
 </details>
@@ -2863,7 +2863,7 @@ <h3 id="nut-strips">Nut Strips</h3>
 <details class="example" open="open">
 <summary>Nut Strips</summary>
 <p><figure>
-  <a class="glightbox" href="/img/learning-course/stage1c/shooter/nut-strips-real.webp" data-type="image" data-width="90%" data-height="auto" data-desc-position="bottom"><img src="/img/learning-course/stage1c/shooter/nut-strips-real.webp" style="width:80%"></a>
+  <a class="glightbox" href="/img/learning-course/stage1c/shooter/nut-strips-real.webp" data-type="image" data-width="90%" data-height="auto" data-desc-position="bottom"><img src="/img/learning-course/stage1c/shooter/nut-strips-real.webp" style="width:65%"></a>
   <!-- <figcaption>Example of using a nut strip to connect two perpendicular plates (left) as well as a plate to a tube (right)</figcaption> -->
   <figcaption>Nut strips can be used to connect a plate to a tube or a plate to a perpendicular plate. (Photo Credits: FRC 4414)</figcaption>
 </figure></p>

learning-course/stage1/1C/exercise4/index.html

@@ -2820,8 +2820,17 @@ <h3 id="leveraging-cots-components">Leveraging <abbr title="Commercial Off the S
 This helps ensure your time is spent where it makes the most impact, rather than on re-inventing parts that are already readily available.</p>
 <details class="example" open="open">
 <summary>Exercise 4 <abbr title="Commercial Off the Shelf parts are anything you can buy from a vendor.">COTS</abbr> Components</summary>
+<div class="grid cards" markdown>
+<ul>
+<li>
+<p><center><a class="glightbox" href="/img/learning-course/stage1c/telescope/greyt.webp" data-type="image" data-width="90%" data-height="auto" data-desc-position="bottom"><img src="/img/learning-course/stage1c/telescope/greyt.webp" width="100%"></a></center></p>
+</li>
+<li>
+<p><center><a class="glightbox" href="/img/learning-course/stage1c/telescope/maxplanetary.webp" data-type="image" data-width="90%" data-height="auto" data-desc-position="bottom"><img src="/img/learning-course/stage1c/telescope/maxplanetary.webp" width="100%"></a></center></p>
+</li>
+</ul>
+</div>
 <p><figure>
-  <a class="glightbox" href="/img/learning-course/stage1c/telescope/greyt.webp" data-type="image" data-width="90%" data-height="auto" data-desc-position="bottom"><img align="left"  src="/img/learning-course/stage1c/telescope/greyt.webp" width="47%"></a><a class="glightbox" href="/img/learning-course/stage1c/telescope/maxplanetary.webp" data-type="image" data-width="90%" data-height="auto" data-desc-position="bottom"><img align="right" src="/img/learning-course/stage1c/telescope/maxplanetary.webp" width="47%"></a>
   <figcaption>The telescoping bearing blocks have complex geometry that would be difficult and time consuming to manufacture for most teams.
               The <abbr title="REV Robotics">REV</abbr> MAXPlanetary is an easy way to get a large gearbox reduction without the need for a custom gearbox. (Photo Credits: <abbr title="West Coast Products">WCP</abbr>, <abbr title="REV Robotics">REV</abbr>)</figcaption>
 </figure></p>
@@ -3071,7 +3080,7 @@ <h3 id="section-views">Section Views</h3>
     <span class="md-icon" title="Last update">
       <svg xmlns="http://www.w3.org/2000/svg" viewBox="0 0 24 24"><path d="M21 13.1c-.1 0-.3.1-.4.2l-1 1 2.1 2.1 1-1c.2-.2.2-.6 0-.8l-1.3-1.3c-.1-.1-.2-.2-.4-.2m-1.9 1.8-6.1 6V23h2.1l6.1-6.1-2.1-2M12.5 7v5.2l4 2.4-1 1L11 13V7h1.5M11 21.9c-5.1-.5-9-4.8-9-9.9C2 6.5 6.5 2 12 2c5.3 0 9.6 4.1 10 9.3-.3-.1-.6-.2-1-.2s-.7.1-1 .2C19.6 7.2 16.2 4 12 4c-4.4 0-8 3.6-8 8 0 4.1 3.1 7.5 7.1 7.9l-.1.2v1.8Z"/></svg>
     </span>
-    <span class="git-revision-date-localized-plugin git-revision-date-localized-plugin-date">September 22, 2024</span>
+    <span class="git-revision-date-localized-plugin git-revision-date-localized-plugin-date">September 23, 2024</span>
   </span>
 
