The Python Imaging Library
$Id$

Release 1.2a0 (January 8, 2011)

====================================================================
The Python Imaging Library 1.2a0
====================================================================

Contents
--------

+ Introduction
+ Support
+ Software License
+ Build instructions (all platforms)
  - Additional notes for Mac OS X
  - Additional notes for Windows

--------------------------------------------------------------------
Introduction
--------------------------------------------------------------------

The Python Imaging Library (PIL) adds image processing capabilities
to your Python environment.  This library provides extensive file
format support, an efficient internal representation, and powerful
image processing capabilities.

This source kit has been built and tested with Python 2.2 and newer,
on Windows, Mac OS X, and major Unix platforms.  The kit also builds
under Python 3.1 and 3.2, but doesn't provide much functionality yet.

The main distribution site for this software is:

        http://www.pythonware.com/products/pil/

That site also contains information about free and commercial support
options, PIL add-ons, answers to frequently asked questions, and more.


Development versions (alphas, betas) are available here:

        http://effbot.org/downloads/


The full PIL handbook is not included in this distribution; to get the
latest version, check:

        http://www.pythonware.com/library/
        http://effbot.org/books/imagingbook/ (drafts)

However, some reference material is available in the Docs directory.


For installation and licensing details, see below.


--------------------------------------------------------------------
Support
--------------------------------------------------------------------

For support and general questions on the Python Imaging Library, send
e-mail to the Image SIG mailing list:

        [email protected]

You can join the Image SIG by sending a mail to:

        [email protected]

Put "subscribe" in the message body to automatically subscribe to the
list, or "help" to get additional information.  Alternatively, you can
send your questions to the Python mailing list, [email protected],
or post them to the newsgroup comp.lang.python.  DO NOT SEND SUPPORT
QUESTIONS TO PYTHONWARE ADDRESSES.


--------------------------------------------------------------------
Software License
--------------------------------------------------------------------

The Python Imaging Library is

Copyright (c) 1997-2011 by Secret Labs AB
Copyright (c) 1995-2011 by Fredrik Lundh

By obtaining, using, and/or copying this software and/or its
associated documentation, you agree that you have read, understood,
and will comply with the following terms and conditions:

Permission to use, copy, modify, and distribute this software and its
associated documentation for any purpose and without fee is hereby
granted, provided that the above copyright notice appears in all
copies, and that both that copyright notice and this permission notice
appear in supporting documentation, and that the name of Secret Labs
AB or the author not be used in advertising or publicity pertaining to
distribution of the software without specific, written prior
permission.

SECRET LABS AB AND THE AUTHOR DISCLAIMS ALL WARRANTIES WITH REGARD TO
THIS SOFTWARE, INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND
FITNESS.  IN NO EVENT SHALL SECRET LABS AB OR THE AUTHOR BE LIABLE FOR
ANY SPECIAL, INDIRECT OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT
OF OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.


--------------------------------------------------------------------
Build instructions (all platforms)
--------------------------------------------------------------------

For a list of changes in this release, see the CHANGES document.

0. If you're in a hurry, try this:

        $ tar xvfz PIL-1.2a0.tar.gz
        $ cd PIL-1.2a0
        $ python setup.py install

   If you prefer to know what you're doing, read on.


1. Prerequisites.

   If you need any of the features described below, make sure you
   have the necessary libraries before building PIL.

   feature              library
   -----------------------------------------------------------------
   JPEG support         libjpeg (6b or 8b)

                        http://www.ijg.org
                        http://www.ijg.org/files/jpegsrc.v6b.tar.gz
                        http://www.ijg.org/files/jpegsrc.v8b.tar.gz
                        ftp://ftp.uu.net/graphics/jpeg/

   PNG support          zlib (1.2.3 or later is recommended)

                        http://www.gzip.org/zlib/

   OpenType/TrueType    freetype2 (2.3.9 or later is recommended)
   support              
                        http://www.freetype.org
                        http://freetype.sourceforge.net  

   CMS support          littleCMS (1.1.5 or later is recommended)
   support              
                        http://www.littlecms.com/

