Module: firewalld

Description

This module manages firewalld, the userland interface that replaces iptables and ships with RHEL7. The module manages firewalld itself as well as providing types and providers for managing firewalld zones, ports, and rich rules.

Compatibility

Latest versions of this module (3.0+) are only supported on Puppet 4.0+. 2.2.0 is the latest version to run on Puppet 3.x, important patches (security bugs..etc) will be accepted in the 2.x until Puppet 3.x is offically end-of-life, but new features will only be accepted in 3.x.

Usage

class { 'firewalld': }

Parameters

• package: Name of the package to install (default firewalld)
• package_ensure: Default 'installed', can be any supported ensure type for the package resource
• config_package: Name of the GUI package, default firewall-config
• install_gui: Whether or not to install the config_package (default: false)
• service_ensure: Whether the service should be running or not (default: running)
• service_enable: Whether to enable the service
• default_zone: Optional, set the default zone for interfaces (default: undef)
• default_service_zone: Optional, set the default zone for services (default: undef)
• default_port_zone: Optional, set the default zone for ports (default: undef)
• default_port_protocol: Optional, set the default protocol for ports (default: undef)
• log_denied: Optional, (firewalld-0.4.3.2-8+) Log denied packets, can be one of off, all, multicast, unicast, broadcast (default: undef)
• zones: A hash of firewalld zones to configure
• ports: A hash of firewalld ports to configure
• services: A hash of firewalld services to configure
• rich_rules: A hash of firewalld rich rules to configure
• custom_services: A hash of firewalld custom services to configure
• direct_rules: A hash of firewalld direct rules to configure
• direct_chains: A hash of firewalld direct chains to configure
• direct_passthroughs: A hash of firewalld direct passthroughs to configure
• purge_direct_rules: True or false, whether to purge firewalld direct rules
• purge_direct_chains: True or false, whether to purge firewalld direct chains
• purge_direct_passthroughs: True or false, whether to purge firewalld direct passthroughs

Resource Types

The firewalld module contains types and providers to manage zones, services, ports, and rich rules by interfacing with the firewall-cmd command. The following types are currently supported. Note that all zone, service, port, and rule management is done in --permanent mode, and a complete reload will be triggered anytime something changes.

This module supports a number of resource types

• firewalld_zone
• firewalld_port
• firewalld_service
• firewalld_ipset
• firewalld_rich_rule
• firewalld_direct_chain
• firewalld_direct_rule
• firewalld_direct_passthrough

Note, it is always recommended to include the ::firewalld class if you are going to use any of these resources from another Puppet class (eg: a profile) as it sets up the relationships between the firewalld service resource and the exec resource to reload the firewall upon change. Without the firewalld class included then the firewall will not be reloaded upon change. The recommended pattern is to put all resources into hiera and let the firewalld class set them up. Examples of both forms are presented for the resource types below.

Firewalld Zones

Firewalld zones can be managed with the firewalld_zone resource type.

Example in Class:

  firewalld_zone { 'restricted':
    ensure           => present,
    target           => '%%REJECT%%',
    purge_rich_rules => true,
    purge_services   => true,
    purge_ports      => true,
  }

Example in Hiera:

firewalld::zones:
  restricted:
    ensure: present
    target: '%%REJECT%%'
    purge_rich_rules: true
    purge_services: true
    purge_ports: true

Parameters

• target: Specify the target of the zone.
• interfaces: An array of interfaces for this zone
• sources: An array of sources for the zone
• icmp_blocks: An array of ICMP blocks for the zone
• masquerade: If set to true or false specifies whether or not to add masquerading to the zone
• purge_rich_rules: Optional, and defaulted to false. When true any configured rich rules found in the zone that do not match what is in the Puppet catalog will be purged.
• purge_services: Optional, and defaulted to false. When true any configured services found in the zone that do not match what is in the Puppet catalog will be purged. Warning: This includes the default ssh service, if you need SSH to access the box, make sure you add the service through either a rich firewall rule, port, or service (see below) or you will lock yourself out!
• purge_ports: Optional, and defaulted to false. When true any configured ports found in the zone that do not match what is in the Puppet catalog will be purged. Warning: As with services, this includes the default ssh port. If you fail to specify the appropriate port, rich rule, or service, you will lock yourself out.

Firewalld rich rules

Firewalld rich rules are managed using the firewalld_rich_rule resource type

firewalld_rich_rules will autorequire the firewalld_zone specified in the zone parameter so there is no need to add dependencies for this

Example in Class:

  firewalld_rich_rule { 'Accept SSH from barny':
    ensure => present,
    zone   => 'restricted',
    source => '192.168.1.2/32',
    service => 'ssh',
    action  => 'accept',
  }

Example in Hiera:

firewalld::rich_rules:
  'Accept SSH from barny':
    ensure: present
    zone: restricted
    source: '192.168.1.2/32'
    service: 'ssh'
    action: 'accept'

Parameters

• zone: Name of the zone this rich rule belongs to

• family: Protocol family, defaults to ipv4

• source: Source address information. This can be a hash containing the keys address or ipset and invert, or a string containing just the IP address

     source => '192.168.2.1',
  
     source => { 'address' => '192.168.1.1', 'invert' => true }
     source => { 'ipset' => 'whitelist', 'invert' => true }
     source => { 'ipset' => 'blacklist' }

