Skip to content

dongmingh/v1performance

Repository files navigation

Performance Traffic Engine - PTE

The Performance Traffic Engine (PTE) uses SDKs to interact with Hyperledger Fabric networks by sending requests to and receiving responses from one or more networks. Currently, PTE only uses Hyperledger Fabric Client (HFC) Node SDK and will include other SDKs in the future.

PTE is designed to meet two-fold requirements:

  1. to handle the complexity of the Hyperledger Fabric network, e.g., locations and number of network, number of channels, organizations, peers, orderers etc.
  2. to support various test cases, e.g., various chaincodes, transaction number, duration, mode, type, and payload size etc,

In order to meet the two-fold requirements above, flexibility and modularity are the primary design concepts of PTE regarding implementation and usage. Moreover, PTE provides users many options for their test cases, see below for available options. The design of PTE is demonstrated in the diagram below:

In brief, PTE has the following features:

  • channel: to create and join channel
  • chaincode: to install and instantiate user specified chaincode
  • transactions: to deliver transactions to the targeted peers with specified transaction mode, type, and frequency
  • network: to interact with local and/or remote networks simultaneously
  • scaling: easy to work with any number of networks, orderers, peers, organizations, channels, chaincodes etc.
  • events: to open and listen to event port and maintain the record of events received and un-received
  • blockchain height: to query blockchain height and number of transactions
  • results: to provide number of transactions sent versus the events received, and validates blockchain contents after last transaction
  • multiple PTEs: easy to manage multiple PTEs, see the diagram below:

Table Of Contents:


Code Base for v1.0.0

  • Fabric commit level: e4b47043270f2293daabf7d24984dd46901e04e7
  • fabric-sdk-node commit level: 974bafcb1059c4cb8dda54a9e9d0afc6d87854c5
  • fabric-ca commit level: 74f8f4d4c29e45a79a8849efb057dbd8de3ae8d0
  • PTE commit level: 359dbfb39f507a737ad52129ac0e4fac9cc03c0b

Future items

  • Endorsement policy is not supported yet.
  • Replace fabric-sdk-node with fabric-client and fabric-ca-client.

Prerequisites

To build and test the following prerequisites must be installed first:

  • node and npm lts/boron release (v6.10.x and v3.10.x)
    • node v7 is not currently supported
  • gulp command
    • npm install -g gulp
  • go (v1.7 or later)
  • others:
    • in Ubuntu: apt install -y build-essential python libltdl-dev
    • or refer to your distribution's repository

If planning to run your Fabric network locally, you'll need docker and a bit more. See Hyperledger Fabric - Getting Started for details. `

Setup

  1. Download fabric-test sources:

    • go get -d github.com/hyperledger/fabric-test
  2. Download or update fabric, fabric-ca, and fabric-sdk-node sources, see Hyperledger fabric-test for details:

    • cd $GOPATH/src/github.com/hyperledger/fabric-test
    • if first time:
      • git submodule update --init --recursive
      • git submodule foreach git pull origin master
    • else:
      • git submodule foreach git pull origin master
  3. Obtain appropriate docker images:

    Optionally, you may choose to skip this step of obtaining fabric and fabric-ca images if plan to run PTE against a remote Fabric network. See Creating a local Fabric network for additional information on this.

    • fabric
      • download from dockerhub:
        • cd $GOPATH/src/github.com/hyperledger/fabric-test/fabric/scripts
        • If testing v1.0.0: ./bootstrap-1.0.0.sh
      • build images yourself (v1.0.0 shown here):
        • cd $GOPATH/src/github.com/hyperledger/fabric-test/fabric/
        • git checkout v1.0.0
        • make docker
    • fabric-ca
      • cd $GOPATH/src/github.com/hyperledger/fabric-test/fabric-ca
      • git checkout v1.0.0
      • make docker
    • fabric-sdk-node
      • cd $GOPATH/src/github.com/hyperledger/fabric-test/fabric-sdk-node
      • If testing v1.0.0: git checkout v1.0.0
      • npm install
        • you should be able to safely ignore any warnings
      • gulp ca
  4. Install PTE:

    • cd $GOPATH/src/github.com/hyperledger/fabric-test/tools
    • cp -r PTE $GOPATH/src/github.com/hyperledger/fabric-test/fabric-sdk-node/test
  5. Create Service Credentials file(s) for your Fabric network:

    • See the examples in SCFiles and change the address to your own Fabric addresses and credentials. Add a block for each organization and peer, ensuring correctness.
  6. Specify run scenarios:

    • Create your own version of PTEMgr.txt (if use pte_mgr.sh), runCases.txt and User Input json files, according to the test requirements. Use the desired chaincode name, channel name, organizations, etc. Using the information in your own network profiles, remember to "create" all channels, "join" channel, and "install" and "instantiate" chaincode for each org, to ensure all peers are set up correctly. Additional information can be found below.

