debian: add extra package build routines #515
Open
Conversation
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
commit b8fc56fbca7482c1e5c0e3351c6ae78982e25ada upstream. ksmbd_user_session_put should be called under smb3_preauth_hash_rsp(). It will avoid freeing session before calling smb3_preauth_hash_rsp(). Cc: [email protected] # v5.15+ Reported-by: Norbert Szetei <[email protected]> Tested-by: Norbert Szetei <[email protected]> Signed-off-by: Namjae Jeon <[email protected]> Signed-off-by: Steve French <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
commit cc6a931d1f3b412263d515fd93b21fc0ca5147fe upstream. The modulo register defines the period of the edge-aligned PWM mode (which is the only mode implemented). The reference manual states: "The EPWM period is determined by (MOD + 0001h) ..." So the value that is written to the MOD register must therefore be one less than the calculated period length. Return -EINVAL if the calculated length is already zero. A correct MODULO value is particularly relevant if the PWM has to output a high frequency due to a low period value. Fixes: 738a1cf ("pwm: Add i.MX TPM PWM driver support") Cc: [email protected] Signed-off-by: Erik Schumacher <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Uwe Kleine-König <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
commit a387e73fedd6307c0e194deaa53c42b153ff0bd6 upstream.
GLINK operates using pre-allocated buffers, aka intents, where incoming
messages are aggregated before being passed up the stack. In the case
that no suitable intents have been announced by the receiver, the sender
can request an intent to be allocated.
The initial implementation of the response to such request dealt
with two outcomes; granted allocations, and all other cases being
considered -ECANCELLED (likely from "cancelling the operation as the
remote is going down").
But on some channels intent allocation is not supported, instead the
remote will pre-allocate and announce a fixed number of intents for the
sender to use. If for such channels an rpmsg_send() is being invoked
before any channels have been announced, an intent request will be
issued and as this comes back rejected the call fails with -ECANCELED.
Given that this is reported in the same way as the remote being shut
down, there's no way for the client to differentiate the two cases.
In line with the original GLINK design, change the return value to
-EAGAIN for the case where the remote rejects an intent allocation
request.
It's tempting to handle this case in the GLINK core, as we expect
intents to show up in this case. But there's no way to distinguish
between this case and a rejection for a too big allocation, nor is it
possible to predict if a currently used (and seemingly suitable) intent
will be returned for reuse or not. As such, returning the error to the
client and allow it to react seems to be the only sensible solution.
In addition to this, commit 'c05dfce0b89e ("rpmsg: glink: Wait for
intent, not just request ack")' changed the logic such that the code
always wait for an intent request response and an intent. This works out
in most cases, but in the event that an intent request is rejected and no
further intent arrives (e.g. client asks for a too big intent), the code
will stall for 10 seconds and then return -ETIMEDOUT; instead of a more
suitable error.
This change also resulted in intent requests racing with the shutdown of
the remote would be exposed to this same problem, unless some intent
happens to arrive. A patch for this was developed and posted by Sarannya
S [1], and has been incorporated here.
To summarize, the intent request can end in 4 ways:
- Timeout, no response arrived => return -ETIMEDOUT
- Abort TX, the edge is going away => return -ECANCELLED
- Intent request was rejected => return -EAGAIN
- Intent request was accepted, and an intent arrived => return 0
This patch was developed with input from Sarannya S, Deepak Kumar Singh,
and Chris Lew.
[1] https://lore.kernel.org/all/[email protected]/
Fixes: c05dfce ("rpmsg: glink: Wait for intent, not just request ack")
Cc: [email protected]
Tested-by: Johan Hovold <[email protected]>
Signed-off-by: Bjorn Andersson <[email protected]>
Reviewed-by: Chris Lew <[email protected]>
Link: https://lore.kernel.org/r/20241023-pmic-glink-ecancelled-v2-1-ebc268129407@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
commit f790a2c494c4ef587eeeb9fca20124de76a1646f upstream. Users should not be able to run these. Reviewed-by: Yang Wang <[email protected]> Signed-off-by: Alex Deucher <[email protected]> (cherry picked from commit 7ba9395430f611cfc101b1c2687732baafa239d5) Cc: [email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
commit 4d75b9468021c73108b4439794d69e892b1d24e3 upstream. Avoid a possible buffer overflow if size is larger than 4K. Reviewed-by: Yang Wang <[email protected]> Signed-off-by: Alex Deucher <[email protected]> (cherry picked from commit f5d873f5825b40d886d03bd2aede91d4cf002434) Cc: [email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
commit b46dadf7e3cfe26d0b109c9c3d81b278d6c75361 upstream. Regular users shouldn't have read access. Reviewed-by: Yang Wang <[email protected]> Signed-off-by: Alex Deucher <[email protected]> (cherry picked from commit c0cfd2e652553d607b910be47d0cc5a7f3a78641) Cc: [email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
commit 3ce3f85787352fa48fc02ef6cbd7a5e5aba93347 upstream. For DPX mode, the number of memory partitions supported should be less than or equal to 2. Fixes: 1589c82 ("drm/amdgpu: Check memory ranges for valid xcp mode") Signed-off-by: Lijo Lazar <[email protected]> Reviewed-by: Hawking Zhang <[email protected]> Signed-off-by: Alex Deucher <[email protected]> (cherry picked from commit 990c4f580742de7bb78fa57420ffd182fc3ab4cd) Cc: [email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
commit a6dd15981c03f2cdc9a351a278f09b5479d53d2e upstream. acpi_evaluate_object() may return AE_NOT_FOUND (failure), which would result in dereferencing buffer.pointer (obj) while being NULL. Although this case may be unrealistic for the current code, it is still better to protect against possible bugs. Bail out also when status is AE_NOT_FOUND. This fixes 1 FORWARD_NULL issue reported by Coverity Report: CID 1600951: Null pointer dereferences (FORWARD_NULL) Signed-off-by: Antonio Quartulli <[email protected]> Fixes: c9b7c809b89f ("drm/amd: Guard against bad data for ATIF ACPI method") Reviewed-by: Mario Limonciello <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Mario Limonciello <[email protected]> Signed-off-by: Alex Deucher <[email protected]> (cherry picked from commit 91c9e221fe2553edf2db71627d8453f083de87a1) Cc: [email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
commit f16beaaee248eaa37ad40b5905924fcf70ae02e3 upstream.
