Convert top-level Makefile to be generated by automake.

"dist" target now includes m4 directory. Updated "libcheck"
target to look at dynamic libraries instead of static.

ChangeLog

@@ -1,3 +1,11 @@
+2009-01-16 Chris Bagwell <cbagwell-guest at users.alioth.debian.org>
+	* .cvsignore, Makefile.in, aclocal.m4, config.sub, configure,
+	configure.in, backend/cvsignore, include/Makefile.in,
+	include/sane/config.h.in, INSTALL, Makefile.am, missing:
+	Convert top-level Makefile to be generated by automake.
+	"dist" target now includes m4 directory. Updated "libcheck"
+	target to look at dynamic libraries instead of static.
+
 2009-01-17  Nicolas Martin <nicols-guest at users.alioth.debian.org>
 	* pixma_mp150.c:
 	Fixed "Busy mode" exit processing. 

INSTALL

@@ -0,0 +1,237 @@
+Installation Instructions
+*************************
+
+Copyright (C) 1994, 1995, 1996, 1999, 2000, 2001, 2002, 2004, 2005,
+2006, 2007 Free Software Foundation, Inc.
+
+This file is free documentation; the Free Software Foundation gives
+unlimited permission to copy, distribute and modify it.
+
+Basic Installation
+==================
+
+Briefly, the shell commands `./configure; make; make install' should
+configure, build, and install this package.  The following
+more-detailed instructions are generic; see the `README' file for
+instructions specific to this package.
+
+   The `configure' shell script attempts to guess correct values for
+various system-dependent variables used during compilation.  It uses
+those values to create a `Makefile' in each directory of the package.
+It may also create one or more `.h' files containing system-dependent
+definitions.  Finally, it creates a shell script `config.status' that
+you can run in the future to recreate the current configuration, and a
+file `config.log' containing compiler output (useful mainly for
+debugging `configure').
+
+   It can also use an optional file (typically called `config.cache'
+and enabled with `--cache-file=config.cache' or simply `-C') that saves
+the results of its tests to speed up reconfiguring.  Caching is
+disabled by default to prevent problems with accidental use of stale
+cache files.
+
+   If you need to do unusual things to compile the package, please try
+to figure out how `configure' could check whether to do them, and mail
+diffs or instructions to the address given in the `README' so they can
+be considered for the next release.  If you are using the cache, and at
+some point `config.cache' contains results you don't want to keep, you
+may remove or edit it.
+
+   The file `configure.ac' (or `configure.in') is used to create
+`configure' by a program called `autoconf'.  You need `configure.ac' if
+you want to change it or regenerate `configure' using a newer version
+of `autoconf'.
+
+The simplest way to compile this package is:
+
+  1. `cd' to the directory containing the package's source code and type
+     `./configure' to configure the package for your system.
+
+     Running `configure' might take a while.  While running, it prints
+     some messages telling which features it is checking for.
+
+  2. Type `make' to compile the package.
+
+  3. Optionally, type `make check' to run any self-tests that come with
+     the package.
+
+  4. Type `make install' to install the programs and any data files and
+     documentation.
+
+  5. You can remove the program binaries and object files from the
+     source code directory by typing `make clean'.  To also remove the
+     files that `configure' created (so you can compile the package for
+     a different kind of computer), type `make distclean'.  There is
+     also a `make maintainer-clean' target, but that is intended mainly
+     for the package's developers.  If you use it, you may have to get
+     all sorts of other programs in order to regenerate files that came
+     with the distribution.
+
+  6. Often, you can also type `make uninstall' to remove the installed
+     files again.
+
+Compilers and Options
+=====================
+
+Some systems require unusual options for compilation or linking that the
+`configure' script does not know about.  Run `./configure --help' for
+details on some of the pertinent environment variables.
+
+   You can give `configure' initial values for configuration parameters
+by setting variables in the command line or in the environment.  Here
+is an example:
+
+     ./configure CC=c99 CFLAGS=-g LIBS=-lposix
+
+   *Note Defining Variables::, for more details.
+
+Compiling For Multiple Architectures
+====================================
+
+You can compile the package for more than one kind of computer at the
+same time, by placing the object files for each architecture in their
+own directory.  To do this, you can use GNU `make'.  `cd' to the
+directory where you want the object files and executables to go and run
+the `configure' script.  `configure' automatically checks for the
+source code in the directory that `configure' is in and in `..'.
+
+   With a non-GNU `make', it is safer to compile the package for one
+architecture at a time in the source code directory.  After you have
+installed the package for one architecture, use `make distclean' before
+reconfiguring for another architecture.
+
+Installation Names
