Skip to content

flyfisher604/mpcnc_post_processor

 
 

Folders and files

NameName
Last commit message
Last commit date

Latest commit

 
 
 
 
 
 
 
 
 
 
 

Repository files navigation

Fusion 360 CAM posts processor for MPCNC

This is modified fork of https://github.com/guffy1234/mpcnc_posts_processor that was originally forked https://github.com/martindb/mpcnc_posts_processor.

CAM posts processor for use with Fusion 360 and MPCNC.

Supported firmware:

  • Marlin 2.0
  • Repetier firmware 1.0.3 (not tested. gcode is same as for Marlin)
  • GRBL 1.1
  • RepRap firmware (Duet3d)

Installation:

  • The post processor consists of a single file, mpcnc.cps.
  • It can be simply installed by selecting Manage->Post Library from the Fusion 360 menubar; alternatively the mpcnc.cps can be copied into a directory and selecting each time prior to a post operation. If there is an existing mpcnc.cps installed select it prior to installing and use the trash can icon to delete it
  • The desired post processor can be selected during a post using the Setup button and selecting Use Personal Post Library
  • Use the Job: CNC Firmware property to select between Marlin 2.x, Grbl 1.1 and RepRap firmware

Some design points:

  • Setup operation types: Milling, Water/Laser/Plasma

  • Support mm and Inches units (but all properties MUST be set in MM)

  • Rapids movements use two G0 moves. The first moves Z and the second moves XY. Moves are seperate to allow retraction from the work surface prior to horizontal travel. Moves use independent travel speeds for Z and XY.

  • Arcs support on XY plane (Marlin/Repetier/RepRap) or all panes (Grbl)

  • Tested with LCD display and SD card (built in tool change require printing from SD and LCD to restart)

  • Support for 3 different laser power using "cutting modes" (through, etch, vaporize)

  • Support 2 coolant channels. You may attach relays to control external devices - as example air jet valve.

  • Customizable level of verbosity of comments

  • Support line numbers

  • Support GRBL laser mode (note: you probably have to enabled laser mode $32=1)

    screenshot

Properties

WARNING: If you are using the Fusion 360 for Personal Use license, formally know as the Fusion 360 Hobbyist license, please respect the limitations of that license. To remain compliant with that license set your [Feed: Travel Speed X/Y] and [Feed: Travel Speed Z] no faster then your machine's maximum cut feedrate (see Group 2 Properties).

Fusion 360 for Personal Use restricts all moves not to exceed the maximum cut speed. This has been implemented not by reducing the speed of G0s but by changing all G0 (moves) to G1 (cut) commands. The side effect of this was to unintentionally introduce situations where tool dragging and/or work piece collisions occur, general at the start of jobs or after tool changes.

You can choose to resolve these issues by enabling the selective mapping of G1s->G0s (see Group 3 Properties). Theses issues are resolved as the post processor implements G0 moves by doing first a move in Z and then a move in X,Y while a G1 cuts travel in X,Y,Z at the same time.

Group 1: Job Properties

Use these properties to control overall aspects of the job.

Title Description Default
Job: CNC Firmware Dialect of GCode to create Marlin 2.x
Job: Job: Zero Starting Location (G92) On start set the current location as 0,0,0 (G92). true
Job: Manual Spindle On/Off Enable to manually turn spindle motor on/off. Post processor will issue additional pauses for TURN ON/TURN OFF the motor. true
Job: Comment Level Controls a increasing level of comments to be included: Off, Important, Info, Debug Info
Job: Use Arcs Use G2/G3 g-codes for circular movements. true
Job: Enable Line #s Show sequence numbers. false
Job: First Line # First sequence number. 1
Job: Line # Increment Sequence number increment. 10
Job: Include Whitespace Includes whitespace seperation between text. true
Job: At end go to 0,0 Go to X0 Y0 at gcode end, Z remains unchanged. true

Group 2: Travel Speed and Feedrate Scaling Properties

Use these properties to set the speed used for G0 Rapids and to scale the feedrate used for G1 cuts.

[Feed: Travel Speed X/Y] and [Feed: Travel Speed Z] are always used for G0 Rapids.

Scaling of the G1 cut feedrates will only occur if [Feed:Scaled Feedrate] is true.

Scaling ensures that no G1 cut exceeds the speed capablities of the X, Y, or Z axes. The cut's toolpath feedrate is projected onto the X, Y and Z axes. In turn each axis is tested to see if its cut speed is within the limits of that axis. If not, then all axes feedrates are scaled proportionatly to bring it within limits. This is repeated for all axes. The three axis feedrates are then merged to create a new toolpath feedrate which is then limited to ensure it doesn't exceed [Feed: Max Toolpath Speed].

