A Chainbridge UI for Edgeware, configured for bridging Polygon assets to Edgeware.
This document includes instructions for setting up an ERC20 asset bridge between Edgeware and Polygon. It is based on instructions at https://chainbridge.chainsafe.io/live-evm-bridge/ and code from https://github.com/ChainSafe/chainbridge-ui.
See also https://github.com/dtradeorg/edg-bridge, another implementation of an ETH to EDG bridge by the dTrade team.
You will need a new Metamask account, connected to both Polygon and Edgeware. You should use a fresh account, as you'll be exporting the private key and providing it to the Chainbridge relayers in this tutorial. (Using an existing account risks your funds and to the bridge.)
Add these networks to Metamask:
Polygon
https://rpc-mainnet.matic.network
137
MATIC
https://polygonscan.com/
Beresheet
http://beresheet1.edgewa.re:9933
2022
testEDG
https://beresheet.edgscan.com/
Send some MATIC to the address from an exchange (a few MATIC is enough).
Go to https://edgewa.re/keygen and use the bottom tool to convert your EVM address into a mainnet address. Go to polkadot-js at https://polkadot.js.org/apps/?rpc=wss%3A%2F%2Fberesheet1.edgewa.re#/ and send some EDG to that address (a few EDG is enough).
Check Metamask to make sure you've received your balances on both chains.
Download and install the chainbridge CLI. Note that we are working off commit hash 5bd78d4, which has support for customizing decimals in bridged contracts:
git clone https://github.com/ChainSafe/chainbridge-deploy \
&& cd chainbridge-deploy/cb-sol-cli \
&& git checkout 5bd78d4 \
&& npm install \
&& make install
You should set up some environment variables before proceeding.
export SRC_ADDR=<Your public key on Goerli>
export SRC_PK=<Your private key on Goerli>
export DST_ADDR=<Your public key on Rinkeby>
export DST_PK=<Your private key on Rinkeby>
export SRC_GATEWAY=https://rpc-mainnet.matic.network
export DST_GATEWAY=http://beresheet1.edgewa.re:9933
You will also need to set up each token being bridged over from Polygon to Edgeware separately. As an example, the token address for USDC on Polygon is 0x2791bca1f2de4661ed88a30c99a7a9449aa84174
The resource ID can be any unique hex identifier, with the last 31 bytes available
export SRC_TOKEN=<Matic contract address of the asset to bridge>
export RESOURCE_ID=0x000000000000000000000000000000c76ebe4a02bbc34786d860b355f5a5ce00
Deploy our chainbridge contracts on Polygon:
cb-sol-cli --url $SRC_GATEWAY --privateKey $SRC_PK --gasPrice 10000000000 deploy \
--bridge --erc20Handler \
--relayers $SRC_ADDR \
--relayerThreshold 1\
--chainId 0
Take note of the output of the above command, and assign them to the following variables:
export SRC_BRIDGE=<Bridge address>
export SRC_HANDLER=<Erc20 Handler address>
Register the asset we are bridging over:
cb-sol-cli --url $SRC_GATEWAY --privateKey $SRC_PK \
--gasPrice 10000000000 \
bridge register-resource \
--bridge $SRC_BRIDGE \
--handler $SRC_HANDLER \
--resourceId $RESOURCE_ID \
--targetContract $SRC_TOKEN
Deploy the bridged USDC contracts on the destination side. Note that this is done with 6 decimal points:
cb-sol-cli --url $DST_GATEWAY --privateKey $DST_PK --gasPrice 10000000000 deploy\
--bridge --erc20 --erc20Decimals 6 --erc20Handler \
--relayers $DST_ADDR \
--relayerThreshold 1 \
--chainId 1
Take note of the output of the above command and assign them to the following variables (for the Bridge, Erc20 handler, and bridged Erc20 asset address):
export DST_BRIDGE=<Dest bridge address>
export DST_HANDLER=<Dest Erc20 Handler>
export DST_TOKEN=<Dest Erc20 address>
Register the bridged contract on the bridge:
cb-sol-cli --url $DST_GATEWAY --privateKey $DST_PK --gasPrice 10000000000 bridge register-resource \
--bridge $DST_BRIDGE \
--handler $DST_HANDLER \
--resourceId $RESOURCE_ID \
--targetContract $DST_TOKEN
Configure the token as mintable/burnable:
cb-sol-cli --url $DST_GATEWAY --privateKey $DST_PK --gasPrice 10000000000 bridge set-burn \
--bridge $DST_BRIDGE \
--handler $DST_HANDLER \
--tokenContract $DST_TOKEN
Allow minting new bridged USDC:
cb-sol-cli --url $DST_GATEWAY --privateKey $DST_PK --gasPrice 10000000000 erc20 add-minter \
--minter $DST_HANDLER \
--erc20Address $DST_TOKEN
At this point the bridge has been set up, and we should now set up relayers.