Annotate LMH IRQs with lockdep classes so that the lockdep doesn't
report possible recursive locking issue between LMH and GIC interrupts.
For the reference:
CPU0
----
lock(&irq_desc_lock_class);
lock(&irq_desc_lock_class);
*** DEADLOCK ***
Call trace:
dump_backtrace+0x98/0xf0
show_stack+0x18/0x24
dump_stack_lvl+0x90/0xd0
dump_stack+0x18/0x24
print_deadlock_bug+0x258/0x348
__lock_acquire+0x1078/0x1f44
lock_acquire+0x1fc/0x32c
_raw_spin_lock_irqsave+0x60/0x88
__irq_get_desc_lock+0x58/0x98
enable_irq+0x38/0xa0
lmh_enable_interrupt+0x2c/0x38
irq_enable+0x40/0x8c
__irq_startup+0x78/0xa4
irq_startup+0x78/0x168
__enable_irq+0x70/0x7c
enable_irq+0x4c/0xa0
qcom_cpufreq_ready+0x20/0x2c
cpufreq_online+0x2a8/0x988
cpufreq_add_dev+0x80/0x98
subsys_interface_register+0x104/0x134
cpufreq_register_driver+0x150/0x234
qcom_cpufreq_hw_driver_probe+0x2a8/0x388
platform_probe+0x68/0xc0
really_probe+0xbc/0x298
__driver_probe_device+0x78/0x12c
driver_probe_device+0x3c/0x160
__device_attach_driver+0xb8/0x138
bus_for_each_drv+0x84/0xe0
__device_attach+0x9c/0x188
device_initial_probe+0x14/0x20
bus_probe_device+0xac/0xb0
deferred_probe_work_func+0x8c/0xc8
process_one_work+0x20c/0x62c
worker_thread+0x1bc/0x36c
kthread+0x120/0x124
ret_from_fork+0x10/0x20
Fixes: 53bca37 ("thermal/drivers/qcom: Add support for LMh driver")
Cc: [email protected]
Signed-off-by: Dmitry Baryshkov <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Daniel Lezcano <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
commit 235d2e739fcbe964c9ce179b4c991025662dcdb6 upstream. When creating a cache device, the actual size of the cache origin might be greater than the specified cache target length. In such case, the number of origin blocks should match the cache target length, not the full size of the origin device, since access beyond the cache target is not possible. This issue occurs when reducing the origin device size using lvm, as lvreduce preloads the new cache table before resuming the cache origin, which can result in incorrect sizes for the discard bitset and smq hotspot blocks. Reproduce steps: 1. create a cache device consists of 4096 origin blocks dmsetup create cmeta --table "0 8192 linear /dev/sdc 0" dmsetup create cdata --table "0 65536 linear /dev/sdc 8192" dmsetup create corig --table "0 524288 linear /dev/sdc 262144" dd if=/dev/zero of=/dev/mapper/cmeta bs=4k count=1 oflag=direct dmsetup create cache --table "0 524288 cache /dev/mapper/cmeta \ /dev/mapper/cdata /dev/mapper/corig 128 2 metadata2 writethrough smq 0" 2. reduce the cache origin to 2048 oblocks, in lvreduce's approach dmsetup reload corig --table "0 262144 linear /dev/sdc 262144" dmsetup reload cache --table "0 262144 cache /dev/mapper/cmeta \ /dev/mapper/cdata /dev/mapper/corig 128 2 metadata2 writethrough smq 0" dmsetup suspend cache dmsetup suspend corig dmsetup suspend cdata dmsetup suspend cmeta dmsetup resume corig dmsetup resume cdata dmsetup resume cmeta dmsetup resume cache 3. shutdown the cache, and check the number of discard blocks in superblock. The value is expected to be 2048, but actually is 4096. dmsetup remove cache corig cdata cmeta dd if=/dev/sdc bs=1c count=8 skip=224 2>/dev/null | hexdump -e '1/8 "%u\n"' Fix by correcting the origin_blocks initialization in cache_create and removing the unused origin_sectors from struct cache_args accordingly. Signed-off-by: Ming-Hung Tsai <[email protected]> Fixes: c6b4fcb ("dm: add cache target") Cc: [email protected] Signed-off-by: Mikulas Patocka <[email protected]> Acked-by: Joe Thornber <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
commit 135496c208ba26fd68cdef10b64ed7a91ac9a7ff upstream. An unexpected WARN_ON from flush_work() may occur when cache creation fails, caused by destroying the uninitialized delayed_work waker in the error path of cache_create(). For example, the warning appears on the superblock checksum error. Reproduce steps: dmsetup create cmeta --table "0 8192 linear /dev/sdc 0" dmsetup create cdata --table "0 65536 linear /dev/sdc 8192" dmsetup create corig --table "0 524288 linear /dev/sdc 262144" dd if=/dev/urandom of=/dev/mapper/cmeta bs=4k count=1 oflag=direct dmsetup create cache --table "0 524288 cache /dev/mapper/cmeta \ /dev/mapper/cdata /dev/mapper/corig 128 2 metadata2 writethrough smq 0" Kernel logs: (snip) WARNING: CPU: 0 PID: 84 at kernel/workqueue.c:4178 __flush_work+0x5d4/0x890 Fix by pulling out the cancel_delayed_work_sync() from the constructor's error path. This patch doesn't affect the use-after-free fix for concurrent dm_resume and dm_destroy (commit 6a459d8 ("dm cache: Fix UAF in destroy()")) as cache_dtr is not changed. Signed-off-by: Ming-Hung Tsai <[email protected]> Fixes: 6a459d8 ("dm cache: Fix UAF in destroy()") Cc: [email protected] Signed-off-by: Mikulas Patocka <[email protected]> Acked-by: Joe Thornber <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
commit 792227719725497ce10a8039803bec13f89f8910 upstream.
dm-cache checks the dirty bits of the cache blocks to be dropped when
shrinking the fast device, but an index bug in bitset iteration causes
out-of-bounds access.
Reproduce steps:
1. create a cache device of 1024 cache blocks (128 bytes dirty bitset)
dmsetup create cmeta --table "0 8192 linear /dev/sdc 0"
dmsetup create cdata --table "0 131072 linear /dev/sdc 8192"
dmsetup create corig --table "0 524288 linear /dev/sdc 262144"
dd if=/dev/zero of=/dev/mapper/cmeta bs=4k count=1 oflag=direct
dmsetup create cache --table "0 524288 cache /dev/mapper/cmeta \
/dev/mapper/cdata /dev/mapper/corig 128 2 metadata2 writethrough smq 0"
2. shrink the fast device to 512 cache blocks, triggering out-of-bounds
access to the dirty bitset (offset 0x80)
dmsetup suspend cache
dmsetup reload cdata --table "0 65536 linear /dev/sdc 8192"
dmsetup resume cdata
dmsetup resume cache
KASAN reports:
BUG: KASAN: vmalloc-out-of-bounds in cache_preresume+0x269/0x7b0
Read of size 8 at addr ffffc900000f3080 by task dmsetup/131
(...snip...)
The buggy address belongs to the virtual mapping at
[ffffc900000f3000, ffffc900000f5000) created by:
cache_ctr+0x176a/0x35f0
(...snip...)
Memory state around the buggy address:
ffffc900000f2f80: f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8
ffffc900000f3000: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>ffffc900000f3080: f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8
^
ffffc900000f3100: f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8
ffffc900000f3180: f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8
Fix by making the index post-incremented.
Signed-off-by: Ming-Hung Tsai <[email protected]>
Fixes: f494a9c ("dm cache: cache shrinking support")
Cc: [email protected]
Signed-off-by: Mikulas Patocka <[email protected]>
Acked-by: Joe Thornber <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
commit f484697e619a83ecc370443a34746379ad99d204 upstream. When shrinking the fast device, dm-cache iteratively searches for a dirty bit among the cache blocks to be dropped, which is less efficient. Use find_next_bit instead, as it is twice as fast as the iterative approach with test_bit. Signed-off-by: Ming-Hung Tsai <[email protected]> Fixes: f494a9c ("dm cache: cache shrinking support") Cc: [email protected] Signed-off-by: Mikulas Patocka <[email protected]> Acked-by: Joe Thornber <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
commit c0ade5d98979585d4f5a93e4514c2e9a65afa08d upstream.
Out-of-bounds access occurs if the fast device is expanded unexpectedly
before the first-time resume of the cache table. This happens because
expanding the fast device requires reloading the cache table for
cache_create to allocate new in-core data structures that fit the new
size, and the check in cache_preresume is not performed during the
first resume, leading to the issue.
Reproduce steps:
1. prepare component devices:
dmsetup create cmeta --table "0 8192 linear /dev/sdc 0"
dmsetup create cdata --table "0 65536 linear /dev/sdc 8192"
dmsetup create corig --table "0 524288 linear /dev/sdc 262144"
dd if=/dev/zero of=/dev/mapper/cmeta bs=4k count=1 oflag=direct
2. load a cache table of 512 cache blocks, and deliberately expand the
fast device before resuming the cache, making the in-core data
structures inadequate.
dmsetup create cache --notable
dmsetup reload cache --table "0 524288 cache /dev/mapper/cmeta \
/dev/mapper/cdata /dev/mapper/corig 128 2 metadata2 writethrough smq 0"
dmsetup reload cdata --table "0 131072 linear /dev/sdc 8192"
dmsetup resume cdata
dmsetup resume cache
3. suspend the cache to write out the in-core dirty bitset and hint
array, leading to out-of-bounds access to the dirty bitset at offset
0x40:
dmsetup suspend cache
KASAN reports:
BUG: KASAN: vmalloc-out-of-bounds in is_dirty_callback+0x2b/0x80
Read of size 8 at addr ffffc90000085040 by task dmsetup/90
(...snip...)