Note: Because scaling considered 3 dimensional movement a resulting toolpath's feedrate may be greater then one or all of the X, Y or Z limits. For example, a small movement in Z compared to a much larger movement in XY may result in a feedrate that appears to exceed the capability of Z but in reality since Z is moving a much smaller distance for the same time period its actual feedrate is within the established limits.

Title Description Default
Feed: Travel Speed X/Y High speed for travel movements X & Y (mm/min). 2500 mm/min
Feed: Travel Speed Z High speed for travel movements Z (mm/min). 300 mm/min
Feed: Enforce Feedrate Forces the Fxxx to be include even if hasn't changed, useful for Marlin. true
Feed: Scaled Feedrate Scale feedrate based on X, Y, Z axis maximums. false
Feed: Max Cut Speed X or Y Maximum X or Y axis cut speed (mm/min). 900 mm/min
Feed: Max Cut Speed Z Maximum Z axis cut speed (mm/min). 180 mm/min
Feed: Max Toolpath Speed Maximum scaled feedrate for toolpath (mm/min). 1000 mm/min

Group 3: Map G1->G0 Properties

Allows G1 cuts to be converted to G0 Rapid movements in specific cases:

If [Map: First G1 -> G0 Rapid] is true the post processor resolves the lost initial positioning movement at the beginning of a cut toolpath. This problem is often identified in forums as the tool being initially dragged across the work surface.

If [Map: G1s -> G0s] is true then allows G1 XY cut movements (i.e. no change in Z) that occur at a height greater or equal to [Map: Safe Z to Rapid] to be converted to G0 Rapids. Note: this assumes that any Z above [Map: Safe Z to Rapid] is a movement in the air and clear of obstacles. Can be defined as a number or one of F360's planes (Feed, Retract or Clearance).

Map: Safe Z for Rapids may be defined as:

  • As a constant numeric value - safe Z will then always be this value for all sections, or
  • As a reference to a F360 Height - safe Z will then follow the Height defined within the operation's Height tab. Allowable Heights are: Feed, Retract, or Clearance. The Height must be followed by a ":" and then a numeric value. The value will be used if Height is not defined for a section.

If [Map: Allow Rapid Z] is true then G1 Z cut movements that either move straight up and end above [Map: Safe Z to Rapid], or straight down with the start and end positions both above [Map: Safe Z to Rapid] are included. Only occurs if [Map: G1s -> G0s] is also true.

Title Description Default Format
Map: First G1 -> G0 Rapid Converts the first G1 of a cut to G0 Rapid false
Map: G1s -> G0s Allow G1 cuts to be converted to Rapid G0 moves when safe and appropriate. false
Map: Safe Z for Rapids A G1 cut's Z must be >= to this to be mapped to a Rapid G0. Can be two formats (1) a number which will be used for all sections, or (2) a reference to F360's Height followed by a default if Height is not available. Retract:15 (use the Retract height and if not available 15) <number> or <F360 Height>:<number>; e.g. 10 or Retract:7 or Feed:5
Map: Allow Rapid Z Include the mapping of vertical cuts if they are safe. false

Group 4: Tool change Properties

Title Description Default
Tool Change: Enable Include tool change code when tool changes (bultin tool change requires LCD display false
Tool Change: X X position for built-in tool change 0
Tool Change: Y Y position for built-in tool change 0
Tool Change: Z Z position for built-in tool change 40
Tool Change: Disable Z stepper Disable Z stepper after reaching tool change location false

Group 5: Z Probe Properties

Title Description Default
Probe: On job start Execute probe gcode on job start false
Probe: After Tool Change Z probe after tool change false
Probe: Plate thickness Plate thickness 0.8
Probe: Use Home Z (G28) Probe with G28 (Yes) or G38 (No) true
Probe: G38 target G38 Probing's furthest Z position -10
Probe: G38 speed G38 Probing's speed 30

Group 6: Laser/Plasma Properties

Fusion 360 defines four levels of Through cut, currently these all map to power level "On - Through".

The firmware selected in the parameter [Job: CNC Firmware] determines if the Grbl or Marlin/Reprap laser parameters are used.

Fusion 360 does not use a coolant when using its jet tools (waterjet/laser/plasma). When using a laser it may be desirable to use air or some other device you have connected to the coolant channels. The [Laser: Coolant] can be used to force a coolant to be used for the laser operations (see coolant parameter on details for configuring the coolant channels).