   If you have a recent Linux version, the libraries provided with the
   operating system usually work just fine.  If some library is
   missing, installing a prebuilt version (jpeg-devel, zlib-devel,
   etc) is usually easier than building from source.  For example, for
   Ubuntu 9.10 (karmic), you can install the following libraries:

       sudo apt-get install libjpeg62-dev
       sudo apt-get install zlib1g-dev
       sudo apt-get install libfreetype6-dev
       sudo apt-get install liblcms1-dev

   For Tkinter development, you also need:

       sudo apt-get install python-tk
       sudo apt-get install tk-dev

   If you're using Mac OS X, you can use the 'fink' tool to install
   missing libraries (also see the Mac OS X section below).

   Similar tools are available for many other platforms.
   

2. If you didn't build Python from sources, make sure you have
   Python's build support files on your machine.  If you've down-
   loaded a prebuilt package (e.g. a Linux RPM), you probably
   need additional developer packages.  Look for packages named
   "python-dev", "python-devel", or similar.  For example, for
   Ubuntu 9.10 (karmic), use the following command:

       sudo apt-get install python-dev


3. When you have everything you need, unpack the PIL distribution
   (the file PIL-1.2a0.tar.gz) in a suitable work directory:

        $ tar xvfz PIL-1.2a0.tar.gz

   Or if you're on an old Unix platform:

        $ gunzip PIL-1.2a0.tar.gz
        $ tar xvf PIL-1.2a0.tar


4. Build the library.  We recommend that you do an in-place build,
   and run the self test before installing.

        $ cd PIL-1.2a0
        $ python setup.py build_ext -i
        $ python selftest.py

   During the build process, the setup.py script will display a
   summary report that lists what external components it found.
   The self test will display a similar report, with what external
   components the tests found in the actual build files:

        ----------------------------------------------------------------
        PIL 1.2a0 SETUP SUMMARY
        ----------------------------------------------------------------
        *** TKINTER support not available (Tcl/Tk 8.5 libraries needed)
        --- JPEG support available
        --- ZLIB (PNG/ZIP) support available
        --- FREETYPE support available
        ----------------------------------------------------------------

   Make sure that the optional components you need are included.

   If the build script won't find a given component, you can edit the
   setup.py file and set the appropriate ROOT variable.  For details,
   see instructions in the file.

   If the build script finds the component, but the tests cannot
   identify it, try rebuilding *all* modules:

        $ python setup.py clean
        $ python setup.py build_ext -i


5. If the setup.py and selftest.py commands finish without any
   errors, you're ready to install the library:

        $ python setup.py install

   (depending on how Python has been installed on your machine, you
   might have to use the 'sudo' command to run 'install', or log in
   as the root user first.)


--------------------------------------------------------------------
Additional notes for Mac OS X
--------------------------------------------------------------------

On Mac OS X you will usually install additional software such as
libjpeg or freetype with the "fink" tool, and then it ends up in
"/sw".  If you have installed the libraries elsewhere, you may have
to tweak the "setup.py" file before building.


--------------------------------------------------------------------
Additional notes for Windows
--------------------------------------------------------------------

On Windows, you need to tweak the ROOT settings in the "setup.py"
file, to make it find the external libraries.  See comments in the
file for details.

Make sure to build PIL and the external libraries with the same
runtime linking options as was used for the Python interpreter
(usually /MD, under Visual Studio).


Note that most Python distributions for Windows include libraries
compiled for Microsoft Visual Studio.  You can get the free Express
edition of Visual Studio from:

    http://www.microsoft.com/Express/

To build extensions using other tool chains, see the "Using
non-Microsoft compilers on Windows" section in the distutils handbook:

    http://www.python.org/doc/current/inst/non-ms-compilers.html

For additional information on how to build extensions using the
popular MinGW compiler, see:

    http://mingw.org (compiler)
    http://sebsauvage.net/python/mingw.html (build instructions)
    http://sourceforge.net/projects/gnuwin32 (prebuilt libraries)