The buggy address belongs to the virtual mapping at
[ffffc90000085000, ffffc90000087000) created by:
cache_ctr+0x176a/0x35f0
(...snip...)
Memory state around the buggy address:
ffffc90000084f00: f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8
ffffc90000084f80: f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8
>ffffc90000085000: 00 00 00 00 00 00 00 00 f8 f8 f8 f8 f8 f8 f8 f8
^
ffffc90000085080: f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8
ffffc90000085100: f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8
Fix by checking the size change on the first resume.
Signed-off-by: Ming-Hung Tsai <[email protected]>
Fixes: f494a9c ("dm cache: cache shrinking support")
Cc: [email protected]
Signed-off-by: Mikulas Patocka <[email protected]>
Acked-by: Joe Thornber <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
…_t overflow commit 5a4510c762fc04c74cff264cd4d9e9f5bf364bae upstream. This was found by a static analyzer. There may be a potential integer overflow issue in unstripe_ctr(). uc->unstripe_offset and uc->unstripe_width are defined as "sector_t"(uint64_t), while uc->unstripe, uc->chunk_size and uc->stripes are all defined as "uint32_t". The result of the calculation will be limited to "uint32_t" without correct casting. So, we recommend adding an extra cast to prevent potential integer overflow. Fixes: 18a5bf2 ("dm: add unstriped target") Signed-off-by: Zichen Xie <[email protected]> Signed-off-by: Mikulas Patocka <[email protected]> Cc: [email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
commit dabc44c28f118910dea96244d903f0c270225669 upstream. HP 320 FHD Webcam (03f0:654a) seems to have flaky firmware like other webcam devices that don't like the frequency inquiries. Also, Mic Capture Volume has an invalid resolution, hence fix it to be 16 (as a blind shot). Link: https://bugzilla.suse.com/show_bug.cgi?id=1232768 Cc: <[email protected]> Link: https://patch.msgid.link/[email protected] Signed-off-by: Takashi Iwai <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
[ Upstream commit b5413156bad91dc2995a5c4eab1b05e56914638a ] When cloning a new thread, its posix_cputimers are not inherited, and are cleared by posix_cputimers_init(). However, this does not clear the tick dependency it creates in tsk->tick_dep_mask, and the handler does not reach the code to clear the dependency if there were no timers to begin with. Thus if a thread has a cputimer running before clone/fork, all descendants will prevent nohz_full unless they create a cputimer of their own. Fix this by entirely clearing the tick_dep_mask in copy_process(). (There is currently no inherited state that needs a tick dependency) Process-wide timers do not have this problem because fork does not copy signal_struct as a baseline, it creates one from scratch. Fixes: b787830 ("posix-cpu-timers: Migrate to use new tick dependency mask model") Signed-off-by: Ben Segall <[email protected]> Signed-off-by: Thomas Gleixner <[email protected]> Reviewed-by: Frederic Weisbecker <[email protected]> Cc: [email protected] Link: https://lore.kernel.org/all/[email protected] Signed-off-by: Sasha Levin <[email protected]>
commit dc270d7159699ad6d11decadfce9633f0f71c1db upstream. Fix the following KMSAN warning: CPU: 1 UID: 0 PID: 7651 Comm: cp Tainted: G B Tainted: [B]=BAD_PAGE Hardware name: QEMU Standard PC (Q35 + ICH9, 2009) ===================================================== ===================================================== BUG: KMSAN: uninit-value in decode_getfattr_attrs+0x2d6d/0x2f90 decode_getfattr_attrs+0x2d6d/0x2f90 decode_getfattr_generic+0x806/0xb00 nfs4_xdr_dec_getattr+0x1de/0x240 rpcauth_unwrap_resp_decode+0xab/0x100 rpcauth_unwrap_resp+0x95/0xc0 call_decode+0x4ff/0xb50 __rpc_execute+0x57b/0x19d0 rpc_execute+0x368/0x5e0 rpc_run_task+0xcfe/0xee0 nfs4_proc_getattr+0x5b5/0x990 __nfs_revalidate_inode+0x477/0xd00 nfs_access_get_cached+0x1021/0x1cc0 nfs_do_access+0x9f/0xae0 nfs_permission+0x1e4/0x8c0 inode_permission+0x356/0x6c0 link_path_walk+0x958/0x1330 path_lookupat+0xce/0x6b0 filename_lookup+0x23e/0x770 vfs_statx+0xe7/0x970 vfs_fstatat+0x1f2/0x2c0 __se_sys_newfstatat+0x67/0x880 __x64_sys_newfstatat+0xbd/0x120 x64_sys_call+0x1826/0x3cf0 do_syscall_64+0xd0/0x1b0 entry_SYSCALL_64_after_hwframe+0x77/0x7f The KMSAN warning is triggered in decode_getfattr_attrs(), when calling decode_attr_mdsthreshold(). It appears that fattr->mdsthreshold is not initialized. Fix the issue by initializing fattr->mdsthreshold to NULL in nfs_fattr_init(). Cc: [email protected] # v3.5.x Fixes: 88034c3 ("NFSv4.1 mdsthreshold attribute xdr") Signed-off-by: Roberto Sassu <[email protected]> Signed-off-by: Anna Schumaker <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