git clone -b v1.1.1 --depth 1 https://github.com/ChainSafe/chainbridge \
&& cd chainbridge \
&& make build
Configure the relayer:
echo "{
\"chains\": [
{
\"name\": \"Polygon\",
\"type\": \"ethereum\",
\"id\": \"0\",
\"endpoint\": \"wss://rpc-mainnet.matic.quiknode.pro\",
\"from\": \"$SRC_ADDR\",
\"opts\": {
\"bridge\": \"$SRC_BRIDGE\",
\"erc20Handler\": \"$SRC_HANDLER\",
\"genericHandler\": \"$SRC_HANDLER\",
\"gasLimit\": \"1000000\",
\"maxGasPrice\": \"10000000000\"
}
},
{
\"name\": \"Beresheet\",
\"type\": \"ethereum\",
\"id\": \"1\",
\"endpoint\": \"ws://beresheet1.edgewa.re:9944\",
\"from\": \"$DST_ADDR\",
\"opts\": {
\"bridge\": \"$DST_BRIDGE\",
\"erc20Handler\": \"$DST_HANDLER\",
\"genericHandler\": \"$DST_HANDLER\",
\"gasLimit\": \"1000000\",
\"maxGasPrice\": \"10000000000\"
}
}
]
}" > config.json
Set up the relayer's keystore with private keys. You will be asked for a password, which you will have to re-enter when starting the relayer.
./build/chainbridge accounts import --privateKey $SRC_PK
./build/chainbridge accounts import --privateKey $DST_PK
Start the relayer:
./build/chainbridge --config config.json --verbosity trace --latest
You may follow the instructions at https://chainbridge.chainsafe.io/live-evm-bridge/ to use the CLI interface to transfer tokens (note that you will need some Matic USDC for the instructions to work.
Otherwise, continue to set up the chainbridge UI.
Setting up the Chainbridge UI:
git clone [email protected]:ChainSafe/chainbridge-ui.git
cd chainbridge-ui
yarn
cp .env.example .env
Update the .env file
Go to src/chainbridgeConfig.ts and update chainbridgeConfig to
include these parameters. You will need to change the second
default chain from a Substrate to an Ethereum chain:
- chainId: 0
- networkId: 137
- name: Polygon
- type: Ethereum
- bridgeAddress: $SRC_BRIDGE
- erc20HandlerAddress: $SRC_HANDLER
- rpcUrl: https://rpc-mainnet.matic.network
- nativeTokenSymbol: MATIC
- tokens:
- address: $SRC_TOKEN
- imageUri: USDCIcon
- resourceId: $RESOURCE_ID
And for the destination chain:
- chainId: 1
- networkId: 2022
- name: Beresheet
- type: Ethereum
- bridgeAddress: $DST_BRIDGE
- erc20HandlerAddress: $DST_HANDLER
- rpcUrl: http://beresheet1.edgewa.re:9933
- nativeTokenSymbol: testEDG
- tokens:
- address: $DST_TOKEN
- imageUri: USDCIcon
- resourceId: $RESOURCE_ID
Once this is done, you can create and run the chainbridge UI.
yarn start
We recommend doing so with a few added variables in .env. Go to https://explorer.blocknative.com/account and create a blocknative account. This will allow the bridge to watch for mempool transactions from the provided RPC node (e.g. Polygon and Beresheet):
REACT_APP_BLOCKNATIVE_DAPP_ID=[Your Blocknative API key]
REACT_APP_SUPPORT_SERVICE=Discord
REACT_APP_SUPPORT_URL=[A link to the Discord or Telegram channel for support]
To swap, you may need to go to a DEX to obtain some USDC:
You can now use Chainbridge to send funds to and from the bridge.
To build the chainbridge UI:
yarn build
Finally, we recommend using Vercel to automatically build the
chainbridge UI whenever a new version is pushed to main. See the
Vercel docs for details: https://vercel.com/docs/platform/deployments