Running PTE

Before attempting to run PTE ensure your network is running! If you do not have access to a Fabric network, please see the section on Creating a local Fabric network.

Usage

There are two ways to execute PTE: pte_mgr.sh and pte_driver.sh. pte_mgr.sh can be used to manage multiple PTEs while pte_driver.sh can only manage one PTE.

  • pte_mgr.sh

    `./pte_mgr.sh <PTE mgr input file>`
    
    • Example

      ./pte_mgr.sh sampleccInputs/PTEMgr.txt

      sampleccInputs/PTEMgr.txt contains the list of user specified run cases to be executed. Each line is a PTE run case and includes two parameters: driver type and run case file.

      For instance, a PTE mgr file containing two run cases files would be:

        driver=pte sampleccInputs/runCases-constant-i-TLS.txt
        driver=pte sampleccInputs/runCases-constant-q-TLS.txt
      

      Note: Available driver type is pte only.

  • pte_driver.sh

    ./pte_driver.sh <run cases file>

    • Example

      ./pte_driver.sh sampleccInputs/runCases.txt

      sampleccInputs/runCases.txt contains the list of test cases to be executed. Each line is a test case and includes two parameters: SDK type and user input file.

      For instance, a run cases file containing three test cases using the node SDK would be:

        sdk=node sampleccInputs/samplecc-chan1-i-TLS.json
        sdk=node sampleccInputs/samplecc-chan2-i-TLS.json
        sdk=node sampleccInputs/samplecc-chan3-i-TLS.json
      

      Note: Available SDK types are node, go, python and java; however, only the node SDK is currently supported.

    See User Input file in the Reference section below for more information about these files.

Transaction Execution

A single test case is described by a user input file. User input files define all the parameters for executing a test; including transaction type, number of processes, number of transactions, duration, etc. All processes in one test case will concurrently execute the specified transaction. Different transactions may be used in different test cases and then combined into a single run cases file, making it possible to create more complicated scenarios. For example, in a single run of PTE, a user could send a specific number of invokes to all peers and then query each peer separately.

  • Transaction Execution Control

    The transaction can be executed with either transaction number or run time duration. They are controlled by two user input parameters nRequest and runDur. See User Input file in the Reference section below on how to control transaction execution using these two parameters.

Transaction Type

  • Invoke (move)

    To execute invoke (move) transactions, set the transType to Invoke and invokeType to Move, and specify the network parameters and desired execution parameters:

      "invokeCheck": "TRUE",
      "transMode": "Constant",
      "transType": "Invoke",
      "invokeType": "Move",
      "targetPeers": "OrgAnchor",
      "nProcPerOrg": "4",
      "nRequest": "1000",
      "runDur": "600",
      "TLS": "Enabled",
    

    And set the channel name in channelOpt:

      "channelOpt": {
          "name": "testchannel1",
          "channelTX": "/root/gopath/src/github.com/hyperledger/fabric-test/fabric/common/tools/cryptogen/crypto-config/ordererOrganizations/testorgschannel1.tx",
          "action":  "create",
          "orgName": [
              "testOrg1"
          ]
      },
    
  • Invoke (query)

    To execute invoke (move) transactions, set the transType to Invoke and invokeType to Query, and specify the network parameters and desired execution parameters:

      "invokeCheck": "TRUE",
      "transMode": "Constant",
      "transType": "Invoke",
      "invokeType": "Query",
      "targetPeers": "OrgAnchor",
      "nProcPerOrg": "4",
      "nRequest": "1000",
      "runDur": "600",
      "TLS": "Enabled",
    

    And set the channel name in channelOpt:

      "channelOpt": {
          "name": "testchannel1",
          "channelTX": "/root/gopath/src/github.com/hyperledger/fabric-test/fabric/common/tools/cryptogen/crypto-config/ordererOrganizations/testorgschannel1.tx",
          "action":  "create",
          "orgName": [
              "testOrg1"
          ]
      },
    

Sample Use Cases

  • Latency

    Example: sampleccInputs/samplecc-latency-i.json Performs 1000 invokes (Move) with 1 process on 1 network using the sample_cc chaincode. The average of the execution result (execution time (ms)/1000 transactions) represents the latency of 1 invoke (Move).
  • Long run

    Example: sampleccInputs/samplecc-longrun-i.json Performs invokes (Move) of various payload size ranging from 1kb-2kb with 1 processes on one network using sample_cc chaincode for 72 hours at 1 transaction per second.
  • Concurrency

    Example: sampleccInputs/samplecc-concurrency-i.json Performs invokes (Move) of 1kb payload with 50 processes on one 4-peer network using sample_cc chaincode for 10 minutes.
  • Complex

    Example: sampleccInputs/samplecc-complex-i.json Performs invokes (Move) of various payload size ranging from 10kb-500kb with 10 processes on one 4-peer network using sample_cc chaincode for 10 minutes. Each invoke (Move) is followed by an invoke (Query).
  • More complicated scenarios

    • For multiple chaincodes deployments and transactions, configure each user input file to install and instantiate chaincodes and drive the transactions appropriately.
    • For a stress test on a single network, set all SCFiles to same network. Then concurrent execution of the test is performed against the network but with the workload specified in each user input file.
    • For a density test, configure config json in SCFiles, create run cases files, and user input files for each network. Then execute pte_mgr.sh against these run cases files.