commit 3b557be89fc688dbd9ccf704a70f7600a094f13a upstream. The error path in t7xx_dpmaif_rx_buf_alloc(), free and unmap the already allocated and mapped skb in a loop, but the loop condition terminates when the index reaches zero, which fails to free the first allocated skb at index zero. Check with i-- so that skb at index 0 is freed as well. Cc: [email protected] Fixes: d642b01 ("net: wwan: t7xx: Add data path interface") Acked-by: Sergey Ryazanov <[email protected]> Signed-off-by: Jinjie Ruan <[email protected]> Reviewed-by: Ilpo Järvinen <[email protected]> Link: https://patch.msgid.link/[email protected] Signed-off-by: Jakub Kicinski <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
commit 1f26339b2ed63d1e8e18a18674fb73a392f3660e upstream. The scope of the TX skb is wider than just mse102x_tx_frame_spi(), so in case the TX skb room needs to be expanded, we should free the the temporary skb instead of the original skb. Otherwise the original TX skb pointer would be freed again in mse102x_tx_work(), which leads to crashes: Internal error: Oops: 0000000096000004 [#2] PREEMPT SMP CPU: 0 PID: 712 Comm: kworker/0:1 Tainted: G D 6.6.23 Hardware name: chargebyte Charge SOM DC-ONE (DT) Workqueue: events mse102x_tx_work [mse102x] pstate: 20400009 (nzCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : skb_release_data+0xb8/0x1d8 lr : skb_release_data+0x1ac/0x1d8 sp : ffff8000819a3cc0 x29: ffff8000819a3cc0 x28: ffff0000046daa60 x27: ffff0000057f2dc0 x26: ffff000005386c00 x25: 0000000000000002 x24: 00000000ffffffff x23: 0000000000000000 x22: 0000000000000001 x21: ffff0000057f2e50 x20: 0000000000000006 x19: 0000000000000000 x18: ffff00003fdacfcc x17: e69ad452d0c49def x16: 84a005feff870102 x15: 0000000000000000 x14: 000000000000024a x13: 0000000000000002 x12: 0000000000000000 x11: 0000000000000400 x10: 0000000000000930 x9 : ffff00003fd913e8 x8 : fffffc00001bc008 x7 : 0000000000000000 x6 : 0000000000000008 x5 : ffff00003fd91340 x4 : 0000000000000000 x3 : 0000000000000009 x2 : 00000000fffffffe x1 : 0000000000000000 x0 : 0000000000000000 Call trace: skb_release_data+0xb8/0x1d8 kfree_skb_reason+0x48/0xb0 mse102x_tx_work+0x164/0x35c [mse102x] process_one_work+0x138/0x260 worker_thread+0x32c/0x438 kthread+0x118/0x11c ret_from_fork+0x10/0x20 Code: aa1303e0 97fffab6 72001c1f 54000141 (f9400660) Cc: [email protected] Fixes: 2f207cb ("net: vertexcom: Add MSE102x SPI support") Signed-off-by: Stefan Wahren <[email protected]> Link: https://patch.msgid.link/[email protected] Signed-off-by: Jakub Kicinski <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
commit 99635c91fb8b860a6404b9bc8b769df7bdaa2ae3 upstream. The local address entries on userspace_pm_local_addr_list are allocated by sock_kmalloc(). It's then required to use sock_kfree_s() instead of kfree() to free these entries in order to adjust the allocated size on the sk side. Fixes: 24430f8 ("mptcp: add address into userspace pm list") Cc: [email protected] Signed-off-by: Geliang Tang <[email protected]> Reviewed-by: Matthieu Baerts (NGI0) <[email protected]> Signed-off-by: Matthieu Baerts (NGI0) <[email protected]> Link: https://patch.msgid.link/[email protected] Signed-off-by: Jakub Kicinski <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
commit 751ecf6afd6568adc98f2a6052315552c0483d18 upstream. The logic for handling SVE traps manipulates saved FPSIMD/SVE state incorrectly, and a race with preemption can result in a task having TIF_SVE set and TIF_FOREIGN_FPSTATE clear even though the live CPU state is stale (e.g. with SVE traps enabled). This has been observed to result in warnings from do_sve_acc() where SVE traps are not expected while TIF_SVE is set: | if (test_and_set_thread_flag(TIF_SVE)) | WARN_ON(1); /* SVE access shouldn't have trapped */ Warnings of this form have been reported intermittently, e.g. https://lore.kernel.org/linux-arm-kernel/CA+G9fYtEGe_DhY2Ms7+L7NKsLYUomGsgqpdBj+QwDLeSg=JhGg@mail.gmail.com/ https://lore.kernel.org/linux-arm-kernel/[email protected]/ The race can occur when the SVE trap handler is preempted before and after manipulating the saved FPSIMD/SVE state, starting and ending on the same CPU, e.g. | void do_sve_acc(unsigned long esr, struct pt_regs *regs) | { | // Trap on CPU 0 with TIF_SVE clear, SVE traps enabled | // task->fpsimd_cpu is 0. | // per_cpu_ptr(&fpsimd_last_state, 0) is task. | | ... | | // Preempted; migrated from CPU 0 to CPU 1. | // TIF_FOREIGN_FPSTATE is set. | | get_cpu_fpsimd_context(); | | if (test_and_set_thread_flag(TIF_SVE)) | WARN_ON(1); /* SVE access shouldn't have trapped */ | | sve_init_regs() { | if (!test_thread_flag(TIF_FOREIGN_FPSTATE)) { | ... | } else { | fpsimd_to_sve(current); | current->thread.fp_type = FP_STATE_SVE; | } | } | | put_cpu_fpsimd_context(); | | // Preempted; migrated from CPU 1 to CPU 0. | // task->fpsimd_cpu is still 0 | // If per_cpu_ptr(&fpsimd_last_state, 0) is still task then: | // - Stale HW state is reused (with SVE traps enabled) | // - TIF_FOREIGN_FPSTATE is cleared | // - A return to userspace skips HW state restore | } Fix the case where the state is not live and TIF_FOREIGN_FPSTATE is set by calling fpsimd_flush_task_state() to detach from the saved CPU state. This ensures that a subsequent context switch will not reuse the stale CPU state, and will instead set TIF_FOREIGN_FPSTATE, forcing the new state to be reloaded from memory prior to a return to userspace. Fixes: cccb78c ("arm64/sve: Rework SVE access trap to convert state in registers") Reported-by: Mark Rutland <[email protected]> Signed-off-by: Mark Brown <[email protected]> Cc: [email protected] Reviewed-by: Mark Rutland <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Will Deacon <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
commit 81235ae0c846e1fb46a2c6fe9283fe2b2b24f7dc upstream. Although support for SME was merged in v5.19, we've since uncovered a number of issues with the implementation, including issues which might corrupt the FPSIMD/SVE/SME state of arbitrary tasks. While there are patches to address some of these issues, ongoing review has highlighted additional functional problems, and more time is necessary to analyse and fix these. For now, mark SME as BROKEN in the hope that we can fix things properly in the near future. As SME is an OPTIONAL part of ARMv9.2+, and there is very little extant hardware, this should not adversely affect the vast majority of users. Signed-off-by: Mark Rutland <[email protected]> Cc: Ard Biesheuvel <[email protected]> Cc: Catalin Marinas <[email protected]> Cc: Marc Zyngier <[email protected]> Cc: Mark Brown <[email protected]> Cc: Will Deacon <[email protected]> Cc: [email protected] # 5.19 Acked-by: Catalin Marinas <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Will Deacon <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
commit 8c462d56487e3abdbf8a61cedfe7c795a54f4a78 upstream.
SMCCCv1.3 added a hint bit which callers can set in an SMCCC function ID
(AKA "FID") to indicate that it is acceptable for the SMCCC
implementation to discard SVE and/or SME state over a specific SMCCC
call. The kernel support for using this hint is broken and SMCCC calls
may clobber the SVE and/or SME state of arbitrary tasks, though FPSIMD
state is unaffected.
The kernel support is intended to use the hint when there is no SVE or
SME state to save, and to do this it checks whether TIF_FOREIGN_FPSTATE
is set or TIF_SVE is clear in assembly code:
| ldr <flags>, [<current_task>, #TSK_TI_FLAGS]
| tbnz <flags>, #TIF_FOREIGN_FPSTATE, 1f // Any live FP state?
| tbnz <flags>, #TIF_SVE, 2f // Does that state include SVE?
|
| 1: orr <fid>, <fid>, ARM_SMCCC_1_3_SVE_HINT
| 2:
| << SMCCC call using FID >>
This is not safe as-is:
(1) SMCCC calls can be made in a preemptible context and preemption can
result in TIF_FOREIGN_FPSTATE being set or cleared at arbitrary
points in time. Thus checking for TIF_FOREIGN_FPSTATE provides no
guarantee.
(2) TIF_FOREIGN_FPSTATE only indicates that the live FP/SVE/SME state in
the CPU does not belong to the current task, and does not indicate
that clobbering this state is acceptable.
When the live CPU state is clobbered it is necessary to update
fpsimd_last_state.st to ensure that a subsequent context switch will
reload FP/SVE/SME state from memory rather than consuming the
clobbered state. This and the SMCCC call itself must happen in a
critical section with preemption disabled to avoid races.
(3) Live SVE/SME state can exist with TIF_SVE clear (e.g. with only
TIF_SME set), and checking TIF_SVE alone is insufficient.
Remove the broken support for the SMCCCv1.3 SVE saving hint. This is
effectively a revert of commits:
* cfa7ff9 ("arm64: smccc: Support SMCCC v1.3 SVE register saving hint")
* a7c3acc ("arm64: smccc: Save lr before calling __arm_smccc_sve_check()")
... leaving behind the ARM_SMCCC_VERSION_1_3 and ARM_SMCCC_1_3_SVE_HINT
definitions, since these are simply definitions from the SMCCC
specification, and the latter is used in KVM via ARM_SMCCC_CALL_HINTS.
If we want to bring this back in future, we'll probably want to handle
this logic in C where we can use all the usual FPSIMD/SVE/SME helper
functions, and that'll likely require some rework of the SMCCC code
and/or its callers.
