You signed in with another tab or window. Reload to refresh your session.You signed out in another tab or window. Reload to refresh your session.You switched accounts on another tab or window. Reload to refresh your session.Dismiss alert
And could you tell me how to run the independent camera? Sorry to bother you again.
Changing this should be sufficient iirc. The parameter controls the maximum speed of the camera allowed by the NMPC. If the speed is 0 clearly it resorts to make rotate only the robot while if it's != 0 it will plan the optimal rotation according to the kinematic definition here
Note: if you change the config file you need to rebuild! Otherwise it is possible to use either dynamic reconfigure or the yaml file.
Changing this should be sufficient iirc. The parameter controls the maximum speed of the camera allowed by the NMPC. If the speed is 0 clearly it resorts to make rotate only the robot while if it's != 0 it will plan the optimal rotation according to the kinematic definition here
Note: if you change the config file you need to rebuild! Otherwise it is possible to use either dynamic reconfigure or the yaml file.
Originally posted by @eliabntt in #5 (comment)
The text was updated successfully, but these errors were encountered: