[Deepin-Kernel-SIG] [Upstream] Update kernel base to 6.6.63 #488
Conversation
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
[ Upstream commit 1904fb9ebf911441f90a68e96b22aa73e4410505 ] Netlink supports iterative dumping of data. It provides the families the following ops: - start - (optional) kicks off the dumping process - dump - actual dump helper, keeps getting called until it returns 0 - done - (optional) pairs with .start, can be used for cleanup The whole process is asynchronous and the repeated calls to .dump don't actually happen in a tight loop, but rather are triggered in response to recvmsg() on the socket. This gives the user full control over the dump, but also means that the user can close the socket without getting to the end of the dump. To make sure .start is always paired with .done we check if there is an ongoing dump before freeing the socket, and if so call .done. The complication is that sockets can get freed from BH and .done is allowed to sleep. So we use a workqueue to defer the call, when needed. Unfortunately this does not work correctly. What we defer is not the cleanup but rather releasing a reference on the socket. We have no guarantee that we own the last reference, if someone else holds the socket they may release it in BH and we're back to square one. The whole dance, however, appears to be unnecessary. Only the user can interact with dumps, so we can clean up when socket is closed. And close always happens in process context. Some async code may still access the socket after close, queue notification skbs to it etc. but no dumps can start, end or otherwise make progress. Delete the workqueue and flush the dump state directly from the release handler. Note that further cleanup is possible in -next, for instance we now always call .done before releasing the main module reference, so dump doesn't have to take a reference of its own. Reported-by: syzkaller <[email protected]> Fixes: ed5d778 ("netlink: Do not schedule work from sk_destruct") Reviewed-by: Kuniyuki Iwashima <[email protected]> Reviewed-by: Eric Dumazet <[email protected]> Link: https://patch.msgid.link/[email protected] Signed-off-by: Jakub Kicinski <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
[ Upstream commit eb72e7fcc83987d5d5595b43222f23b295d5de7f ]
A lockdep report [1] with CONFIG_PROVE_RCU_LIST=y hints
that sctp_v6_available() is calling dev_get_by_index_rcu()
and ipv6_chk_addr() without holding rcu.
[1]
=============================
WARNING: suspicious RCU usage
6.12.0-rc5-virtme #1216 Tainted: G W
-----------------------------
net/core/dev.c:876 RCU-list traversed in non-reader section!!
other info that might help us debug this:
rcu_scheduler_active = 2, debug_locks = 1
1 lock held by sctp_hello/31495:
#0: ffff9f1ebbdb7418 (sk_lock-AF_INET6){+.+.}-{0:0}, at: sctp_bind (./arch/x86/include/asm/jump_label.h:27 net/sctp/socket.c:315) sctp
stack backtrace:
CPU: 7 UID: 0 PID: 31495 Comm: sctp_hello Tainted: G W 6.12.0-rc5-virtme #1216
Tainted: [W]=WARN
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.3-debian-1.16.3-2 04/01/2014
Call Trace:
<TASK>
dump_stack_lvl (lib/dump_stack.c:123)
lockdep_rcu_suspicious (kernel/locking/lockdep.c:6822)
dev_get_by_index_rcu (net/core/dev.c:876 (discriminator 7))
sctp_v6_available (net/sctp/ipv6.c:701) sctp
sctp_do_bind (net/sctp/socket.c:400 (discriminator 1)) sctp
sctp_bind (net/sctp/socket.c:320) sctp
inet6_bind_sk (net/ipv6/af_inet6.c:465)
? security_socket_bind (security/security.c:4581 (discriminator 1))
__sys_bind (net/socket.c:1848 net/socket.c:1869)
? do_user_addr_fault (./include/linux/rcupdate.h:347 ./include/linux/rcupdate.h:880 ./include/linux/mm.h:729 arch/x86/mm/fault.c:1340)
? do_user_addr_fault (./arch/x86/include/asm/preempt.h:84 (discriminator 13) ./include/linux/rcupdate.h:98 (discriminator 13) ./include/linux/rcupdate.h:882 (discriminator 13) ./include/linux/mm.h:729 (discriminator 13) arch/x86/mm/fault.c:1340 (discriminator 13))
__x64_sys_bind (net/socket.c:1877 (discriminator 1) net/socket.c:1875 (discriminator 1) net/socket.c:1875 (discriminator 1))
do_syscall_64 (arch/x86/entry/common.c:52 (discriminator 1) arch/x86/entry/common.c:83 (discriminator 1))
entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:130)
RIP: 0033:0x7f59b934a1e7
Code: 44 00 00 48 8b 15 39 8c 0c 00 f7 d8 64 89 02 b8 ff ff ff ff eb bd 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 00 b8 31 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 09 8c 0c 00 f7 d8 64 89 01 48
All code
========
0: 44 00 00 add %r8b,(%rax)
3: 48 8b 15 39 8c 0c 00 mov 0xc8c39(%rip),%rdx # 0xc8c43
a: f7 d8 neg %eax
c: 64 89 02 mov %eax,%fs:(%rdx)
f: b8 ff ff ff ff mov $0xffffffff,%eax
14: eb bd jmp 0xffffffffffffffd3
16: 66 2e 0f 1f 84 00 00 cs nopw 0x0(%rax,%rax,1)
1d: 00 00 00
20: 0f 1f 00 nopl (%rax)
23: b8 31 00 00 00 mov $0x31,%eax
28: 0f 05 syscall
2a:* 48 3d 01 f0 ff ff cmp $0xfffffffffffff001,%rax <-- trapping instruction
30: 73 01 jae 0x33
32: c3 ret
33: 48 8b 0d 09 8c 0c 00 mov 0xc8c09(%rip),%rcx # 0xc8c43
3a: f7 d8 neg %eax
3c: 64 89 01 mov %eax,%fs:(%rcx)
3f: 48 rex.W
Code starting with the faulting instruction
===========================================
0: 48 3d 01 f0 ff ff cmp $0xfffffffffffff001,%rax
6: 73 01 jae 0x9
8: c3 ret
9: 48 8b 0d 09 8c 0c 00 mov 0xc8c09(%rip),%rcx # 0xc8c19
10: f7 d8 neg %eax
12: 64 89 01 mov %eax,%fs:(%rcx)
15: 48 rex.W
RSP: 002b:00007ffe2d0ad398 EFLAGS: 00000202 ORIG_RAX: 0000000000000031
RAX: ffffffffffffffda RBX: 00007ffe2d0ad3d0 RCX: 00007f59b934a1e7
RDX: 000000000000001c RSI: 00007ffe2d0ad3d0 RDI: 0000000000000005
RBP: 0000000000000005 R08: 1999999999999999 R09: 0000000000000000
R10: 00007f59b9253298 R11: 0000000000000202 R12: 00007ffe2d0ada61
R13: 0000000000000000 R14: 0000562926516dd8 R15: 00007f59b9479000
</TASK>
Fixes: 6fe1e52 ("sctp: check ipv6 addr with sk_bound_dev if set")
Signed-off-by: Eric Dumazet <[email protected]>
Cc: Marcelo Ricardo Leitner <[email protected]>
Acked-by: Xin Long <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
[ Upstream commit e68da664d379f352d41d7955712c44e0a738e4ab ] The tx_bytes should consider the actual size of the Ethernet frames without the SPI encapsulation. But we still need to take care of Ethernet padding. Fixes: 2f207cb ("net: vertexcom: Add MSE102x SPI support") Signed-off-by: Stefan Wahren <[email protected]> Link: https://patch.msgid.link/[email protected] Signed-off-by: Jakub Kicinski <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
[ Upstream commit ab1c793f457f740ab7108cc0b1340a402dbf484d ] The 'state' can't be NULL, we should check crtc_state. Fix warning: drivers/gpu/drm/rockchip/rockchip_drm_vop.c:1096 vop_plane_atomic_async_check() warn: variable dereferenced before check 'state' (see line 1077) Fixes: 5ddb0bd ("drm/atomic: Pass the full state to planes async atomic check and update") Signed-off-by: Andy Yan <[email protected]> Signed-off-by: Heiko Stuebner <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected] Signed-off-by: Sasha Levin <[email protected]>
[ Upstream commit 581302298524e9d77c4c44ff5156a6cd112227ae ] Eric reported a division by zero splat in the MPTCP protocol: Oops: divide error: 0000 [#1] PREEMPT SMP KASAN PTI CPU: 1 UID: 0 PID: 6094 Comm: syz-executor317 Not tainted 6.12.0-rc5-syzkaller-00291-g05b92660cdfe #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 09/13/2024 RIP: 0010:__tcp_select_window+0x5b4/0x1310 net/ipv4/tcp_output.c:3163 Code: f6 44 01 e3 89 df e8 9b 75 09 f8 44 39 f3 0f 8d 11 ff ff ff e8 0d 74 09 f8 45 89 f4 e9 04 ff ff ff e8 00 74 09 f8 44 89 f0 99 <f7> 7c 24 14 41 29 d6 45 89 f4 e9 ec fe ff ff e8 e8 73 09 f8 48 89 RSP: 0018:ffffc900041f7930 EFLAGS: 00010293 RAX: 0000000000017e67 RBX: 0000000000017e67 RCX: ffffffff8983314b RDX: 0000000000000000 RSI: ffffffff898331b0 RDI: 0000000000000004 RBP: 00000000005d6000 R08: 0000000000000004 R09: 0000000000017e67 R10: 0000000000003e80 R11: 0000000000000000 R12: 0000000000003e80 R13: ffff888031d9b440 R14: 0000000000017e67 R15: 00000000002eb000 FS: 00007feb5d7f16c0(0000) GS:ffff8880b8700000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007feb5d8adbb8 CR3: 0000000074e4c000 CR4: 00000000003526f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> __tcp_cleanup_rbuf+0x3e7/0x4b0 net/ipv4/tcp.c:1493 mptcp_rcv_space_adjust net/mptcp/protocol.c:2085 [inline] mptcp_recvmsg+0x2156/0x2600 net/mptcp/protocol.c:2289 inet_recvmsg+0x469/0x6a0 net/ipv4/af_inet.c:885 sock_recvmsg_nosec net/socket.c:1051 [inline] sock_recvmsg+0x1b2/0x250 net/socket.c:1073 __sys_recvfrom+0x1a5/0x2e0 net/socket.c:2265 __do_sys_recvfrom net/socket.c:2283 [inline] __se_sys_recvfrom net/socket.c:2279 [inline] __x64_sys_recvfrom+0xe0/0x1c0 net/socket.c:2279 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xcd/0x250 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f RIP: 0033:0x7feb5d857559 Code: 28 00 00 00 75 05 48 83 c4 28 c3 e8 51 18 00 00 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 b0 ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007feb5d7f1208 EFLAGS: 00000246 ORIG_RAX: 000000000000002d RAX: ffffffffffffffda RBX: 00007feb5d8e1318 RCX: 00007feb5d857559 RDX: 000000800000000e RSI: 0000000000000000 RDI: 0000000000000003 RBP: 00007feb5d8e1310 R08: 0000000000000000 R09: ffffffff81000000 R10: 0000000000000100 R11: 0000000000000246 R12: 00007feb5d8e131c R13: 00007feb5d8ae074 R14: 000000800000000e R15: 00000000fffffdef and provided a nice reproducer. The root cause is the current bad handling of racing disconnect. After the blamed commit below, sk_wait_data() can return (with error) with the underlying socket disconnected and a zero rcv_mss. Catch the error and return without performing any additional operations on the current socket. Reported-by: Eric Dumazet <[email protected]> Fixes: 419ce13 ("tcp: allow again tcp_disconnect() when threads are waiting") Signed-off-by: Paolo Abeni <[email protected]> Reviewed-by: Matthieu Baerts (NGI0) <[email protected]> Link: https://patch.msgid.link/8c82ecf71662ecbc47bf390f9905de70884c9f2d.1731060874.git.pabeni@redhat.com Signed-off-by: Jakub Kicinski <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
[ Upstream commit ce7356ae35943cc6494cc692e62d51a734062b7d ] Additional active subflows - i.e. created by the in kernel path manager - are included into the subflow list before starting the 3whs. A racing recvmsg() spooling data received on an already established subflow would unconditionally call tcp_cleanup_rbuf() on all the current subflows, potentially hitting a divide by zero error on the newly created ones. Explicitly check that the subflow is in a suitable state before invoking tcp_cleanup_rbuf(). Fixes: c76c695 ("mptcp: call tcp_cleanup_rbuf on subflows") Signed-off-by: Paolo Abeni <[email protected]> Reviewed-by: Matthieu Baerts (NGI0) <[email protected]> Link: https://patch.msgid.link/02374660836e1b52afc91966b7535c8c5f7bafb0.1731060874.git.pabeni@redhat.com Signed-off-by: Jakub Kicinski <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
[ Upstream commit 9ca314419930f9135727e39d77e66262d5f7bef6 ] The referenced commits introduced a two-step process for deleting FTEs: - Lock the FTE, delete it from hardware, set the hardware deletion function to NULL and unlock the FTE. - Lock the parent flow group, delete the software copy of the FTE, and remove it from the xarray. However, this approach encounters a race condition if a rule with the same match value is added simultaneously. In this scenario, fs_core may set the hardware deletion function to NULL prematurely, causing a panic during subsequent rule deletions. To prevent this, ensure the active flag of the FTE is checked under a lock, which will prevent the fs_core layer from attaching a new steering rule to an FTE that is in the process of deletion. [ 438.967589] MOSHE: 2496 mlx5_del_flow_rules del_hw_func [ 438.968205] ------------[ cut here ]------------ [ 438.968654] refcount_t: decrement hit 0; leaking memory. [ 438.969249] WARNING: CPU: 0 PID: 8957 at lib/refcount.c:31 refcount_warn_saturate+0xfb/0x110 [ 438.970054] Modules linked in: act_mirred cls_flower act_gact sch_ingress openvswitch nsh mlx5_vdpa vringh vhost_iotlb vdpa mlx5_ib mlx5_core xt_conntrack xt_MASQUERADE nf_conntrack_netlink nfnetlink xt_addrtype iptable_nat nf_nat br_netfilter rpcsec_gss_krb5 auth_rpcgss oid_registry overlay rpcrdma rdma_ucm ib_iser libiscsi scsi_transport_iscsi ib_umad rdma_cm ib_ipoib iw_cm ib_cm ib_uverbs ib_core zram zsmalloc fuse [last unloaded: cls_flower] [ 438.973288] CPU: 0 UID: 0 PID: 8957 Comm: tc Not tainted 6.12.0-rc1+ deepin-community#8 [ 438.973888] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014 [ 438.974874] RIP: 0010:refcount_warn_saturate+0xfb/0x110 [ 438.975363] Code: 40 66 3b 82 c6 05 16 e9 4d 01 01 e8 1f 7c a0 ff 0f 0b c3 cc cc cc cc 48 c7 c7 10 66 3b 82 c6 05 fd e8 4d 01 01 e8 05 7c a0 ff <0f> 0b c3 cc cc cc cc 66 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 00 90 [ 438.976947] RSP: 0018:ffff888124a53610 EFLAGS: 00010286 [ 438.977446] RAX: 0000000000000000 RBX: ffff888119d56de0 RCX: 0000000000000000 [ 438.978090] RDX: ffff88852c828700 RSI: ffff88852c81b3c0 RDI: ffff88852c81b3c0 [ 438.978721] RBP: ffff888120fa0e88 R08: 0000000000000000 R09: ffff888124a534b0 [ 438.979353] R10: 0000000000000001 R11: 0000000000000001 R12: ffff888119d56de0 [ 438.979979] R13: ffff888120fa0ec0 R14: ffff888120fa0ee8 R15: ffff888119d56de0 [ 438.980607] FS: 00007fe6dcc0f800(0000) GS:ffff88852c800000(0000) knlGS:0000000000000000 [ 438.983984] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 438.984544] CR2: 00000000004275e0 CR3: 0000000186982001 CR4: 0000000000372eb0 [ 438.985205] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 438.985842] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 438.986507] Call Trace: [ 438.986799] <TASK> [ 438.987070] ? __warn+0x7d/0x110 [ 438.987426] ? refcount_warn_saturate+0xfb/0x110 [ 438.987877] ? report_bug+0x17d/0x190 [ 438.988261] ? prb_read_valid+0x17/0x20 [ 438.988659] ? handle_bug+0x53/0x90 [ 438.989054] ? exc_invalid_op+0x14/0x70 [ 438.989458] ? asm_exc_invalid_op+0x16/0x20 [ 438.989883] ? refcount_warn_saturate+0xfb/0x110 [ 438.990348] mlx5_del_flow_rules+0x2f7/0x340 [mlx5_core] [ 438.990932] __mlx5_eswitch_del_rule+0x49/0x170 [mlx5_core] [ 438.991519] ? mlx5_lag_is_sriov+0x3c/0x50 [mlx5_core] [ 438.992054] ? xas_load+0x9/0xb0 [ 438.992407] mlx5e_tc_rule_unoffload+0x45/0xe0 [mlx5_core] [ 438.993037] mlx5e_tc_del_fdb_flow+0x2a6/0x2e0 [mlx5_core] [ 438.993623] mlx5e_flow_put+0x29/0x60 [mlx5_core] [ 438.994161] mlx5e_delete_flower+0x261/0x390 [mlx5_core] [ 438.994728] tc_setup_cb_destroy+0xb9/0x190 [ 438.995150] fl_hw_destroy_filter+0x94/0xc0 [cls_flower] [ 438.995650] fl_change+0x11a4/0x13c0 [cls_flower] [ 438.996105] tc_new_tfilter+0x347/0xbc0 [ 438.996503] ? ___slab_alloc+0x70/0x8c0 [ 438.996929] rtnetlink_rcv_msg+0xf9/0x3e0 [ 438.997339] ? __netlink_sendskb+0x4c/0x70 [ 438.997751] ? netlink_unicast+0x286/0x2d0 [ 438.998171] ? __pfx_rtnetlink_rcv_msg+0x10/0x10 [ 438.998625] netlink_rcv_skb+0x54/0x100 [ 438.999020] netlink_unicast+0x203/0x2d0 [ 438.999421] netlink_sendmsg+0x1e4/0x420 [ 438.999820] __sock_sendmsg+0xa1/0xb0 [ 439.000203] ____sys_sendmsg+0x207/0x2a0 [ 439.000600] ? copy_msghdr_from_user+0x6d/0xa0 [ 439.001072] ___sys_sendmsg+0x80/0xc0 [ 439.001459] ? ___sys_recvmsg+0x8b/0xc0 [ 439.001848] ? generic_update_time+0x4d/0x60 [ 439.002282] __sys_sendmsg+0x51/0x90 [ 439.002658] do_syscall_64+0x50/0x110 [ 439.003040] entry_SYSCALL_64_after_hwframe+0x76/0x7e Fixes: 718ce4d ("net/mlx5: Consolidate update FTE for all removal changes") Fixes: cefc235 ("net/mlx5: Fix FTE cleanup") Signed-off-by: Mark Bloch <[email protected]> Reviewed-by: Maor Gottlieb <[email protected]> Signed-off-by: Tariq Toukan <[email protected]> Link: https://patch.msgid.link/[email protected] Signed-off-by: Jakub Kicinski <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
[ Upstream commit dd6e972cc5890d91d6749bb48e3912721c4e4b25 ]
The kTLS tx handling code is using a mix of get_page() and
page_ref_inc() APIs to increment the page reference. But on the release
path (mlx5e_ktls_tx_handle_resync_dump_comp()), only put_page() is used.
This is an issue when using pages from large folios: the get_page()
references are stored on the folio page while the page_ref_inc()
references are stored directly in the given page. On release the folio
page will be dereferenced too many times.
This was found while doing kTLS testing with sendfile() + ZC when the
served file was read from NFS on a kernel with NFS large folios support
(commit 49b29a573da8 ("nfs: add support for large folios")).
Fixes: 84d1bb2 ("net/mlx5e: kTLS, Limit DUMP wqe size")
Signed-off-by: Dragos Tatulea <[email protected]>
Signed-off-by: Tariq Toukan <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
[ Upstream commit c079389878debf767dc4e52fe877b9117258dfe2 ]
Non-uplink representor port does not support XDP. The patch clears
the xdp feature by checking the net_device_ops.ndo_bpf is set or not.
Verify using the netlink tool:
$ tools/net/ynl/cli.py --spec Documentation/netlink/specs/netdev.yaml --dump dev-get
Representor netdev before the patch:
{'ifindex': 8,
'xdp-features': {'basic',
'ndo-xmit',
'ndo-xmit-sg',
'redirect',
'rx-sg',
'xsk-zerocopy'},
'xdp-rx-metadata-features': set(),
'xdp-zc-max-segs': 1,
'xsk-features': set()},
With the patch:
{'ifindex': 8,
'xdp-features': set(),
'xdp-rx-metadata-features': set(),
'xsk-features': set()},
Fixes: 4d5ab0a ("net/mlx5e: take into account device reconfiguration for xdp_features flag")
Signed-off-by: William Tu <[email protected]>
Signed-off-by: Tariq Toukan <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
[ Upstream commit e99c6873229fe0482e7ceb7d5600e32d623ed9d9 ] In error flow of mlx5_tc_ct_entry_add_rule(), in case ct_rule_add() callback returns error, zone_rule->attr is used uninitiated. Fix it to use attr which has the needed pointer value. Kernel log: BUG: kernel NULL pointer dereference, address: 0000000000000110 RIP: 0010:mlx5_tc_ct_entry_add_rule+0x2b1/0x2f0 [mlx5_core] … Call Trace: <TASK> ? __die+0x20/0x70 ? page_fault_oops+0x150/0x3e0 ? exc_page_fault+0x74/0x140 ? asm_exc_page_fault+0x22/0x30 ? mlx5_tc_ct_entry_add_rule+0x2b1/0x2f0 [mlx5_core] ? mlx5_tc_ct_entry_add_rule+0x1d5/0x2f0 [mlx5_core] mlx5_tc_ct_block_flow_offload+0xc6a/0xf90 [mlx5_core] ? nf_flow_offload_tuple+0xd8/0x190 [nf_flow_table] nf_flow_offload_tuple+0xd8/0x190 [nf_flow_table] flow_offload_work_handler+0x142/0x320 [nf_flow_table] ? finish_task_switch.isra.0+0x15b/0x2b0 process_one_work+0x16c/0x320 worker_thread+0x28c/0x3a0 ? __pfx_worker_thread+0x10/0x10 kthread+0xb8/0xf0 ? __pfx_kthread+0x10/0x10 ret_from_fork+0x2d/0x50 ? __pfx_kthread+0x10/0x10 ret_from_fork_asm+0x1a/0x30 </TASK> Fixes: 7fac5c2 ("net/mlx5: CT: Avoid reusing modify header context for natted entries") Signed-off-by: Moshe Shemesh <[email protected]> Reviewed-by: Cosmin Ratiu <[email protected]> Reviewed-by: Yevgeny Kliteynik <[email protected]> Signed-off-by: Tariq Toukan <[email protected]> Link: https://patch.msgid.link/[email protected] Signed-off-by: Jakub Kicinski <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
[ Upstream commit d7b0ff5a866724c3ad21f2628c22a63336deec3f ]
As the final stages of socket destruction may be delayed, it is possible
that virtio_transport_recv_listen() will be called after the accept_queue
has been flushed, but before the SOCK_DONE flag has been set. As a result,
sockets enqueued after the flush would remain unremoved, leading to a
memory leak.
vsock_release
__vsock_release
lock
virtio_transport_release
virtio_transport_close
schedule_delayed_work(close_work)
sk_shutdown = SHUTDOWN_MASK
(!) flush accept_queue
release
virtio_transport_recv_pkt
vsock_find_bound_socket
lock
if flag(SOCK_DONE) return
virtio_transport_recv_listen
child = vsock_create_connected
(!) vsock_enqueue_accept(child)
release
close_work
lock
virtio_transport_do_close
set_flag(SOCK_DONE)
virtio_transport_remove_sock
vsock_remove_sock
vsock_remove_bound
release
Introduce a sk_shutdown check to disallow vsock_enqueue_accept() during
socket destruction.
unreferenced object 0xffff888109e3f800 (size 2040):
comm "kworker/5:2", pid 371, jiffies 4294940105
hex dump (first 32 bytes):
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
28 00 0b 40 00 00 00 00 00 00 00 00 00 00 00 00 (..@............
backtrace (crc 9e5f4e84):
[<ffffffff81418ff1>] kmem_cache_alloc_noprof+0x2c1/0x360
[<ffffffff81d27aa0>] sk_prot_alloc+0x30/0x120
[<ffffffff81d2b54c>] sk_alloc+0x2c/0x4b0
[<ffffffff81fe049a>] __vsock_create.constprop.0+0x2a/0x310
[<ffffffff81fe6d6c>] virtio_transport_recv_pkt+0x4dc/0x9a0
[<ffffffff81fe745d>] vsock_loopback_work+0xfd/0x140
[<ffffffff810fc6ac>] process_one_work+0x20c/0x570
[<ffffffff810fce3f>] worker_thread+0x1bf/0x3a0
[<ffffffff811070dd>] kthread+0xdd/0x110
[<ffffffff81044fdd>] ret_from_fork+0x2d/0x50
[<ffffffff8100785a>] ret_from_fork_asm+0x1a/0x30
Fixes: 3fe356d ("vsock/virtio: discard packets only when socket is really closed")
Reviewed-by: Stefano Garzarella <[email protected]>
Signed-off-by: Michal Luczaj <[email protected]>
Signed-off-by: Paolo Abeni <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
[ Upstream commit 6abe2a90808192a5a8b2825293e5f10e80fdea56 ] The citied commit in Fixes line caused to regression for udaddy [1] application. It doesn't work over VLANs anymore. Client: ifconfig eth2 1.1.1.1 ip link add link eth2 name p0.3597 type vlan protocol 802.1Q id 3597 ip link set dev p0.3597 up ip addr add 2.2.2.2/16 dev p0.3597 udaddy -S 847 -C 220 -c 2 -t 0 -s 2.2.2.3 -b 2.2.2.2 Server: ifconfig eth2 1.1.1.3 ip link add link eth2 name p0.3597 type vlan protocol 802.1Q id 3597 ip link set dev p0.3597 up ip addr add 2.2.2.3/16 dev p0.3597 udaddy -S 847 -C 220 -c 2 -t 0 -b 2.2.2.3 [1] https://github.com/linux-rdma/rdma-core/blob/master/librdmacm/examples/udaddy.c Fixes: 5069d7e202f6 ("RDMA/core: Fix ENODEV error for iWARP test over vlan") Reported-by: Leon Romanovsky <[email protected]> Closes: https://lore.kernel.org/all/20241110130746.GA48891@unreal Link: https://patch.msgid.link/bb9d403419b2b9566da5b8bf0761fa8377927e49.1731401658.git.leon@kernel.org Signed-off-by: Leon Romanovsky <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
[ Upstream commit 7967dc8f797f454d4f4acec15c7df0cdf4801617 ] Since 61a939c ("Bluetooth: Queue incoming ACL data until BT_CONNECTED state is reached") there is no long the need to call mgmt_device_connected as ACL data will be queued until BT_CONNECTED state. Link: https://bugzilla.kernel.org/show_bug.cgi?id=219458 Link: bluez/bluez#1014 Fixes: 333b4fd11e89 ("Bluetooth: L2CAP: Fix uaf in l2cap_connect") Signed-off-by: Luiz Augusto von Dentz <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
[ Upstream commit d5359a7f583ab9b7706915213b54deac065bcb81 ]
Have exception event part of HCI traces which helps for debug.
snoop traces:
> HCI Event: Vendor (0xff) plen 79
Vendor Prefix (0x8780)
Intel Extended Telemetry (0x03)
Unknown extended telemetry event type (0xde)
01 01 de
Unknown extended subevent 0x07
01 01 de 07 01 de 06 1c ef be ad de ef be ad de
ef be ad de ef be ad de ef be ad de ef be ad de
ef be ad de 05 14 ef be ad de ef be ad de ef be
ad de ef be ad de ef be ad de 43 10 ef be ad de
ef be ad de ef be ad de ef be ad de
Fixes: af39533 ("Bluetooth: btintel: Add Intel devcoredump support")
Signed-off-by: Kiran K <[email protected]>
Signed-off-by: Luiz Augusto von Dentz <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
[ Upstream commit 6b78deb ] Proper refcounts will always warn splat when something goes wrong, be it underflow, saturation or object resurrection. As these are always a source of bugs, use it in cls_u32 as a safeguard to prevent/catch issues. Another benefit is that the refcount API self documents the code, making clear when transitions to dead are expected. For such an update we had to make minor adaptations on u32 to fit the refcount API. First we set explicitly to '1' when objects are created, then the objects are alive until a 1 -> 0 happens, which is then released appropriately. The above made clear some redundant operations in the u32 code around the root_ht handling that were removed. The root_ht is created with a refcnt set to 1. Then when it's associated with tcf_proto it increments the refcnt to 2. Throughout the entire code the root_ht is an exceptional case and can never be referenced, therefore the refcnt never incremented/decremented. Its lifetime is always bound to tcf_proto, meaning if you delete tcf_proto the root_ht is deleted as well. The code made up for the fact that root_ht refcnt is 2 and did a double decrement to free it, which is not a fit for the refcount API. Even though refcount_t is implemented using atomics, we should observe a negligible control plane impact. Signed-off-by: Pedro Tammela <[email protected]> Acked-by: Jamal Hadi Salim <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]> Stable-dep-of: 73af53d82076 ("net: sched: cls_u32: Fix u32's systematic failure to free IDR entries for hnodes.") Signed-off-by: Sasha Levin <[email protected]>
… for hnodes.
[ Upstream commit 73af53d82076bbe184d9ece9e14b0dc8599e6055 ]
To generate hnode handles (in gen_new_htid()), u32 uses IDR and
encodes the returned small integer into a structured 32-bit
word. Unfortunately, at disposal time, the needed decoding
is not done. As a result, idr_remove() fails, and the IDR
fills up. Since its size is 2048, the following script ends up
with "Filter already exists":
tc filter add dev myve $FILTER1
tc filter add dev myve $FILTER2
for i in {1..2048}
do
echo $i
tc filter del dev myve $FILTER2
tc filter add dev myve $FILTER2
done
This patch adds the missing decoding logic for handles that
deserve it.
Fixes: e761437 ("net_sched: use idr to allocate u32 filter handles")
Reviewed-by: Eric Dumazet <[email protected]>
Acked-by: Jamal Hadi Salim <[email protected]>
Signed-off-by: Alexandre Ferrieux <[email protected]>
Tested-by: Victor Nogueira <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
[ Upstream commit 3342dc8b4623d835e7dd76a15cec2e5a94fe2f93 ] In the pktgen_sample01_simple.sh script, the device variable is uppercase 'DEV' instead of lowercase 'dev'. Because of this typo, the script cannot enable UDP tx checksum. Fixes: 460a9aa ("samples: pktgen: add UDP tx checksum support") Signed-off-by: Wei Fang <[email protected]> Reviewed-by: Simon Horman <[email protected]> Acked-by: Jesper Dangaard Brouer <[email protected]> Link: https://patch.msgid.link/[email protected] Signed-off-by: Jakub Kicinski <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
[ Upstream commit a03b18a71c128846360cc81ac6fdb0e7d41597b4 ] The mediatek,mac-wol property is being handled backwards to what is described in the binding: it currently enables PHY WOL when the property is present and vice versa. Invert the driver logic so it matches the binding description. Fixes: fd1d62d ("net: stmmac: replace the use_phy_wol field with a flag") Signed-off-by: Nícolas F. R. A. Prado <[email protected]> Link: https://patch.msgid.link/20241109-mediatek-mac-wol-noninverted-v2-1-0e264e213878@collabora.com Signed-off-by: Jakub Kicinski <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
[ Upstream commit eb94b7bb10109a14a5431a67e5d8e31cfa06b395 ]
copy_safe_from_sockptr()
return copy_from_sockptr()
return copy_from_sockptr_offset()
return copy_from_user()
copy_from_user() does not return an error on fault. Instead, it returns a
number of bytes that were not copied. Have it handled.
