Merge commit '16e9b9c44fa62ea6eec99d1fb7bc43a8f1cc2f7e' into from_ups…

…tream

Conflicts:
	configure.ac
	tcl/target/gd32vf103.cfg

Change-Id: I72bbb973249b7bbfa720696fa2c76a87a41a2e9c

HACKING

@@ -181,10 +181,6 @@ topics. It is possible because @c for/master is not a traditional Git
 branch.
   -# You will need to install this hook, we will look into a better solution:
 @code
-scp -p -P 29418 [email protected]:hooks/commit-msg .git/hooks/
-@endcode
-  Or with http only:
-@code
 wget https://review.openocd.org/tools/hooks/commit-msg
 mv commit-msg .git/hooks
 chmod +x .git/hooks/commit-msg

configure.ac

@@ -383,7 +383,7 @@ AC_ARG_ENABLE([internal-libjaylink],
   [use_internal_libjaylink=$enableval], [use_internal_libjaylink=no])
 
 AC_ARG_ENABLE([remote-bitbang],
-  AS_HELP_STRING([--enable-remote-bitbang], [Enable building support for the Remote Bitbang jtag driver]),
+  AS_HELP_STRING([--enable-remote-bitbang], [Enable building support for the Remote Bitbang driver]),
   [build_remote_bitbang=$enableval], [build_remote_bitbang=yes])
 
 AS_CASE(["${host_cpu}"],
@@ -599,9 +599,9 @@ AS_IF([test "x$use_internal_jimtcl" = "xyes"], [
 
 AS_IF([test "x$build_remote_bitbang" = "xyes"], [
   build_bitbang=yes
-  AC_DEFINE([BUILD_REMOTE_BITBANG], [1], [1 if you want the Remote Bitbang JTAG driver.])
+  AC_DEFINE([BUILD_REMOTE_BITBANG], [1], [1 if you want the Remote Bitbang driver.])
 ], [
-  AC_DEFINE([BUILD_REMOTE_BITBANG], [0], [0 if you don't want the Remote Bitbang JTAG driver.])
+  AC_DEFINE([BUILD_REMOTE_BITBANG], [0], [0 if you don't want the Remote Bitbang driver.])
 ])
 
 AS_IF([test "x$build_sysfsgpio" = "xyes"], [

contrib/firmware/angie/c/include/i2c.h

@@ -19,6 +19,7 @@ void repeated_start(void);
 void stop_cd(void);
 void clock_cd(void);
 void send_ack(void);
+void send_nack(void);
 bool get_ack(void);
 
 uint8_t get_address(uint8_t adr, uint8_t rdwr);

contrib/firmware/angie/c/src/i2c.c

@@ -60,6 +60,16 @@ void send_ack(void)
 	delay_us(1);
 }
 
+void send_nack(void)
+{
+	PIN_SDA = 1;
+	delay_us(1);
+	PIN_SCL = 1;
+	delay_us(1);
+	PIN_SCL = 0;
+	delay_us(1);
+}
+
 bool get_ack(void)
 {
 	PIN_SDA_DIR = 1;

contrib/firmware/angie/c/src/usb.c

@@ -757,14 +757,13 @@ void i2c_recieve(void)
 	PIN_SDA_DIR = 0;
 	if (EP6FIFOBUF[0] == 1) {
 		uint8_t rdwr = EP6FIFOBUF[0];   //read
-		uint8_t reg_adr_check = EP6FIFOBUF[1];
-		uint8_t count = EP6FIFOBUF[2];  //request data count
+		uint8_t data_count = EP6FIFOBUF[1]; //data sent count
+		uint8_t count = EP6FIFOBUF[2];  //requested data count
 		uint8_t adr = EP6FIFOBUF[3];    //address
-		uint8_t reg_adr = EP6FIFOBUF[4];
 		uint8_t address = get_address(adr, rdwr);   //address byte (read command)
 		uint8_t address_2 = get_address(adr, 0);   //address byte 2 (write command)
 
-		printf("%d\n", address);
+		printf("%d\n", address - 1);
 
 		/*  start:   */
 		start_cd();
@@ -773,41 +772,38 @@ void i2c_recieve(void)
 		/*  ack:  */
 		uint8_t ack = get_ack();
 
-		delay_us(10);
-
 		/*   send data   */
-		if (reg_adr_check) { //if there is a byte reg
-			send_byte(reg_adr);
-			/*  ack():  */
-			ack = get_ack();
+		if (data_count) { //if there is a byte reg
+			for (uint8_t i = 0; i < data_count; i++) {
+				send_byte(EP6FIFOBUF[i + 4]);
+				/*  ack():  */
+				ack = get_ack();
+			}
 		}
 
