Skip to content
Jack Betteridge edited this page Oct 17, 2024 · 5 revisions

Isambard is no more!

The Isambard 2 service was retired on 30th September 2024. These notes are only for reference.

We have only tried installing on the XCI (ARM/ThunderX2/TX2) system, not the MACS, A64FX or Phase3 portions of the machine.

Prerequisites

You should familiarise yourself with as much of Spack's functionality as possible. To achieve the same flexibility as we have on desktop installs the Firedrake Spack install leverages a lot of Spack's features. More information about Spack can be found on their website.

Spack

Environment

  • The following clones the Spack repo, loads modules to setup the environment and activates Spack.
git clone -c feature.manyFiles=true [email protected]:spack/spack.git

module purge
module load Base-opts
module load PrgEnv-gnu
module load pmi-lib
module load cray-python/3.8.5.1
module load cray-mpich

. spack/share/spack/setup-env.sh

Configuration

  1. Populate $SPACK_USER_CONFIG_PATH/cray/compilers.yaml with
$SPACK_USER_CONFIG_PATH/cray/compilers.yaml
compilers:
- compiler:
    spec: [email protected]
    paths:
      cc: cc
      cxx: CC
      f77: ftn
      fc: ftn
    flags: {}
    operating_system: cnl7
    target: any
    modules:
    - PrgEnv-cray
    - cce/11.0.4
    environment: {}
    extra_rpaths: []
- compiler:
    spec: [email protected]
    paths:
      cc: cc
      cxx: CC
      f77: ftn
      fc: ftn
    flags: {}
    operating_system: cnl7
    target: any
    modules:
    - PrgEnv-gnu
    - gcc/9.3.0
    environment: {}
    extra_rpaths: []
  1. Populate $SPACK_USER_CONFIG_PATH/packages.yaml with
$SPACK_USER_CONFIG_PATH/packages.yaml
packages:
  all:
    providers:
      mpi: [cray-mpich]
  pkg-config:
    externals:
    - spec: [email protected]
      prefix: /usr
    buildable: False
  pkgconf:
    externals:
    - spec: [email protected]
      prefix: /usr
    buildable: False
  cray-mpich:
    externals:
    - spec: [email protected]%[email protected]
      modules:
      - PrgEnv-gnu
      - gcc/9.3.0
      - cray-mpich/7.7.17
    - spec: [email protected]%[email protected]
      modules:
      - PrgEnv-cray
      - cce/11.0.4
      - cray-mpich/7.7.17
    buildable: False
  cray-libsci:
    externals:
      - spec: [email protected]
        modules:
        - cray-libsci/20.09.1
      - spec: [email protected]
        modules:
        - cray-libsci/19.06.1
    buildable: False
  python:
    externals:
      - spec: [email protected]
        modules:
        - cray-python/3.8.5.1
      - spec: [email protected]
        modules:
        - cray-python/3.7.3.2
    buildable: False
  1. Esure $SPACK_USER_CONFIG_PATH/upstreams.yaml does not exist. Upstream (system level installed Spack packages) for Isambard cause the Cray tools (compiler wrappers) to break.

Firedrake

  1. Clone the repo:

    git clone https://github.com/firedrakeproject/firedrake-spack.git
    # or
    git clone [email protected]:firedrakeproject/firedrake-spack.git
  2. Add the repository to spack spack repo add <repo directory>

  3. Create an spack environment spack env create -d ./firedrake

  4. Activate that environment spack env activate -p ./firedrake

  5. To avoid a bunch of errors add a whole bunch of packages to the development package list:

    spack develop py-firedrake@develop
    spack develop libsupermesh@develop
    spack develop petsc@develop
    spack develop chaco@petsc
    spack develop py-fiat@develop
    spack develop py-finat@develop
    spack develop py-islpy@develop
    spack develop py-petsc4py@develop
    spack develop py-pyadjoint@develop
    spack develop py-pyop2@develop
    spack develop py-coffee@develop
    spack develop py-loopy@develop
    spack develop py-cgen@develop
    
