Relayer

THIS REPO HAS BEEN ARCHIVED, ALL NEW PRS AND ISSUE TRACKING WILL BE CONDUCTED IN THE UPSTREAM REPO --> https://github.com/cosmos/relayer

This repository contains a Golang implementation of a Cosmos IBC relayer. The relayer package contains a basic relayer implementation that is meant for users wanting to relay packets/data between sets of IBC-enabled chains.

The relayer implementation also acts as a base reference implementation for those wanting to build their IBC-compliant relayer.

NOTE: IBC is currently early in its lifecycle. This relayer is as well. Expect minor non critical errors when used in production. rly should always be run in a secure environment and only with just enough funds to relay transactions.

• Relayer
  • Quickstart Guide
  • General Usage
  • Features
  • Relayer Terminology
  • Recommended Pruning Settings
  • Compatibility Table
  • Testnet
  • Demo
  • Security Notice
  • Code of Conduct

Quickstart Guide

To quickly setup the IBC relayer on a canonical path (i.e. path being actively used) between two IBC-enabled networks, the following steps should be performed:

1. Install the latest release via GitHub as follows or by downloading built binaries on the releases page.

   $ git clone [email protected]:strangelove-ventures/relayer.git
   $ git checkout v1.0.0
   $ cd relayer && make install
   

2. Initialize the relayer's configuration.

   $ rly config init

3. Ensure the chains you want to configure have the pertinent config files here. Don't see the chain you want to relay on? Please open a PR to add this metadata to the GitHub repo!

4. In our example we will configure the relayer to operate between the Cosmos Hub & Osmosis. The fetch cmd will retrieve the relevant chain configurations from GitHub & add them to the relayers config file.

   $ rly fetch chain cosmoshub-4  
   $ rly fetch chain osmosis-1

5. Fetch and configure the relevant path configuration files for the two chains.

   $ rly fetch paths

6. The relayer connects to a node on the respective networks, via the configured RPC endpoints for each chain. Ensure the rpc-addr field for both chains in config.yaml points to a valid RPC endpoint.

NOTE: Strangelove maintains archive nodes for a number of networks and provides them for public usage. Chains that we maintain endpoints for are preconfigured.

7. Either import or create new keys for the relayer to use when signing and relaying transactions.
   key-name is an identifier of your choosing.

   $ rly keys add cosmoshub-4 [key-name]  
   $ rly keys add osmosis-1 [key-name]  

8. Assign the relayer chain-specific keys created or imported above to the specific chain's configuration.
   key-name is the same as Step 7.

   $ rly chains edit cosmoshub-4 key [key-name]  
   $ rly chains edit osmosis-1 key [key-name]  

9. Both relayer accounts, i.e. the two keys we just added or imported, need to be funded with tokens on the appropriate network in order to successfully relay transactions between the IBC-connected networks. How this occurs depends on the network, context and environment, e.g. local or test networks can use a faucet.

10. Ensure both relayer accounts are funded by querying each.

    $ rly q balance cosmoshub-4
    $ rly q balance osmosis-1

11. Finally, we start the relayer on the path. The relayer will periodically update the clients and listen for IBC messages to relay.

    $ rly paths list
    $ rly start {path}

General Usage

To setup and start the IBC relayer between two IBC-enabled networks, the following steps are typically performed:

1. Install the latest release via GitHub as follows or by downloading built binaries on the releases page.

   $ git clone [email protected]:strangelove-ventures/relayer.git
   $ git checkout v1.0.0-rc2
   $ cd relayer && make install
   

2. Initialize the relayer's configuration.

   $ rly config init

3. Add relevant chain configurations to the relayer's configuration. See the Chain type for more information.

   e.g. chain configuration:

   # chain_a_config.json
   {
     "chain-id": "chain-a",
     "rpc-addr": "http://127.0.0.1:26657",
     "account-prefix": "cosmos",
     "gas-adjustment": 1.5,
     "gas-prices": "0.001umuon",
     "trusting-period": "10m"
   }

   $ rly chains add -f chain_a_config.json
   $ rly chains add -f chain_b_config.json

4. The relayer connects to a node on the respective networks, via the configured RPC endpoints for each chain. Ensure the rpc-addr field for both chains in config.yaml points to a valid RPC endpoint.

5. Either import or create new keys for the relayer to use when signing and relaying transactions.

   $ rly keys add chain-a test-key-a # relayer key for chain-a
   $ rly keys add chain-b test-key-b # relayer key for chain-b

6. Assign the relayer chain-specific keys created or imported above to the specific chain's configuration. Note, key from step (5).

   $ rly chains edit chain-a key test-key-a
   $ rly chains edit chain-b key test-key-b

7. Both relayer accounts, e.g. relayer-chain-a and relayer-chain-b, need to funded with tokens in order to successfully sign and relay transactions between the IBC-connected networks. How this occurs depends on the network, context and environment, e.g. local or test networks can use a faucet.

8. Ensure both relayer accounts are funded by querying each.

   $ rly q balance chain-a
   $ rly q balance chain-b

9. Next, we generate a new path representing a client, connection, channel and a specific port between the two networks.

   $ rly paths generate chain-a chain-b transfer --port=transfer

10. Finally, we start the relayer on the path created in Step 9. The relayer will periodically update the clients and listen for IBC messages to relay.

    $ rly start transfer

Features

The relayer supports the following:

• creating IBC connections
• creating IBC transfer channels.
• initiating a cross chain transfer
• relaying a cross chain transfer transaction, its acknowledgement, and timeouts
• relaying from state
• relaying from streaming events
• sending an UpgradePlan proposal for an IBC breaking upgrade
• upgrading clients after a counter-party chain has performed an upgrade for IBC breaking changes
• fetching canonical chain and path metadata from the GitHub repo to quickly bootstrap a relayer instance

The relayer currently cannot:

• create clients with user chosen parameters (such as UpgradePath)
• submit IBC client unfreezing proposals
• monitor and submit misbehavior for clients
• use IBC light clients other than Tendermint such as Solo Machine
• connect to chains which don't implement/enable IBC
• connect to chains using a different IBC implementation (chains not using SDK's x/ibc module)

Relayer Terminology

A path represents an abstraction between two IBC-connected networks. Specifically, the path abstraction contains metadata about a source chain, a destination chain and a relaying strategy between the two networks. The metadata for both the source and destination networks contains the following:

• chain-id: The chain ID of the network.
• client-id: The client ID on the corresponding chain representing the other chain's light client.
• connection-id: The connection ID on the corresponding chain representing a connection to the other chain.
• channel-id: The channel ID on the corresponding chain's connection representing a channel on the other chain.
• port-id: The IBC port ID which a relevant module binds to on the corresponding chain.
• order: Determines if packets from a sending module must be ORDERED or UNORDERED.
• version: IBC version.

Two chains may have many different paths between them. Any path with different clients, connections, or channels are considered uniquely different and non-fungible.

When using with live networks, it is advised to pre-select your desired parameters for your clients, connections, and channels. The relayer will automatically reuse any existing clients that match your configurations since clients, connections, and channels are public goods (no one has control over them).

Recommended Pruning Settings

The relayer relies on old headers and proofs constructed at past block heights to facilitate correct IBC behavior. For this reason, connected full nodes may prune old blocks once they have passed the unbonding period of the chain but not before. Not pruning at all is not necessary for a fully functional relayer, however, pruning everything will lead to many issues!

Here are the settings used to configure SDK-based full nodes (assuming 3 week unbonding period):

... --pruning=custom --pruning-keep-recent=362880 --pruning-keep-every=0 --pruning-interval=100

362880 (3*7*24*60*60 / 5 = 362880) represents a 3 week unbonding period (assuming 5 seconds per block).

Note, operators can tweak --pruning-keep-every and --pruning-interval to their liking.

Demo

While the relayer is under active development, it is meant primarily as a learning tool to better understand the Inter-Blockchain Communication (IBC) protocol. In that vein, the following demo demonstrates the core functionality which will remain even after the changes:

# ensure go and jq are installed 
# Go Documentation: https://golang.org/doc/install
# jq Documentation: https://stedolan.github.io/jq/download

# First, download and build the gaia source code so we have a working blockchain to test against
$ make get-gaia build-gaia

# two-chainz creates two gaia-based chains with data directories in this repo
# it also builds and configures the relayer for operations with those chains
$ ./scripts/two-chainz
# NOTE: If you want to stop the two gaia-based chains running in the background use `killall gaiad`

# At this point the relayer --home directory is ready for normal operations between
# ibc-0 and ibc-1. Looking at the folder structure of the relayer at this point is helpful
# NOTE: to install tree try `brew install tree` on mac or `apt install tree` on linux
$ tree ~/.relayer

# See if the chains are ready to relay over
$ rly chains list

# See the current status of the path you will relay over
$ rly paths list

# Now you can connect the two chains with one command:
$ rly tx link demo -d -o 3s

# Check the token balances on both chains
$ rly q balance ibc-0
$ rly q bal ibc-1

# Then send some tokens between the chains
$ rly tx transfer ibc-0 ibc-1 1000000samoleans $(rly chains address ibc-1)
$ rly tx relay demo -d
$ rly tx acks demo -d

# See that the transfer has completed
$ rly q bal ibc-0
$ rly q bal ibc-1

# Send the tokens back to the account on ibc-0
$ rly tx transfer ibc-1 ibc-0 1000000ibc/27A6394C3F9FF9C9DCF5DFFADF9BB5FE9A37C7E92B006199894CF1824DF9AC7C $(rly chains addr ibc-0)
$ rly tx relay demo -d
$ rly tx acks demo -d

# See that the return trip has completed
$ rly q bal ibc-0
$ rly q bal ibc-1

# NOTE: you will see the stake balances decreasing on each chain. This is to pay for fees
# You can change the amount of fees you are paying on each chain in the configuration.

Security Notice

If you would like to report a security critical bug related to the relayer repo, please reach out @jackzampolin or @Ethereal0ne on telegram.

Code of Conduct

The Cosmos community is dedicated to providing an inclusive and harassment free experience for contributors. Please visit Code of Conduct for more information.