+==================
+
+By default, `make install' installs the package's commands under
+`/usr/local/bin', include files under `/usr/local/include', etc.  You
+can specify an installation prefix other than `/usr/local' by giving
+`configure' the option `--prefix=PREFIX'.
+
+   You can specify separate installation prefixes for
+architecture-specific files and architecture-independent files.  If you
+pass the option `--exec-prefix=PREFIX' to `configure', the package uses
+PREFIX as the prefix for installing programs and libraries.
+Documentation and other data files still use the regular prefix.
+
+   In addition, if you use an unusual directory layout you can give
+options like `--bindir=DIR' to specify different values for particular
+kinds of files.  Run `configure --help' for a list of the directories
+you can set and what kinds of files go in them.
+
+   If the package supports it, you can cause programs to be installed
+with an extra prefix or suffix on their names by giving `configure' the
+option `--program-prefix=PREFIX' or `--program-suffix=SUFFIX'.
+
+Optional Features
+=================
+
+Some packages pay attention to `--enable-FEATURE' options to
+`configure', where FEATURE indicates an optional part of the package.
+They may also pay attention to `--with-PACKAGE' options, where PACKAGE
+is something like `gnu-as' or `x' (for the X Window System).  The
+`README' should mention any `--enable-' and `--with-' options that the
+package recognizes.
+
+   For packages that use the X Window System, `configure' can usually
+find the X include and library files automatically, but if it doesn't,
+you can use the `configure' options `--x-includes=DIR' and
+`--x-libraries=DIR' to specify their locations.
+
+Specifying the System Type
+==========================
+
+There may be some features `configure' cannot figure out automatically,
+but needs to determine by the type of machine the package will run on.
+Usually, assuming the package is built to be run on the _same_
+architectures, `configure' can figure that out, but if it prints a
+message saying it cannot guess the machine type, give it the
+`--build=TYPE' option.  TYPE can either be a short name for the system
+type, such as `sun4', or a canonical name which has the form:
+
+     CPU-COMPANY-SYSTEM
+
+where SYSTEM can have one of these forms:
+
+     OS KERNEL-OS
+
+   See the file `config.sub' for the possible values of each field.  If
+`config.sub' isn't included in this package, then this package doesn't
+need to know the machine type.
+
+   If you are _building_ compiler tools for cross-compiling, you should
+use the option `--target=TYPE' to select the type of system they will
+produce code for.
+
+   If you want to _use_ a cross compiler, that generates code for a
+platform different from the build platform, you should specify the
+"host" platform (i.e., that on which the generated programs will
+eventually be run) with `--host=TYPE'.
+
+Sharing Defaults
+================
+
+If you want to set default values for `configure' scripts to share, you
+can create a site shell script called `config.site' that gives default
+values for variables like `CC', `cache_file', and `prefix'.
+`configure' looks for `PREFIX/share/config.site' if it exists, then
+`PREFIX/etc/config.site' if it exists.  Or, you can set the
+`CONFIG_SITE' environment variable to the location of the site script.
+A warning: not all `configure' scripts look for a site script.
+
+Defining Variables
+==================
+
+Variables not defined in a site shell script can be set in the
+environment passed to `configure'.  However, some packages may run
+configure again during the build, and the customized values of these
+variables may be lost.  In order to avoid this problem, you should set
+them in the `configure' command line, using `VAR=value'.  For example:
+
+     ./configure CC=/usr/local2/bin/gcc
+
+causes the specified `gcc' to be used as the C compiler (unless it is
+overridden in the site shell script).
+
+Unfortunately, this technique does not work for `CONFIG_SHELL' due to
+an Autoconf bug.  Until the bug is fixed you can use this workaround:
+
+     CONFIG_SHELL=/bin/bash /bin/bash ./configure CONFIG_SHELL=/bin/bash
+
+`configure' Invocation
+======================
+
+`configure' recognizes the following options to control how it operates.
+
+`--help'
+`-h'
+     Print a summary of the options to `configure', and exit.
+
+`--version'
+`-V'
+     Print the version of Autoconf used to generate the `configure'
+     script, and exit.
+
+`--cache-file=FILE'
+     Enable the cache: use and save the results of the tests in FILE,
+     traditionally `config.cache'.  FILE defaults to `/dev/null' to
+     disable caching.
+
+`--config-cache'
+`-C'
+     Alias for `--cache-file=config.cache'.
+
+`--quiet'
+`--silent'
+`-q'
+     Do not print messages saying which checks are being made.  To
+     suppress all normal output, redirect it to `/dev/null' (any error
+     messages will still be shown).
+
+`--srcdir=DIR'
+     Look for the package's source code in directory DIR.  Usually
+     `configure' can determine that directory automatically.
+
+`configure' also accepts some other, not widely useful, options.  Run
+`configure --help' for more details.
+