Fixes: cfa7ff9 ("arm64: smccc: Support SMCCC v1.3 SVE register saving hint")
Signed-off-by: Mark Rutland <[email protected]>
Cc: Ard Biesheuvel <[email protected]>
Cc: Catalin Marinas <[email protected]>
Cc: Marc Zyngier <[email protected]>
Cc: Mark Brown <[email protected]>
Cc: Will Deacon <[email protected]>
Cc: [email protected]
Reviewed-by: Mark Brown <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Will Deacon <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
commit c9a75ec45f1111ef530ab186c2a7684d0a0c9245 upstream. At insert_delayed_ref() if we need to update the action of an existing ref to BTRFS_DROP_DELAYED_REF, we delete the ref from its ref head's ref_add_list using list_del(), which leaves the ref's add_list member not reinitialized, as list_del() sets the next and prev members of the list to LIST_POISON1 and LIST_POISON2, respectively. If later we end up calling drop_delayed_ref() against the ref, which can happen during merging or when destroying delayed refs due to a transaction abort, we can trigger a crash since at drop_delayed_ref() we call list_empty() against the ref's add_list, which returns false since the list was not reinitialized after the list_del() and as a consequence we call list_del() again at drop_delayed_ref(). This results in an invalid list access since the next and prev members are set to poison pointers, resulting in a splat if CONFIG_LIST_HARDENED and CONFIG_DEBUG_LIST are set or invalid poison pointer dereferences otherwise. So fix this by deleting from the list with list_del_init() instead. Fixes: 1d57ee9 ("btrfs: improve delayed refs iterations") CC: [email protected] # 4.19+ Reviewed-by: Johannes Thumshirn <[email protected]> Signed-off-by: Filipe Manana <[email protected]> Reviewed-by: David Sterba <[email protected]> Signed-off-by: David Sterba <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
commit fb197c5d2fd24b9af3d4697d0cf778645846d6d5 upstream. When alignment handling is delegated to the kernel, everything must be word-aligned in purgatory, since the trap handler is then set to the kexec one. Without the alignment, hitting the exception would ultimately crash. On other occasions, the kernel's handler would take care of exceptions. This has been tested on a JH7110 SoC with oreboot and its SBI delegating unaligned access exceptions and the kernel configured to handle them. Fixes: 736e30a ("RISC-V: Add purgatory") Signed-off-by: Daniel Maslowski <[email protected]> Reviewed-by: Alexandre Ghiti <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Palmer Dabbelt <[email protected]> Signed-off-by: Xiangyu Chen <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
This reverts commit f37319609335d3eb2f7edfec4bad7996668a4d29 which is commit ac35180032fbc5d80b29af00ba4881815ceefcb6 upstream. It should not have been backported here due to lack of other rcu changes in the stable branches. Cc: Johannes Berg <[email protected]> Cc: Miriam Rachel Korenblit <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
…e current and max interface size" This reverts commit c8c590f07ad7ffaa6ef11e90b81202212077497b which is commit 90a695c upstream. Commit c8c590f07ad7 ("selftests/bpf: Implement get_hw_ring_size function to retrieve current and max interface size") will cause the following bpf selftests compilation error in the 6.6 stable branch, and it is not the Stable-dep-of of commit 103c0431c7fb ("selftests/bpf: Drop unneeded error.h includes"). So let's revert commit c8c590f07ad7 to fix this compilation error. ./network_helpers.h:66:43: error: 'struct ethtool_ringparam' declared inside parameter list will not be visible outside of this definition or declaration [-Werror] 66 | int get_hw_ring_size(char *ifname, struct ethtool_ringparam *ring_param); Signed-off-by: Pu Lehui <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
…parse_format commit ecf2b43018da9579842c774b7f35dbe11b5c38dd upstream. This can lead to out of bounds writes since frames of this type were not taken into account when calculating the size of the frames buffer in uvc_parse_streaming. Fixes: c0efd23 ("V4L/DVB (8145a): USB Video Class driver") Signed-off-by: Benoit Sevens <[email protected]> Cc: [email protected] Acked-by: Greg Kroah-Hartman <[email protected]> Reviewed-by: Laurent Pinchart <[email protected]> Signed-off-by: Hans Verkuil <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
commit ace149e0830c380ddfce7e466fe860ca502fe4ee upstream. If the caller supplies an iocb->ki_pos value that is close to the filesystem upper limit, and an iterator with a count that causes us to overflow that limit, then filemap_read() enters an infinite loop. This behaviour was discovered when testing xfstests generic/525 with the "localio" optimisation for loopback NFS mounts. Reported-by: Mike Snitzer <[email protected]> Fixes: c2a9737 ("vfs,mm: fix a dead loop in truncate_inode_pages_range()") Tested-by: Mike Snitzer <[email protected]> Signed-off-by: Trond Myklebust <[email protected]> Signed-off-by: Linus Torvalds <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
![github-actions[bot]](https://avatars.githubusercontent.com/in/15368?s=60&v=4){kind=small}
| compiler_gnutype: Optional[str] = None | ||
| compiler_gnutype_compat: Optional[str] = None | ||
| config: list[Path] = dataclasses.field(default_factory=list) | ||
| config_default: list[Path] = dataclasses.field(default_factory=list, repr=False) |
There was a problem hiding this comment.
WARNING: Prefer a maximum 75 chars per line (possible unwrapped commit description?)
|
|
||
|
|
||
| class FirmwareFile(object): | ||
| def __init__(self, binary, desc=None, source=None, version=None) -> None: |
There was a problem hiding this comment.
WARNING: Prefer a maximum 75 chars per line (possible unwrapped commit description?)
| if in_header: | ||
| continue | ||
|
|
||
| if line == '\n': |
There was a problem hiding this comment.
ERROR: patch seems to be corrupt (line wrapped?)
| assert a.long == [] | ||
|
|
||
| def test_init_str(self) -> None: | ||
| a = PackageDescription('Short\nLong1\n.\nLong2') |
There was a problem hiding this comment.
