Alias

Features

• Custom 3D printed keycaps
  • Lever keycaps
  • Low profile DES variant
• Choc v1 and v2 compatible hotswap
• Wireless dongle
• PCB generated in ergogen

Compatibility/Disclaimer

Everything in this repo has been tested. Even so, use these files at your own risk. If you decide to have the pcb fabbed, 1.2mm pcb thickness is recommended. Higher thicknesses are still compatible but add height to the case.

• Status of keycap compatibility: only keycaps that are <=17.85mm wide and <=18mm deep are supported
• Status of bottom case: cutouts are currently only compatible with choc v2 with the exception of the lever keys, which have cutouts that support both choc v1 and v2 fully compatible with both choc v1 and v2

Parts

Part: Model#	Link
Microcontroller: Supermini NRF52840 (or nice!nano)
Battery: 301230 with molex pico ezmate connector
Battery connector: molex pico ezmate 1x02
Power button: PCM12SMTR
Reset button: SKHLLCA010
Choc v1 or v2 switches x 36
Kailh Choc PG1350 Hot Swap Sockets x 36
Keycaps
Magnetic USB connector (optional): Netdot Gen10

Thanks

These people and many more helped make this keyboard possible. Yall are legends.

MrZealot
Pseudoku
petejohanson
caksoylar(bravekarma)
jcmkk3
ceoloide
infused-kim
Flatfootfox
sadekbaroudi
zzeneg
joelspadin
wolfwood
claussen
Geist
rmwphd(atinyzubat)
fish
Araxia
honorless
elkepenin