• dest: Destination address information. This can be a hash containing the keys address or ipset and invert, or a string containing just the IP address

     dest => '192.168.2.1',
  
     dest => { 'address' => '192.168.1.1', 'invert' => true }
     dest => { 'ipset' => 'whitelist', 'invert' => true }
     dest => { 'ipset' => 'blacklist' }

• log: When set to true will enable logging, optionally this can be hash with prefix, level and limit

     log => { 'level' => 'debug', 'prefix' => 'foo' },
  
     log => true,

• audit: When set to true will enable auditing, optionally this can be hash with limit

     audit => { 'limit' => '3/s' },
  
     audit => true,

• action: A string containing the action accept, reject or drop. For reject it can be optionally supplied as a hash containing type

     action => 'accept'
  
     action => { 'action' => 'reject', 'type' => 'bad' }

The following paramters are the element of the rich rule, only one may be used.

• service: Name of the service

• protocol: Protocol of the rich rule

• port: A hash containing port and protocol values

     port => {
       'port' => 80,
       'protocol' => 'tcp',
     },

• icmp_block: Specify an icmp-block for the rule

• masquerade: Set to true or false to enable masquerading

• forward_port: Set forward-port, this should be a hash containing port,protocol,to_port,to_addr

     forward_port => {
       'port' => '8080',
       'protocol' => 'tcp',
       'to_addr' => '10.2.1.1',
       'to_port' => '8993'
     },

Firewalld Custom Service

The firewalld::custom_service defined type creates and manages custom services. It makes the service usable by firewalld, but does not add it to any zones. To do that, use the firewalld::service type.

Example in Class:

    firewalld::custom_service{'puppet':
      short       => 'puppet,
      description => 'Puppet Client access Puppet Server',
      port        => [
        {
            'port'     => '8140',
            'protocol' => 'tcp',
        },
        {
            'port'     => '8140',
            'protocol' => 'udp',
        },
      ],
      module      => ['nf_conntrack_netbios_ns'],
      destination => {
        'ipv4' => '127.0.0.1',
        'ipv6' => '::1'
      }
    }

Example in Hiera:

firewalld::custom_services:
  puppet:
    short: 'puppet'
    description: 'Puppet Client access Puppet Server'
    port:
      - port: 8140
        protocol: 'tcp'
    module: 'nf_conntrack_netbios_ns'
    destination:
      ipv4: '127.0.0.1'
      ipv6: '::1'

This resource will create the following XML service definition in /etc/firewalld/services/XZY.xml

    <?xml version="1.0" encoding="utf-8"?>
    <service>
      <short>puppet</short>
      <description>Puppet Client access Puppet Server</description>
      <port protocol="tcp" port="8140" />
      <port protocol="udp" port="8140" />
      <module name="nf_conntrack_netbios_ns"/>
      <destination ipv4="127.0.0.1" ipv6="::1"/>
    </service>

and you will also see 'puppet' in the service list when you issue firewall-cmd --permanent --get-services

Parameters

• short: (namevar) The short name of the service (what you see in the firewalld command line output)

• description: (Optional) A short description of the service

• port: (Optional) The protocol / port definitions for this service. Specified as an array of hashes, where each hash defines a protocol and/or port associated with this service. Each hash requires both port and protocol keys, even if the value is an empty string. Specifying a port only works for TCP & UDP, otherwise leave it empty and the entire protocol will be allowed. Valid protocols are tcp, udp, or any protocol defined in /etc/protocols

     port => [{'port' => '1234', 'protocol' => 'tcp'}],
  
     port => [{'port' => '4321', 'protocol' => 'udp'}, {'protocol' => 'rdp'}],

The port parameter can also take a range of ports separated by a colon, for example:

   port => [ {'port' => '8000:8002', 'protocol' => 'tcp']} ]

will produce;

    <port protocol="tcp" port="8000" />
    <port protocol="tcp" port="8001" />
    <port protocol="tcp" port="8002" />

• module: (Optional) An array of strings specifying netfilter kernel helper modules associated with this service

• destination: (Optional) A hash specifying the destination network as a network IP address (optional with /mask), or a plain IP address. Valid hash keys are 'ipv4' and 'ipv6', with values corresponding to the IP / mask associated with each of those protocols. The use of hostnames is possible but not recommended, because these will only be resolved at service activation and transmitted to the kernel.

     destination => {'ipv4' => '127.0.0.1', 'ipv6' => '::1'},
  
     destination => {'ipv4' => '192.168.0.0/24'},

• config_dir: The location where the service definition XML files will be stored. Defaults to /etc/firewalld/services

Firewalld Service

The firewalld_service type is used to add or remove both built in and custom services from zones.

firewalld_service will autorequire the firewalld_zone specified in the zone parameter and the firewalld::custom_service specified in the service parameter, so there is no need to add dependencies for this

Example in Class:

  firewalld_service { 'Allow SSH from the external zone':
    ensure  => 'present',
    service => 'ssh',
    zone    => 'external',
  }

Example in Hiera:

firewalld::services:
  'Allow SSH from the external zone':
    ensure: present
    service: ssh
    zone: external
  dhcp:
    ensure: absent
    service: dhcp
    zone: public
  dhcpv6-client:
    ensure: present
    service: dhcpv6-client
    zone: public

Parameters

• service: Name of the service to manage, defaults to the resource name.