Additional Use Cases

Although PTE's primary use case is to drive transactions into a Fabric network, it can be used for creating and joining channels, and chaincode installation and instantiation. This gives the ability for more complete end-to-end scenarios.

  • Channel Operations

    For any channel activities (create or join), set transType to Channel:

      "transMode": "Constant",
      "transType": "Channel",
      "invokeType": "Move",
    
    • Create a channel

      To create a channel, set the action in channelOpt to create, and set the name to the channel name. Note that orgName is ignored in this operation:

        "channelOpt": {
            "name": "testchannel1",
            "channelTX": "/root/gopath/src/github.com/hyperledger/fabric-test/fabric/common/tools/cryptogen/crypto-config/ordererOrganizations/testorgschannel1.tx",
            "action":  "create",
            "orgName": [
                "testOrg1"
            ]
        },
      
    • Join a channel

      To join all peers in an org to a channel, set the action in channelOpt to join, set name to channel name, and set orgName to the list of orgs to join:

        "channelOpt": {
            "name": "testchannel1",
            "channelTX": "/root/gopath/src/github.com/hyperledger/fabric-test/fabric/common/tools/cryptogen/crypto-config/ordererOrganizations/testorgschannel1.tx",
            "action":  "join",
            "orgName": [
                "testOrg1"
            ]
        },
      
  • Chaincode Operations

    For chaincode setup (install or instantiate) set deploy according to the test. For example:

      "deploy": {
          "chaincodePath": "github.com/hyperledger/fabric-test/fabric-sdk-node/test/fixtures/src/github.com/sample_cc",
          "fcn": "init",
          "args": []
      },
    

    In above example, a default endorsement policy of "a signature by any member from any of the organizations corresponding to the array of member service providers" is used. If the test need a specific endorsement policy when chaincode instantiate, the 'endorsement' section need be configured like below format:

       "deploy": {
           "chaincodePath": "github.com/hyperledger/fabric-sdk-node/test/fixtures/src/github.com/sample_cc",
           "fcn": "init",
           "endorsement": {
                         "identities": [
                          { "role": { "name": "member", "mspId": "Org1MSP" }},
                          { "role": { "name": "member", "mspId": "Org2MSP" }}
                             ],
                         "policy": {
                            "2-of": [{ "signed-by": 0 }, { "signed-by": 1 }]
                           }
                        },
          "args": []
      },
    

    The policy syntax definition in : Polciy Specification

    • Install a chaincode

      To install a chaincode, set the transType to install:

        "transMode": "Constant",
        "transType": "install",
        "invokeType": "Move",
      

      And set channelOpt name to the channel name and orgName to a list of org names:

        "channelOpt":
            "name":  "testchannel1",
            "channelTX": "/root/gopath/src/github.com/hyperledger/fabric-test/fabric/common/tools/cryptogen/crypto-config/ordererOrganizations/testorgschannel1.tx",
            "action":  "create",
            "orgName": [
                "testOrg1"
            ]
        },
      

      Note that action is ignored.

    • Instantiate a chaincode

      To instantiate a chaincode, set the transType to instantiate:

        "transMode": "Constant",
        "transType": "instantiate",
        "invokeType": "Move",
      

      and set channelOpt name to the channel name and specify the list of organizations that the chaincode will be instantiated:

        "channelOpt": {
            "name":  "testchannel1",
            "channelTX": "/root/gopath/src/github.com/hyperledger/fabric-test/fabric/common/tools/cryptogen/crypto-config/ordererOrganizations/testorgschannel1.tx",
            "action":  "create",
            "orgName": [
                "testOrg1",
                "testOrg2"
            ]
        },
      

      Note that action is ignored. PTE instantiates chaincode on all peers of each organization listed in channelOpt.orgName.

      Recommendation: instantiate a chaincode on the organization before sending a transaction to any peer of that organization.

  • Query Blockchain Height Operations

    For any query blockchain height activities (query block), set transType to QueryBlock:

      "transMode": "Constant",
      "transType": "QueryBlock",
      "invokeType": "Move",
    
    • Query Blockchain height

      To query the length (number of transactions) in blocks, set org, peer, startBlock, and endBlock in queryBlockOpt:

        "queryBlockOpt": {
            "org":  "org1",
            "peer":  "peer1",
            "startBlock":  "195",
            "endBlock":  "200"
        },
      

      The following is the output with startBlock=195 and endBlock=200. The output includes the block height and the number of transactions from startBlock to endBlock.

        info: [PTE 0 main]: [queryBlockchainInfo] Channel queryInfo() returned block height=202
        info: [PTE 0 main]: [queryBlockchainInfo] block:Length:accu length= 195:10:10
        info: [PTE 0 main]: [queryBlockchainInfo] block:Length:accu length= 196:10:20
        info: [PTE 0 main]: [queryBlockchainInfo] block:Length:accu length= 197:10:30
        info: [PTE 0 main]: [queryBlockchainInfo] block:Length:accu length= 198:10:40
        info: [PTE 0 main]: [queryBlockchainInfo] block:Length:accu length= 199:10:50
        info: [PTE 0 main]: [queryBlockchainInfo] block:Length:accu length= 200:10:60
        info: [PTE 0 main]: [queryBlockchainInfo] blocks= 195:200, totalLength= 60
      

Chaincodes

The following chaincodes are tested and supported:

  • example02: This is a simple chaincode with limited capability. This chaincode is NOT suitable for performance benchmark.

  • sample_cc: This chaincode supports variable (randomized) payload sizes and performs encryption and decryption on the payload. Specify ccType as ccchecker when using this chaincode. See directory sampleccInputs for examples related to this chaincode. This chaincode is available in $GOPATH/src/github.com/hyperledger/fabric-test/chaincodes/samplecc/go. Set the deploy.chaincodePath to this directory in the user input file.

      "deploy": {
          "chaincodePath": "github.com/hyperledger/fabric-test/chaincodes/samplecc/go",
          "fcn": "init",
          "args": []
      },
    
  • marbles_cc: Marbles chaincode. PTE alters the marble name (the first argument) and the marble size (the third argument) for each initMarble transaction. Specify ccType as marblescc when using this chaincode. See directory marblesccInputs for examples related to this chaincode. This chaincode is available in $GOPATH/src/github.com/hyperledger/fabric-test/fabric/examples/chaincode/go/marbles02. Set the deploy.chaincodePath to this directory in the user input file.

      "deploy": {
          "chaincodePath": "github.com/hyperledger/fabric-test/fabric/examples/chaincode/go/marbles02",
          "fcn": "init",
          "args": []
      },
    
  • sample_js: This is the Node JS chaincode of sample_cc. See directory samplejsInputs for examples related to this chaincode. This chaincode is available in $GOPATH/src/github.com/hyperledger/fabric-test/chaincodes/samplecc/node. Set the deploy.chaincodePath to this directory in the user input file.

      "deploy": {
          "chaincodePath": "github.com/hyperledger/fabric-test/chaincodes/samplecc/node",
          "fcn": "init",
          "language": "node",
          "args": []
      },
    

Output

  • Statistical Output Message

    The statistical output message includes PTE id, network id, channel name, org name, process id, transaction type, total transactions received and sent, elapsed time, starting time, ending time, and number of un-received events.

    For example, the following is the statistical output message for a test case with 4 processes.

      info: [PTE 0 main]: stdout: info: [PTE 0 exec]: [Nid:chan:org:id=0:testorgschannel1:org2:0 eventRegister] completed Rcvd(sent)=1000(1000) Invoke(Move) in 46199 ms, timestamp: start 1508185534030 end 1508185580229, #event timeout: 0
      info: [PTE 0 main]: stdout: info: [PTE 0 exec]: [Nid:chan:org:id=0:testorgschannel1:org2:1 eventRegister] completed Rcvd(sent)=1000(1000) Invoke(Move) in 46266 ms, timestamp: start 1508185533969 end 1508185580235, #event timeout: 0
      info: [PTE 0 main]: stdout: info: [PTE 0 exec]: [Nid:chan:org:id=0:testorgschannel1:org1:0 eventRegister] completed Rcvd(sent)=1000(1000) Invoke(Move) in 54232 ms, timestamp: start 1508185533962 end 1508185588194, #event timeout: 0
      info: [PTE 0 main]: stdout: info: [PTE 0 exec]: [Nid:chan:org:id=0:testorgschannel1:org1:1 eventRegister] completed Rcvd(sent)=1000(1000) Invoke(Move) in 54613 ms, timestamp: start 1508185533985 end 1508185588598, #event timeout: 0
    
  • Completed Message

    For each process, One message of pte-exec:completed is logged in PTE output upon the status of completion of each process. For each pte_driver.sh (each line in runCase.txt) execution, one message of pte-main:completed is logged in the PTE output upon completion of all associated pte_driver.sh.

    • pte-main:completed For each runCases.txt, a pte-main:completed message is logged in PTE output.

    • pte-exec:completed If PTE completed normally, then the message pte-exec:completed is logged.

    • pte-exec:completed:timeout If PTE completed but with any event timeout, then the message pte-exec:completed:timeout is logged.

    • pte-exec:completed:error If PTE exits due to any error, then the message pte-exec:completed:error is logged.

    For example, if pte_mgr.sh is executed with a mgr.txt contains:

      driver=pte CITest/FAB-3832-4i/samplecc/runCases-FAB-3832-4i1-TLS.txt
    

    and runCases-FAB-3832-4i1-TLS.txt contains

      sdk=node CITest/FAB-3832-4i/samplecc/samplecc-chan1-FAB-3832-4i-TLS.json
    

    and samplecc-chan1-FAB-3832-4i-TLS.json contains

      ...
      "nProcPerOrg": "2",
      ...
      "channelOpt": {
          ...
          "orgName": [
              "org1",
              "org2"
          ]
      },
    

    Then there will be 4 pte-exec:completed messages since there are 4 processes, 2 org and 2 processes per org. And there will be 1 pte-main:completed since 1 pte_driver.sh is executed (only one line of sdk=node in runCases.txt). The completed message will be as follow:

      info: [PTE 0 main]: stdout: info: [PTE 0 exec]: [Nid:chan:org:id=0:testorgschannel1:org2:0 eventRegister] pte-exec:completed
      info: [PTE 0 main]: stdout: info: [PTE 0 exec]: [Nid:chan:org:id=0:testorgschannel1:org2:1 eventRegister] pte-exec:completed
      info: [PTE 0 main]: stdout: info: [PTE 0 exec]: [Nid:chan:org:id=0:testorgschannel1:org1:0 eventRegister] pte-exec:completed
      info: [PTE 0 main]: stdout: info: [PTE 0 exec]: [Nid:chan:org:id=0:testorgschannel1:org1:1 eventRegister] pte-exec:completed
      info: [PTE 0 main]: [performance_main] pte-main:completed
    

    When the transmode is CONSTANT, the latency metrics for proposal, transaction and event of each process are provided. Where

     * **proposal**: the time between the prosoal is sent to peers and the response is received.
     * **transaction**: the time between the transaction is sent to orderer and response is received.
     * **event**: the time between the event is registered, the transaction is sent to orderer, and the event is received.
    

    The output of the latency metrics include average, minimum, and maximum of all transactions for that process. The following is an example of the output with two processes, one targets org1 and one targets org2 with 1000 transactions each:

      info: [PTE 0 main]: stdout: info: [PTE 0 exec]: [Nid:chan:org:id=0:testorgschannel1:org1:0 latency_output] peer latency stats: tx num= 1000, total time: 10240 ms, avg= 10.24 ms, min= 5 ms, max= 92 ms
      info: [PTE 0 main]: stdout: info: [PTE 0 exec]: [Nid:chan:org:id=0:testorgschannel1:org1:0 latency_output] orderer latency stats: tx num= 1000, total time: 8735 ms, avg= 8.73 ms, min= 4 ms, max= 79 ms
      info: [PTE 0 exec]: [Nid:chan:org:id=0:testorgschannel1:org1:0 latency_output] event latency stats: tx num= 1000, total time: 837918 ms, avg= 837.92 ms, min= 307 ms, max= 2130 ms
    
      info: [PTE 0 main]: stdout: info: [PTE 0 exec]: [Nid:chan:org:id=0:testorgschannel1:org2:0 latency_output] peer latency stats: tx num= 1000, total time: 9991 ms, avg= 9.99 ms, min= 5 ms, max= 111 ms
      info: [PTE 0 main]: stdout: info: [PTE 0 exec]: [Nid:chan:org:id=0:testorgschannel1:org2:0 latency_output] orderer latency stats: tx num= 1000, total time: 9128 ms, avg= 9.13 ms, min= 4 ms, max= 126 ms
      info: [PTE 0 exec]: [Nid:chan:org:id=0:testorgschannel1:org2:0 latency_output] event latency stats: tx num= 1000, total time: 828433 ms, avg= 828.43 ms, min= 284 ms, max= 2195 ms
    