-		delay_us(10);
-
 		/*  repeated start:  */
 		repeated_start();
 		/*  address:   */
 		send_byte(address);
 		/*  get ack:  */
 		ack = get_ack();
 
-		delay_us(10);
-
 		/*   receive data   */
-		for (uint8_t i = 0; i < count; i++) {
+		for (uint8_t i = 0; i < count - 1; i++) {
 			EP8FIFOBUF[i] = receive_byte();
 
-			/*  send ack:  */
+			/*  send ack: */
 			send_ack();
 		}
 
-		delay_ms(1);
+		EP8FIFOBUF[count - 1] = receive_byte();
+
+		/*  send Nack:  */
+		send_nack();
 
 		/*   stop   */
 		stop_cd();
 
-		delay_us(10);
-
 		EP8BCH = 0; //EP8
 		syncdelay(3);
 		EP8BCL = count; //EP8

contrib/loaders/trampoline/espressif/xtensa/Makefile

@@ -0,0 +1,38 @@
+# SPDX-License-Identifier: GPL-2.0-or-later
+
+# Espressif Xtensa Makefile to compile flasher stub wrapper
+# Copyright (C) 2023 Espressif Systems Ltd.
+
+# Prefix for Espressif xtensa cross compilers (can include a directory path)
+CROSS ?= xtensa-esp32-elf-
+
+APP_ARCH := xtensa
+APP_CHIP_PATH := $(shell pwd)
+SRCS := $(APP_CHIP_PATH)/esp_xtensa_stub_tramp_win.S
+
+BIN2C = ../../../../../src/helper/bin2char.sh
+BUILD_DIR = build
+
+APP = esp_xtensa_stub_tramp_win
+APP_OBJ = $(BUILD_DIR)/$(APP).o
+APP_BIN = $(BUILD_DIR)/$(APP).bin
+APP_CODE = $(APP).inc
+
+.PHONY: all clean
+
+all: $(BUILD_DIR) $(APP_OBJ) $(APP_CODE)
+
+$(BUILD_DIR):
+	$(Q) mkdir $@
+
+$(APP_OBJ): $(SRCS)
+	@echo "  CC   $^ -> $@"
+	$(Q) $(CROSS)gcc -c $(CFLAGS)  -o $@ $^
+
+$(APP_CODE): $(APP_OBJ)
+	@echo "  CC   $^ -> $@"
+	$(Q) $(CROSS)objcopy -O binary -j.text $^ $(APP_BIN)
+	$(Q) $(BIN2C) < $(APP_BIN) > $@
+
+clean:
+	$(Q) rm -rf $(BUILD_DIR)

contrib/loaders/trampoline/espressif/xtensa/esp_xtensa_stub_tramp_win.S

@@ -0,0 +1,41 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later */
+
+/***************************************************************************
+ *   Xtensa flasher stub wrapper                                           *
+ *   Copyright (C) 2017 Espressif Systems Ltd.                             *
+ ***************************************************************************/
+
+/*
+ * Expects :
+ * a0 = zero
+ * a1 = stack_base + stack_size - 16, 16 bytes aligned
+ * a8 = address of the function to call
+ * Params :
+ * a2 = command arg0, result (out)
+ * a3 = command arg1
+ * a4 = command arg2
+ * a5 = command arg3
+ * a6 = command arg4
+ * Maximum 5 user args
+ */
+    .text
+
+    .align  4
+_stub_enter:
+    /* initialize initial stack frame for callx8 */
+    addi    a9, sp,  32 /* point 16 past extra save area */
+    s32e    a9, sp, -12 /* access to extra save area */
+    /* prepare args */
+    mov     a10, a2
+    mov     a11, a3
+    mov     a12, a4
+    mov     a13, a5
+    mov     a14, a6
+    /* call stub */
+    callx8  a8
+    /* prepare return value */
+    mov     a2, a10
+    break 0,0
+
+_idle_loop:
+    j _idle_loop

contrib/loaders/trampoline/espressif/xtensa/esp_xtensa_stub_tramp_win.inc

@@ -0,0 +1,3 @@
+/* Autogenerated with ../../../../../src/helper/bin2char.sh */
+0x92,0xc1,0x20,0x90,0xd1,0x49,0xad,0x02,0xbd,0x03,0xcd,0x04,0xdd,0x05,0x60,0xe6,
+0x20,0xe0,0x08,0x00,0x2d,0x0a,0x00,0x40,0x00,0x06,0xff,0xff,