Title Description Default Values
Laser: On - Vaporize Persent of power to turn on the laser/plasma cutter in vaporize mode 100
Laser: On - Through Persent of power to turn on the laser/plasma cutter in through mode 80
Laser: On - Etch Persent of power to turn on the laser/plasma cutter in etch mode 40
Laser: Marlin/Reprap Mode Marlin/Reprap mode of the laser/plasma cutter Fan - M106 S{PWM}/M107 "Fan - M106 S{PWM}/M107", "Spindle - M3 O{PWM}/M5", "Pin - M42 P{pin} S{PWM}"
Laser: Marlin M42 Pin Marlin custom pin number for the laser/plasma cutter 4
Laser: GRBL Mode GRBL mode of the laser/plasma cutter M4 S{PWM}/M5 dynamic power "M4 S{PWM}/M5 dynamic power", "M3 S{PWM}/M5 static power"
Laser: Coolant Force a coolant to be used Off off, flood, mist, throughTool, air, airThroughTool, suction, floodMist, floodThroughTool

Group 7: Override Behaviour by External File Properties

Title Description Default
Extern: Start File File with custom Gcode for header/start (in nc folder)
Extern: Stop File File with custom Gcode for footer/end (in nc folder)
Extern: Tool File File with custom Gcode for tool change (in nc folder)
Extern: Probe File File with custom Gcode for tool probe (in nc folder)

Group 7: Coolant Control Pin Properties

Coolant has two channels, A and B. Each channel can be configured to be off or set to 1 of the 8 coolant modes that Fusion 360 allows on operation. If a tool's collant requirements match a channel's setting then that channel is enabled. A warning is generated if a tool askes for coolant and there is not a channel that matches.

If a channel matches the coolant requested the Channel becomes enabled. When a channel is enabled the post processor will include the text associated with the corresponding property [Coolant <A or B> Enable]. Note, Marlin and Grbl values are included as options, you must select based on your actual configuration. The firmware selected in property [Job: CNC Firmware] will not override your selection.

If a channel needs to be Disabled because it no longer matchs the coolant requested then the channel is physically disabled by the post processor by including the text associated with the corresponding property [Coolant <A or B> Disable]. Note, Marlin and Grbl values are included as options, you must select based on your actual configuration. The firmware selected in the propery [Job: CNC Firmware] will not override your selection.

For coolant requests, like "Flood and Mist" or "Flood and Through Tool" you may want to enable one or two channels dependent on if your hardware uses one connections to enable both or a seperate connection for each. Two channels may be enabled by placing the same coolant code in both. For example, setting both channels to "Flood and Mist" will result in enabling both channel A and channel B when the tool requests "Flood and Mist". Correspondingly channels A's enable value will be output (to enable flooding) and channel B's enable value will be output (to enable Mist).

Four custom coolant text strings can be defined for both Channel A and B's on and off values. Use these if the predefine values do not match your hardware. To enable, set the corresponding coolant channel to 'Use custom'.

Title Description Default Values
Coolant: A Mode Enable channel A when tool is set this coolant off off, flood, mist, throughTool, air, airThroughTool, suction, floodMist, floodThroughTool
Coolant: B Mode Enable channel B when tool is set this coolant off off, flood, mist, throughTool, air, airThroughTool, suction, floodMist, floodThroughTool
Coolant: A Enable GCode to turn On coolant channel A Mrln: M42 P6 S255 "Mrln: M42 P6 S255", , Mrln: M42 P11 S255", "Grbl: M7 (mist)", "Grbl: M8 (flood)", "Use custom"
Coolant: A Disable GCode to turn Off coolant channel A Mrln: M42 P6 S0 "Mrln: M42 P6 S0", "Mrln: M42 P11 S0", "Grbl: M9 (off)", "Use custom"
Coolant: B Enable GCode to turn On coolant channel B Mrln: M42 P11 S255 "Mrln: M42 P11 S255", "Mrln: M42 P6 S255", "Grbl: M7 (mist)", "Grbl: M8 (flood)", "Use custom"
Coolant: B Disable GCode to turn Off coolant channel B Mrln: M42 P11 S0 "Mrln: M42 P11 S0", "Mrln: M42 P6 S0", "Grbl: M9 (off)", "Use custom"
Coolant: Custom A Enable Custom GCode to turn On coolant channel A empty
Coolant: Custom A Disable Custom GCode to turn Off coolant channel A empty
Coolant: Custom B Enable Custom GCode to turn On coolant channel B empty
Coolant: Custom B Disable Custom GCode to turn Off coolant channel B empty

Group 9: Duet Properties

Title Description Default
Duet: Milling mode GCode command to setup Duet3d milling mode M453 P2 I0 R30000 F200
Duet: Laser mode GCode command to setup Duet3d laser mode M452 P2 I0 R255 F200

Sample of issued code blocks

Gcode of milling with manually control spindle

To be updated

Resources

Marlin G-codes

PostProcessor Class Reference

Post Processor Training Guide (PDF document)

Enhancements to the post processor property definitions

Dumper PostProcessor

Library of exist post processors

Post processors forum

How to set up a 4/5 axis machine configuration

Beginners Guide to Editing Post Processors in Fusion 360! FF121 (Youtube video)

About

Marlin/MPCNC posts processor for Fusion 360

Resources

License

Stars

Watchers

Forks

Packages

No packages published

Languages

  • Component Pascal 88.4%
  • G-code 11.6%