    spack develop py-codepy@develop
    spack develop py-genpy@develop
    spack develop py-tsfc@develop
    spack develop py-ufl@develop
  6. Add Firedrake:

    spack add py-firedrake@develop \
        %[email protected] \
        ^[email protected] \
        ^[email protected]%[email protected] \
        ^[email protected] \
        ^firedrake.petsc@develop+fftw cflags=\"-O3 -march=native -mtune=native\" cxxflags=\"-O3 -march=native -mtune=native\" fflags=\"-O3 -march=native -mtune=native -ffree-line-length-512\"
  7. Add to $SPACK_ENV/spack.yaml:

    spack:
      packages:
        all:
          compiler: [[email protected]]
          providers:
            mpi: [cray-mpich]
            blas: [cray-libsci]
            lapack: [cray-libsci]
            scalapack: [cray-libsci]
        netlib-scalapack:
          externals:
            # Pretend cray-libsci is netlib-scalapack
            - spec: [email protected]
              modules:
              - cray-libsci/20.09.1
          buildable: False
  8. Concretize (and log) spack concretize -f 2>&1 | tee $SPACK_ENV/conc.log

    • Splitting the concretize and install steps into 2 distinct parts allows you to review what is being installed before the lengthy installation process begins.
  9. Install (and log) spack install --fail-fast 2>&1 | tee $SPACK_ENV/spack-firedrake-install.log

Testing

Testing must be run on a compute node. An interactive session can be started using

qsub -I -q arm-dev -l walltime=00:10:00

Alternatively submit a jobscript, see additional notes.

  1. Test you can import Firedrake by running aprun -n 1 python -c "from firedrake import *". You must run via aprun to make sure the MPI modules are found.
    • If this fails, before trying anything else, deactivate the environment with spack env deactivate and reactivate with spack env activate -p ./firedrake (as above) and try running python -c "from firedrake import *" again. This appears to be a shortcoming of spack.
  2. Run the basic functionality tests. Before running you will need to set a few pyop2 variables:
    unset PYOP2_LD
    export PYOP2_CC=`which cc`
    export PYOP2_CXX=`which CC`
    export PYOP2_CFLAGS="-I${CRAY_MPICH_DIR}/include/"
    export PYOP2_LDFLAGS='-shared'
    Run the tests with:
    cd $SPACK_ENV/py-firedrake
    pytest tests/regression/ -m "not parallel" -k "poisson_strong or stokes_mini or dg_advection"
    • When running the environment on the compute nodes the variable $HOME needs to be set to something like /work/_projectcode_/_projectcode_/_username_ or /tmp as many dependencies expect to find configuration in $HOME.
    • We don't run parallel tests due to an issue with the current parallel pytest hook, this is in the process of being fixed.
  3. Run the full test suite:
    cd $SPACK_ENV/src/firedrake
    pytest tests -m "not parallel"

Additional notes

This page is based off installation notes available here.

Other potential problems you may run into:

  • At the spack install step, Spack may complain about a missing dependency gnuconfig for the libffi package. It will tell you to add depends_on('gnuconfig', type='build', when='@3.4.2') to the package definition (exact version may not be 3.4.2). You can edit the package file with spack edit libffi. This opens the package file located in spack/var/spack/repos/builtin/packages/libffi/package.py with $EDITOR. You can see how to add dependencies from the example in the Spack documentation.
  • This guide assumes you are using your own Spack installation. After running . spack/share/spack/setup-env.sh you can check you are using the correct Spack installation with which spack.

Isambard maintains an installation of Spack, but it is not up to date and does not contain many of the fixes required to install Firedrake. Documentation is available on the Isambard spack docs page.

Home

Building locally
Tips

Install Frequently Asked Questions

Running on HPC

Users

Developers Notes

Minutes and agenda of Firedrake meetings


Policies and procedures

Gravity wave scaling

Merge Complex Sprint

Reading Group

Firedrake 2021 Planning Meetings
Clone this wiki locally