Makefile.am

@@ -0,0 +1,85 @@
+##  Makefile.am -- an automake template for Makefile.in file
+##  Copyright (C) 2009 Chris Bagwell and Sane Developers.
+##
+##  This file is part of the "Sane" build infra-structure.  See
+##  included LICENSE file for license information.
+
+SUBDIRS = include lib sanei backend frontend tools doc po
+DIST_SUBDIRS = include lib sanei backend frontend tools doc po japi testsuite
+
+EXTRA_DIST = AUTHORS ChangeLog ChangeLog-1.0.0 ChangeLog-1.0.1 \
+ ChangeLog-1.0.2 ChangeLog-1.0.3 ChangeLog-1.0.4 ChangeLog-1.0.5 \
+ ChangeLog-1.0.6 ChangeLog-1.0.7 ChangeLog-1.0.8 ChangeLog-1.0.9 \
+ ChangeLog-1.0.10 ChangeLog-1.0.12 ChangeLog-1.0.13 ChangeLog-1.0.14 \
+ ChangeLog-1.0.15 ChangeLog-1.0.16 ChangeLog-1.0.17 ChangeLog-1.0.18 \
+ ChangeLog-1.0.19 \
+ LICENSE PROBLEMS PROJECTS \
+ README.aix README.beos README.darwin README.djpeg README.freebsd \
+ README.hp-ux README.linux README.netbsd README.openbsd README.os2 \
+ README.solaris README.unixware2 README.unixware7 README.windows \
+ README.zeta $(PACKAGE).lsm
+
+#
+# Keep the .cvsignore files sorted, and use this target to do it.
+#
+PERL=perl
+sort-cvsignore:
+	for f in `find . -name .cvsignore`; do \
+	  $(PERL) -e 'print sort <>;' < $$f > $$f.tmptmp; \
+	  mv $$f.tmptmp $$f; \
+	done
+
+#
+# Check to make sure only sane_ and sanei_ symbols are exported from
+# the libraries
+#
+libcheck:
+	@echo "Libraries exporting 'illegal' symbols:"
+	@for lib in backend/.libs/*.so; do \
+	lines=`nm -g $$lib|grep '\( T \)\|\( D \)'|egrep -v ' _fini| _init'|egrep -v ' sane_| sanei_'`; \
+	if test -n "$$lines" ; then \
+	  echo -e "*** $$lib:\n$$lines"; \
+	  exit 1; \
+	fi \
+	done
+	@echo
+	@echo "Libraries exporting 'non-standard sane_*' symbols:"
+	@for lib in backend/.libs/*.so; do \
+	lines=`nm -g $$lib|grep '\( T \)\|\( D \)'|egrep ' sane_' | egrep -v 'sane_.*init|sane_.*exit|sane_.*get_devices|sane_.*open|sane_.*close|sane_.*get_option_descriptor|sane_.*control_option|sane_.*get_parameters|sane_.*start|sane_.*read|sane_.*cancel|sane_.*set_io_mode|sane_.*get_select_fd|sane_strstatus'` ; \
+	if test -n "$$lines" ; then \
+	  echo -e "*** $$lib:\n$$lines"; \
+	  found_errors="yes"; \
+	  exit 1; \
+	fi \
+	done
+
+# TODO: If software can be updated to pass the libcheck tests again then
+# the following line can be uncommented.  Then we will have a single
+# target to verify the package compiles and installs correctly and does
+# not contain any unwanted public symbols.
+#check-am: libcheck
+
+$(distdir).lsm: dist $(PACKAGE).lsm
+	( cat $(PACKAGE).lsm | \
+	  sed -e "s|_DATE_|`date +%d%b%y`|g" |\
+	  sed -e "s|_VERSION_|$(VERSION)|g" | \
+	  sed -e "s|_T_S_|`find $(distdir).tar.gz -printf "%4k"`|g" |\
+	  sed -e "s|_L_S_|`find $(PACKAGE).lsm -printf "%4k"`|g" >\
+	$(distdir).lsm \
+	)
+lsm: $(distdir).lsm
+
+md5: dist
+	md5sum $(distdir).tar.gz > $(distdir).tar.gz.md5
+
+sane-backends: lsm md5
+
+# Clean files created by custom targets in this file.
+clean-local:
+	rm -f sane-backends-*.lsm
+	rm -f $(distdir).tar.gz.md5
+
+# Clean files created by configure
+distclean-local:
+	rm -f include/_stdint.h
+	rm -f include/byteorder.h