Reference

User Input file

{
    "channelID": "_ch1",
    "chaincodeID": "sample_cc",
    "chaincodeVer": "v0",
    "logLevel": "ERROR",
    "invokeCheck": "TRUE",
    "transMode": "Constant",
    "transType": "Invoke",
    "invokeType": "Move",
    "targetPeers": "OrgAnchor",
    "peerFailover": "TRUE",
    "ordererFailover": "TRUE",
    "nProcPerOrg": "4",
    "nRequest": "0",
    "runDur": "600",
    "TLS": "enabled",
    "queryBlockOpt": {
        "org":  "org1",
        "peer":  "peer1",
        "startBlock":  "6590",
        "endBlock":  "6800"
    },
    "channelOpt": {
        "name": "testchannel1",
        "channelTX": "/root/gopath/src/github.com/hyperledger/fabric-test/fabric/common/tools/cryptogen/crypto-config/ordererOrganizations/testorgschannel1.tx",
        "action":  "create",
        "orgName": [
            "org1"
        ]
    },
    "burstOpt": {
        "burstFreq0":  "500",
        "burstDur0":  "3000",
        "burstFreq1": "2000",
        "burstDur1": "10000"
    },
    "mixOpt": {
        "mixFreq": "2000"
    },
    "constantOpt": {
        "recHIST": "HIST",
        "constFreq": "1000",
        "devFreq": "300"
    },
    "listOpt": {
        "org1": ["peer1"],
        "org2": ["peer1"]
    },
    "eventOpt": {
        "type": "Channel",
        "listener": "Transaction",
        "timeout": "240000"
    },
    "failoverOpt": {
        "method": "RoundRobin",
        "list": "targetPeers"
    },
    "ccType": "general",
    "ccOpt": {
        "keyIdx": [1],
        "keyPayLoad": [2],
        "keyStart": "5000",
        "payLoadType": "Random",
        "payLoadMin": "1024",
        "payLoadMax": "2048"
    },
    "deploy": {
        "chaincodePath": "github.com/hyperledger/fabric-test/fabric-sdk-node/test/fixtures/src/github.com/sample_cc",
        "fcn": "init",
        "language": "golang"
        "args": []
    },
    "invoke": {
        "query": {
            "fcn": "invoke",
            "args": ["get", "a"]
        },
        "move": {
            "fcn": "invoke",
            "args": ["put", "a", "string-msg"]
        }
    },
    "SCFile": [
        {"ServiceCredentials":"SCFiles/config-chan1-TLS.json"}
    ]
}

where:

  • channelID: channel ID for the run.

  • chaincodeID: chaincode ID for the run.

  • chaincodeVer: chaincode version.

  • logLevel: logging level for the run. Options are ERROR, DEBUG, or INFO. Set to ERROR for performance test. The default value is ERROR.

  • invokeCheck: if this is TRUE, then a query will be executed for the last invoke upon the receiving of the event of the last invoke. This value is ignored for query test.

  • transMode: transaction mode

    • Simple: one transaction type and rate only, the subsequent transaction is sent when the response of sending transaction (not the event handler), success or failure, of the previous transaction is received
    • Burst: various traffic rates, see burstOpt for detailed
    • Mix: mix invoke and query transactions, see mixOpt for detailed
    • Constant: the transactions are sent by the specified rate, see constantOpt for detailed
    • Latency: one transaction type and rate only, the subsequent transaction is sent when the event message (ledger update is completed) of the previous transaction is received
  • transType: transaction type

    • Channel: channel activities specified in channelOpt.action
    • Install: install chaincode
    • Instantiate: instantiate chaincode
    • QueryBlock: query blockchain information
    • Invoke: invokes transaction
  • peerFailover: if this parameter is set to TRUE and if the transaction cannot be delivered to the targeted peer, then PTE will send the transaction to the next peer in the peer list, and so on. The peer list consists of all peers in the configuration json.

  • ordererFailover: if this parameter is set to TRUE and if the transaction cannot be delivered to the targeted orderer, then PTE will send the transaction to the next orderer in the orderer list, and so on. The orderer list consists of all orderers in the configuration json.

  • invokeType: invoke transaction type. This parameter is valid only if the transType is set to invoke

    • Move: move transaction
    • Query: query transaction
  • targetPeers: the target peers that transactions will sent to

    • OrgAnchor: send to the anchor peer (peer1) of the organization being executed in the current process
    • AllAnchors: send to the anchor peers of all organizations
    • OrgPeers: send to all peers in the organization being executed in the current process
    • AllPeers: send to all peers in all organizations
    • List: only send to the peers given in listOpt, see listOpt below for details
  • nProcPerOrg: number of processes for the test

  • nRequest: number of transactions to be executed for each process

  • runDur: run duration in seconds to be executed for each process.

    • if nRequest is non-zero the nRequest is executed.
    • if nRequest is zero and runDur is non-zero, then runDur is executed.
    • if both nRequest and runDur are zero, then PTE runs forever.
  • TLS: TLS setting for the test: Disabled or Enabled.

  • queryBlock: query blockchain information options

    • org: the org to be queried
    • peer: the peer to be queried
    • startBlock: the starting block
    • endBlock: the ending block. If the the ending block is greater than the chain height in the peer, eBlock will be set to the chain height.
  • channelOpt: transType channel options

    • name: channel name
    • channelTX: channel transaction file
    • action: channel action: create or join
    • orgName: name of organization for the test
  • burstOpt: the frequencies and duration for Burst transaction mode traffic. Currently, two transaction rates are supported. The traffic will issue one transaction every burstFreq0 ms for burstDur0 ms, then one transaction every burstFreq1 ms for burstDur1 ms, then the pattern repeats. These parameters are valid only if the transMode is set to Burst.