• zone: Name of the zone in which you want to manage the service, defaults to parameter default_service_zone of class firewalld if specified.

• ensure: Whether to add (present) or remove the service (absent), defaults to present.

Firewalld Ipsets

Firewalld IPsets (on supported versions of firewalld) can be managed using the firewalld_ipset resource type

Example:

  firewalld_ipset { 'whitelist':
    ensure => present,
    entries => [ '192.168.0.1', '192.168.0.2' ]
  }

Example in Hiera:

firewalld::ipsets:
  whitelist:
    entries:
      - 192.168.0.1
      - 192.168.0.2

Parameters

• entries: An array of entries for the IPset
• type: Type of ipset (default: hash:ip)
• options: A hash of options for the IPset (eg: { "family" => "ipv6"})

Note that type and options are parameters used when creating the IPset and are not managed after creation - to change the type or options of an ipset you must delete the existing ipset first.

Firewalld Ports

Firewalld ports can be managed with the firewalld_port resource type.

firewalld_port will autorequire the firewalld_zone specified in the zone parameter so there is no need to add dependencies for this

Example:

  firewalld_port { 'Open port 8080 in the public zone':
    ensure   => present,
    zone     => 'public',
    port     => 8080,
    protocol => 'tcp',
  }

Example in Hiera:

firewalld::ports:
  'Open port 8080 in the public zone':
    ensure: present
    zone: public
    port: 8080
    protocol: 'tcp'

Parameters

• zone: Name of the zone this port belongs to, defaults to parameter default_port_zone of class firewalld if specified.

• port: The port to manage, defaults to the resource name.

• protocol: The protocol this port uses, e.g. tcp or udp, defaults to parameter default_port_protocol of class firewalld if specified.

• ensure: Whether to add (present) or remove the service (absent), defaults to present.

Firewalld Direct Chains

Direct chains can be managed with the firewalld_direct_chain type

Example:

firewalld_direct_chain {'Add custom chain LOG_DROPS':
name           => 'LOG_DROPS',
ensure         => present,
inet_protocol  => 'ipv4',
table          => 'filter',
}

The title can also be mapped to the types namevars using a colon delimited string, so the above can also be represented as

firewall_direct_chain { 'ipv4:filter:LOG_DROPS':
  ensure => present,
}

Example in hiera

firewalld::direct_chains:
  'Add custom chain LOG_DROPS':
    name: LOG_DROPS
    ensure: present
    inet_protocol: ipv4
    table: filter

Parameters

• name: name of the chain, eg LOG_DROPS (namevar)
• inet_protocol: ipv4 or ipv6, defaults to ipv4 (namevar)
• table: The table (eg: filter) to apply the chain (namevar)

Firewalld Direct Rules

Direct rules can be applied using the firewalld_direct_rule type

Example:

  firewalld_direct_rule {'Allow outgoing SSH connection':
      ensure         => 'present',
      inet_protocol  => 'ipv4',
      table          => 'filter',
      chain          => 'OUTPUT',
      priority       => 1,
      args           => '-p tcp --dport=22 -j ACCEPT',
  }

Example in hiera

firewalld::direct_rules:
  'Allow outgoing SSH connection':
    ensure: present
    inet_protocol: ipv4
    table: filter
    chain: OUTPUT
    priority: 1
    args: '-p tcp --dport=22 -j ACCEPT'

Parameters

• name: Resource name in Puppet
• ensure: present or absent
• inet_protocol: ipv4 or ipv6, defaults to ipv4
• table: Table (eg: filter) which to apply the rule
• chain: Chain (eg: OUTPUT) which to apply the rule
• priority: The priority number of the rule (e.g: 0, 1, 2, ... 99)
• args: Any iptables, ip6tables and ebtables command line arguments

Firewalld Direct Passthroughs

Direct passthroughs can be applied using the firewalld_direct_passthrough type

Example:

  firewalld_direct_passthrough {'Forward traffic from OUTPUT to OUTPUT_filter':
      ensure         => 'present',
      inet_protocol  => 'ipv4',
      args           => '-A OUTPUT -j OUTPUT_filter'
  }

Example in hiera

firewalld::direct_passthroughs:
  'Forward traffic from OUTPUT to OUTPUT_filter':
    ensure: present
    inet_protocol: ipv4
    args: '-A OUTPUT -j OUTPUT_filter'

Parameters

• name: Resource name in Puppet
• ensure: present or absent
• inet_protocol: ipv4 or ipv6, defaults to ipv4
• args: Name of the passthroughhrough to add (e.g: -A OUTPUT -j OUTPUT_filter)

Author

• Written and maintained by Craig Dunn [email protected] @crayfishx
• Sponsored by Baloise Group http://baloise.github.io