ERROR: patch seems to be corrupt (line wrapped?)
| a = PackageRelationEntry('package (>=version) [arch2 arch1] <profile1 >') | ||
| assert a.name == 'package' | ||
| assert a.version == 'version' | ||
| assert a.arches == {'arch1', 'arch2'} |
There was a problem hiding this comment.
WARNING: Prefer a maximum 75 chars per line (possible unwrapped commit description?)
|
|
||
| return value[0] | ||
|
|
||
| def get_control(self, key: str, context: dict[str, str] = {}) -> BinaryPackage: |
There was a problem hiding this comment.
WARNING: Prefer a maximum 75 chars per line (possible unwrapped commit description?)
| @@ -0,0 +1,30 @@ | |||
| #!/bin/bash | |||
| set -euE | |||
There was a problem hiding this comment.
WARNING: Missing or malformed SPDX-License-Identifier tag in line 2
| trap "rm -rf '$TMP'" EXIT | ||
|
|
||
| function git { | ||
| command git -c advice.detachedHead=false -c init.defaultBranch=main -C "$TMP" "$@" |
| } | ||
|
|
||
| git init -q | ||
| git remote add origin "$REPO" |
|
|
||
| git init -q | ||
| git remote add origin "$REPO" | ||
| git fetch -q --depth 1 origin "$COMMIT_BASE" |
|
[APPROVALNOTIFIER] This PR is NOT APPROVED This pull-request has been approved by: The full list of commands accepted by this bot can be found here.
Needs approval from an approver in each of these files:
Approvers can indicate their approval by writing |
| popd > /dev/null | ||
| done | ||
|
|
||
| for i in control rules.gen generated.signed-amd64 generated.signed-arm64; do |
There was a problem hiding this comment.
WARNING: Prefer a maximum 75 chars per line (possible unwrapped commit description?)
| @@ -0,0 +1,109 @@ | |||
| #!/usr/bin/python3 | |||
|
|
|||
There was a problem hiding this comment.
WARNING: Missing or malformed SPDX-License-Identifier tag in line 2
| with open(path, 'w') as patch: | ||
| in_header = True | ||
| for line in source_patch: | ||
| if in_header and re.match(r'^(\n|[^\w\s]|Index:)', line): |
There was a problem hiding this comment.
ERROR: patch seems to be corrupt (line wrapped?)
| args = ['git', 'format-patch', '--subject-prefix=', range] | ||
| format_proc = subprocess.Popen(args, | ||
| cwd=os.path.join(patch_dir, | ||
| lockdown_patch_dir), |
There was a problem hiding this comment.
WARNING: Prefer a maximum 75 chars per line (possible unwrapped commit description?)
| @@ -0,0 +1,39 @@ | |||
| #!/usr/bin/python3 | |||
|
|
|||
There was a problem hiding this comment.
WARNING: Missing or malformed SPDX-License-Identifier tag in line 2
| @@ -0,0 +1,18 @@ | |||
| #!/bin/sh | |||
|
|
|||
There was a problem hiding this comment.
WARNING: Missing or malformed SPDX-License-Identifier tag in line 2
| @@ -0,0 +1,135 @@ | |||
| #!/usr/bin/python3 | |||
|
|
|||
There was a problem hiding this comment.
WARNING: Missing or malformed SPDX-License-Identifier tag in line 2
| major_ver = re.sub(r'^(\d+)\..*', r'\1', cur_ver) | ||
| while cur_ver != new_ver: | ||
| next_ver = next_update(cur_ver) | ||
| print(' https://www.kernel.org/pub/linux/kernel/v{}.x/ChangeLog-{}' |
There was a problem hiding this comment.
WARNING: Prefer a maximum 75 chars per line (possible unwrapped commit description?)
| with open('debian/changelog.new', 'w') as new_log: | ||
| line_no = 0 | ||
| inserted = False | ||
| intro_line = ' * {}\n'.format(changelog_intro) |
There was a problem hiding this comment.
ERROR: patch seems to be corrupt (line wrapped?)
| @@ -0,0 +1,2 @@ | |||
| #!/bin/sh -e | |||
| exec "$(dirname "$0")/stable-update" "$@" | |||
| @@ -0,0 +1,2 @@ | |||
| #!/bin/sh -e | |||
| exec "$(dirname "$0")/stable-update" "$@" | |||
There was a problem hiding this comment.
WARNING: Missing or malformed SPDX-License-Identifier tag in line 2
|
/lgtm |
|
/lgtm |
Avenger-285714
force-pushed
the
linux-6.6.y
branch
from
23ddbbf to
e72884f
Compare
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment
Add this suggestion to a batch that can be applied as a single commit.
This suggestion is invalid because no changes were made to the code.
Suggestions cannot be applied while the pull request is closed.
Suggestions cannot be applied while viewing a subset of changes.
Only one suggestion per line can be applied in a batch.
Add this suggestion to a batch that can be applied as a single commit.
Applying suggestions on deleted lines is not supported.
You must change the existing code in this line in order to create a valid suggestion.
Outdated suggestions cannot be applied.
This suggestion has been applied or marked resolved.
Suggestions cannot be applied from pending reviews.
Suggestions cannot be applied on multi-line comments.
Suggestions cannot be applied while the pull request is queued to merge.
Suggestion cannot be applied right now. Please check back later.
And remove linux-image*, linux-libc-dev*, and linux-support* to remove unneeded packages (some of those needed are generated with our build_kernel.sh script).
Footnotes
Build these packages with:
apt build-dep .
dpkg-buildpackage -uc -us ↩