 

learning-course/stage1/1C/exercise5/index.html

@@ -2934,7 +2934,7 @@ <h3 id="interference-detection">Interference Detection</h3>
 <p class="admonition-title">Interference Detection</p>
 <p>If an interference is detected with the Check Interference tool, it will highlight the intersected volumes in red.
 <figure>
-  <a class="glightbox" href="/img/learning-course/stage1c/flipped-gb/interference.webp" data-type="image" data-width="90%" data-height="auto" data-desc-position="bottom"><img src="/img/learning-course/stage1c/flipped-gb/interference.webp" style="width:100%"></a>
+  <a class="glightbox" href="/img/learning-course/stage1c/flipped-gb/interference.webp" data-type="image" data-width="90%" data-height="auto" data-desc-position="bottom"><img src="/img/learning-course/stage1c/flipped-gb/interference.webp" style="width:80%"></a>
   <figcaption>Interference between a motor and plate detected by the Check Interference tool.</figcaption>
 </figure></p>
 </div>
@@ -2961,7 +2961,7 @@ <h3 id="interference-detection">Interference Detection</h3>
     <span class="md-icon" title="Last update">
       <svg xmlns="http://www.w3.org/2000/svg" viewBox="0 0 24 24"><path d="M21 13.1c-.1 0-.3.1-.4.2l-1 1 2.1 2.1 1-1c.2-.2.2-.6 0-.8l-1.3-1.3c-.1-.1-.2-.2-.4-.2m-1.9 1.8-6.1 6V23h2.1l6.1-6.1-2.1-2M12.5 7v5.2l4 2.4-1 1L11 13V7h1.5M11 21.9c-5.1-.5-9-4.8-9-9.9C2 6.5 6.5 2 12 2c5.3 0 9.6 4.1 10 9.3-.3-.1-.6-.2-1-.2s-.7.1-1 .2C19.6 7.2 16.2 4 12 4c-4.4 0-8 3.6-8 8 0 4.1 3.1 7.5 7.1 7.9l-.1.2v1.8Z"/></svg>
     </span>
-    <span class="git-revision-date-localized-plugin git-revision-date-localized-plugin-date">September 21, 2024</span>
+    <span class="git-revision-date-localized-plugin git-revision-date-localized-plugin-date">September 23, 2024</span>
   </span>
 
 