    • burstFreq0: frequency in ms for the first transaction rate
    • burstDur0: duration in ms for the first transaction rate
    • burstFreq1: frequency in ms for the second transaction rate
    • burstDur1: duration in ms for the second transaction rate
  • mixOpt: each invoke is followed by a query on every process. This parameter is valid only the transMode is set to Mix.

  • mixFreq: frequency in ms for the transaction rate. This value should be set based on the characteristics of the chaincode to avoid the failure of the immediate query.

  • constantOpt: the transactions are sent at the specified rate. This parameter is valid only the transMode is set to Constant.

    • recHist: This parameter indicates if brief history of the run will be saved. If this parameter is set to HIST, then the output is saved into a file, namely ConstantResults.txt, under the current working directory. Otherwise, no history is saved.
    • constFreq: frequency in ms for the transaction rate.
    • devFreq: deviation of frequency in ms for the transaction rate. A random frequency is calculated between constFrq-devFreq and constFrq+devFreq for the next transaction. The value is set to default value, 0, if this value is not set in the user input json file. All transactions are sent at constant rate if this number is set to 0.
  • listOpt: targetPeers list of the peers that the transactions are sent. These parameters are valid only when the targetPeers is set to List. Each line includes two parameters: org name and peer array within the org, for example:

           "listOpt": {
               "org1": ["peer1","peer2"],
               "org3": ["peer1"],
               "org6": ["peer3"]
           }
    
  • eventOpt: event hub options

    • type: event type, default: Peer
      • Channel: events at channel level
      • Peer: events at peer level
    • listener: event listener, default: Transaction
      • Transaction: PTE registers a transaction listener to receive a registered transaction event. This is the default event listener.
      • Block: PTE registers a block listener to receive every block event on all channels. PTE will parse the received block event for the transactions sent. The block listener option applies to tranMode CONSTANT only.
      • None: PTE will not register any event listener.
    • timeout: event timeout, applied to the transaction listener only, unit ms, default: 120000 ms
  • failoverOpt: peer failover options

    • method: peer failover selection method, default is RoundRobin
      • random: a peer is selected randomly from the list for failover
      • RoundRobin: the peer listed next to the current peer is selected for failover
    • list: peer failover candidate list, default is targetPeers
      • targetPeers: the peer candidate list is the same as the peers specified in the targetPeers
      • all: the peer candidate list is made of all peers listed in the associated service confidential file
  • ccType: chaincode type

    • ccchecker: The first argument (key) in the query and invoke request is incremented by 1 for every transaction. The prefix of the key is made of process ID, ex, all keys issued from process 4 will have prefix of key3_. And, the second argument (payload) in an invoke (Move) is a random string of size ranging between payLoadMin and payLoadMax defined in ccOpt.
    • general: The arguments of transaction request are taken from the user input json file without any changes.
  • ccOpt: chaincode options, see ccOpt and invoke.query and invoke.move in marblesccInputs/marblescc-chan1-constant-i-TLS.json as an example on how to keyIdx and keyPayLoad below.

    • keyIdx: a list of indexes of transaction argument used as keys
    • keyPayLoad: a list of indexes of transaction argument used as payload
    • keyStart: the starting transaction key index, this is used when the ccType is non general which requires a unique key for each invoke.
    • payLoadType: payload type
      • Fixed: fixed payload with the size of payLoadMin for every trandsaction
      • Random: random payload with a random size between payLoadMin and payLoadMax for every transaction
    • payLoadMin: minimum size in bytes of the payload
    • payLoadMax: maximum size in bytes of the payload
  • deploy: deploy transaction contents

    • language: the chaincode language including:
      • golang: golang chaincode, this is the default language
      • node: Node JS chaincode
  • invoke invoke transaction contents

    • query: query content
    • move: move content
  • SCFile: the service credentials json.

Service Credentials file

The service credentials contain the information of the network and are stored in the SCFiles directory. The following is a sample of the service credentials json file:

{
    "test-network": {
        "orderer": {
                "name": "OrdererMSP",
                "mspid": "OrdererMSP",
                "mspPath": "./crypto-config",
                "adminPath": "./crypto-config/ordererOrganizations/example.com/users/[email protected]/msp",
                "comName": "example.com",
                "url": "grpcs://localhost:5005",
                "server-hostname": "orderer0.example.com",
                "tls_cacerts": "./crypto-config/ordererOrganizations/example.com/orderers/orderer0.example.com/msp/cacerts/ca.example.com-cert.pem"
        },
        "org1": {
                "name": "Org1MSP",
                "mspid": "Org1MSP",
                "mspPath": "./crypto-config",
                "adminPath": "./crypto-config/peerOrganizations/org1.example.com/users/[email protected]/msp",
                "comName": "example.com",
                "ca": {
                     "url":"https://localhost:7054",
                     "name": "ca-org1"
                },
                "username": "admin",
                "secret": "adminpw",
                "peer1": {
                        "requests": "grpc://localhost:7061",
                        "events": "grpc://localhost:7051",
                        "server-hostname": "peer0.org1.example.com",
                        "tls_cacerts": "../fixtures/tls/peers/peer0/ca-cert.pem"
                },
                "peer2": {
                        "requests": "grpc://localhost:7062",
                        "events": "grpc://localhost:7052",
                        "server-hostname": "peer1.org1.example.com",
                        "tls_cacerts": "../fixtures/tls/peers/peer0/ca-cert.pem"
                }
        },
        "org2": {
                "name": "Org2MSP",
                "mspid": "Org2MSP",
                "mspPath": "./crypto-config",
                "adminPath": "./crypto-config/peerOrganizations/org2.example.com/users/[email protected]/msp",
                "comName": "example.com",
                "ca": {
                     "url":"https://localhost:8054",
                     "name": "ca-org2"
                },
                "username": "admin",
                "secret": "adminpw",
                "peer1": {
                        "requests": "grpcs://localhost:7063",
                        "events": "grpcs://localhost:7053",
                        "server-hostname": "peer0.org2.example.com",
                        "tls_cacerts": "./crypto-config/peerOrganizations/org2.example.com/peers/peer0.org2.example.com/msp/cacerts/ca.org2.example.com-cert.pem"
                },
                "peer2": {
                        "requests": "grpcs://localhost:7064",
                        "events": "grpcs://localhost:7054",
                        "server-hostname": "peer1.org2.example.com",
                        "tls_cacerts": "./crypto-config/peerOrganizations/org2.example.com/peers/peer1.org2.example.com/msp/cacerts/ca.org2.example.com-cert.pem"
                }
        }
    }
}

Creating a local Fabric network

  • If you do not yet have the Fabric docker images in your local docker registry, please either build them from Fabric source or download them from dockerhub.
    • cd $GOPATH/src/github.com/hyperledger/fabric-test/fabric/examples/e2e_cli/
    • sh ./download-dockerimages.sh -c x86_64-1.0.0 -f x86_64-1.0.0
  • If you do not have an existing network already, you can start a network using the Fabric e2e example:
    • cd $GOPATH/src/github.com/hyperledger/fabric-test/fabric/examples/e2e_cli/

    • Edit network_setup.sh

      • change COMPOSE_FILE to

        COMPOSE_FILE=docker-compose-e2e.yaml

      • comment out docker logs -f cli

    • ./network_setup.sh up

  • Alternatively, consider using the NetworkLauncher tool:
    • cd $GOPATH/src/github.com/hyperledger/
    • git clone https://github.com/hyperledger/fabric-test
    • cd tools/NL
    • ./networkLauncher.sh -?

CI Test

A set of predefined tests are designed for CI daily or weekly execution and are available in the directory, CITest, under PTE.

Remote PTE

This feature allows user to execute PTE (PTE manager and/or driver) to send transactions from remote hosts to Blockchain networks, see diagram below.

In order to execute PTE remotely, the PTE controller host will need to have access to the remote PTE hosts. In the setup below, ssh auto login without password is illustrated. However, users should choose any preferred remote access method between PTE controller host and remote PTE hosts for their environment.

  • Usage

    ./pte_ctlr.sh <PTE controller file>

    • Example

      ./pte_ctlr.sh ctlrInputs/PTECtlr.txt

      ctlrInputs/PTECtlr.txt contains the list of testcases to be executed on the remote hosts. Each line is a PTE controller case and inlcude three parameters: driver type, user/host, and a script. The available driver type is ctlr only.

      For instance, this sample PTE controller file conatins two control testcases:

        driver=ctlr [email protected] ctlrInputs/remotePTEhost-samplecc-q.sh
        driver=ctlr [email protected] ctlrInputs/remotePTEhost-samplecc-i.sh
      
  • Setup

    • On the local host where the PTE controller resides
      • setup ssh auto login to remote systems without password. Note that users may choose a preferred method for remote access.
      • a PTECtlr.txt file containing the controller testcases, e.g., PTE/ctlrInputs/PTECtlr.txt
      • all controller testcases files, e.g., PTE/ctlrInputs/pteHost11-samplecc-q.sh
    • On the remote host where the PTE manager/driver resides
      • setup PTE
      • contains crypto keys of the Blockchain network
      • a script to execute PTE, e.g., PTE/CITest/scripts/test_driver_remote.sh, Users can create scripts for their testcases.
    • Blockchain network
      • can be a single host or multi hosts network
  • Setup ssh auto login without password

    Note that ssh is just one method for the PTE controller host to access remote PTE. Users should choose a method suitable for their environment.


Creative Commons License
This work is licensed under a Creative Commons Attribution 4.0 International License.

About

No description, website, or topics provided.

Resources

Stars

Watchers

Forks

Releases

No releases published

Packages

No packages published