learning-course/stage1/1C/exercise7/index.html

@@ -2799,7 +2799,7 @@ <h3 id="3d-printing-to-reduce-part-count">3D Printing to Reduce Part Count</h3>
 <details class="example" open="open">
 <summary>3D Printed Spacer Block</summary>
 <p><figure>
-  <a class="glightbox" href="/img/learning-course/stage1c/vertical-rollers/3dp-spacer.webp" data-type="image" data-width="90%" data-height="auto" data-desc-position="bottom"><img src="/img/learning-course/stage1c/vertical-rollers/3dp-spacer.webp" width="80%"></a>
+  <a class="glightbox" href="/img/learning-course/stage1c/vertical-rollers/3dp-spacer.webp" data-type="image" data-width="90%" data-height="auto" data-desc-position="bottom"><img src="/img/learning-course/stage1c/vertical-rollers/3dp-spacer.webp" width="65%"></a>
   <figcaption>Multiple spacers can be combined into single 3D printed block to reduce part count. </figcaption>
 </figure></p>
 </details>
@@ -2992,7 +2992,7 @@ <h3 id="assembly-instructions">Assembly Instructions</h3>
     <span class="md-icon" title="Last update">
       <svg xmlns="http://www.w3.org/2000/svg" viewBox="0 0 24 24"><path d="M21 13.1c-.1 0-.3.1-.4.2l-1 1 2.1 2.1 1-1c.2-.2.2-.6 0-.8l-1.3-1.3c-.1-.1-.2-.2-.4-.2m-1.9 1.8-6.1 6V23h2.1l6.1-6.1-2.1-2M12.5 7v5.2l4 2.4-1 1L11 13V7h1.5M11 21.9c-5.1-.5-9-4.8-9-9.9C2 6.5 6.5 2 12 2c5.3 0 9.6 4.1 10 9.3-.3-.1-.6-.2-1-.2s-.7.1-1 .2C19.6 7.2 16.2 4 12 4c-4.4 0-8 3.6-8 8 0 4.1 3.1 7.5 7.1 7.9l-.1.2v1.8Z"/></svg>
     </span>
-    <span class="git-revision-date-localized-plugin git-revision-date-localized-plugin-date">September 22, 2024</span>
+    <span class="git-revision-date-localized-plugin git-revision-date-localized-plugin-date">September 23, 2024</span>
   </span>
 
 

learning-course/stage1/1C/exercise8/index.html

@@ -2801,7 +2801,7 @@ <h3 id="crush-blocks">Crush Blocks</h3>
 <details class="example" open="open">
 <summary>Crush Blocks and Crush Plates</summary>
 <p><figure>
-  <a class="glightbox" href="/img/learning-course/stage1c/index-centering/crush-blocks.webp" data-type="image" data-width="90%" data-height="auto" data-desc-position="bottom"><img src="/img/learning-course/stage1c/index-centering/crush-blocks.webp" width="80%"></a>
+  <a class="glightbox" href="/img/learning-course/stage1c/index-centering/crush-blocks.webp" data-type="image" data-width="90%" data-height="auto" data-desc-position="bottom"><img src="/img/learning-course/stage1c/index-centering/crush-blocks.webp" width="65%"></a>
   <figcaption>A 3D printed crush block (left) and crush plate (right). Crush plates tend to work well for the middle of the tubes where it may be difficult to insert a crush block.</figcaption>
 </figure></p>
 </details>
@@ -3014,7 +3014,7 @@ <h3 id="assembly-instructions">Assembly Instructions</h3>
     <span class="md-icon" title="Last update">
       <svg xmlns="http://www.w3.org/2000/svg" viewBox="0 0 24 24"><path d="M21 13.1c-.1 0-.3.1-.4.2l-1 1 2.1 2.1 1-1c.2-.2.2-.6 0-.8l-1.3-1.3c-.1-.1-.2-.2-.4-.2m-1.9 1.8-6.1 6V23h2.1l6.1-6.1-2.1-2M12.5 7v5.2l4 2.4-1 1L11 13V7h1.5M11 21.9c-5.1-.5-9-4.8-9-9.9C2 6.5 6.5 2 12 2c5.3 0 9.6 4.1 10 9.3-.3-.1-.6-.2-1-.2s-.7.1-1 .2C19.6 7.2 16.2 4 12 4c-4.4 0-8 3.6-8 8 0 4.1 3.1 7.5 7.1 7.9l-.1.2v1.8Z"/></svg>
     </span>
-    <span class="git-revision-date-localized-plugin git-revision-date-localized-plugin-date">September 22, 2024</span>
+    <span class="git-revision-date-localized-plugin git-revision-date-localized-plugin-date">September 23, 2024</span>
   </span>