Patch has a side effect: it un-breaks garbage input handling of
nfc_llcp_setsockopt() and mISDN's data_sock_setsockopt().
Fixes: 6309863 ("net: add copy_safe_from_sockptr() helper")
Signed-off-by: Michal Luczaj <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
[ Upstream commit abea8fd ] Simplify the driver's probe() function by using the devres variant of stmmac_probe_config_dt(). The calling of stmmac_pltfr_remove() now needs to be switched to stmmac_pltfr_remove_no_dt(). Signed-off-by: Jisheng Zhang <[email protected]> Signed-off-by: David S. Miller <[email protected]> Stable-dep-of: 5b366eae7193 ("stmmac: dwmac-intel-plat: fix call balance of tx_clk handling routines") Signed-off-by: Sasha Levin <[email protected]>
[ Upstream commit d336a11 ] Simplify the driver's probe() function by using the devres variant of stmmac_probe_config_dt(). The calling of stmmac_pltfr_remove() now needs to be switched to stmmac_pltfr_remove_no_dt(). Signed-off-by: Jisheng Zhang <[email protected]> Signed-off-by: David S. Miller <[email protected]> Stable-dep-of: 5b366eae7193 ("stmmac: dwmac-intel-plat: fix call balance of tx_clk handling routines") Signed-off-by: Sasha Levin <[email protected]>
[ Upstream commit 2c9fc83 ] Now, all users of the old stmmac_pltfr_remove() are converted to the devres helper, it's time to rename stmmac_pltfr_remove_no_dt() back to stmmac_pltfr_remove() and remove the old stmmac_pltfr_remove(). Signed-off-by: Jisheng Zhang <[email protected]> Signed-off-by: David S. Miller <[email protected]> Stable-dep-of: 5b366eae7193 ("stmmac: dwmac-intel-plat: fix call balance of tx_clk handling routines") Signed-off-by: Sasha Levin <[email protected]>
[ Upstream commit 5b366eae71937ae7412365340b431064625f9617 ] If the clock dwmac->tx_clk was not enabled in intel_eth_plat_probe, it should not be disabled in any path. Conversely, if it was enabled in intel_eth_plat_probe, it must be disabled in all error paths to ensure proper cleanup. Found by Linux Verification Center (linuxtesting.org) with Klever. Fixes: 9efc9b2 ("net: stmmac: Add dwmac-intel-plat for GBE driver") Signed-off-by: Vitalii Mordan <[email protected]> Link: https://patch.msgid.link/[email protected] Signed-off-by: Jakub Kicinski <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
[ Upstream commit dc065076ee7768377d7c16af7d1b0767782d8c98 ] The first PPS latch time needs to be calculated by the driver (in rounded off seconds) and configured as the start time offset for the cycle. After synchronizing two PTP clocks running as master/slave, missing this would cause master and slave to start immediately with some milliseconds drift which causes the PPS signal to never synchronize with the PTP master. Fixes: 186734c ("net: ti: icssg-prueth: add packet timestamping and ptp support") Signed-off-by: Meghana Malladi <[email protected]> Reviewed-by: Vadim Fedorenko <[email protected]> Reviewed-by: MD Danish Anwar <[email protected]> Link: https://patch.msgid.link/[email protected] Signed-off-by: Paolo Abeni <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
[ Upstream commit 8eb36164d1a6769a20ed43033510067ff3dab9ee ] Commit 4598380 ("bonding: fix ns validation on backup slaves") tried to resolve the issue where backup slaves couldn't be brought up when receiving IPv6 Neighbor Solicitation (NS) messages. However, this fix only worked for drivers that receive all multicast messages, such as the veth interface. For standard drivers, the NS multicast message is silently dropped because the slave device is not a member of the NS target multicast group. To address this, we need to make the slave device join the NS target multicast group, ensuring it can receive these IPv6 NS messages to validate the slave’s status properly. There are three policies before joining the multicast group: 1. All settings must be under active-backup mode (alb and tlb do not support arp_validate), with backup slaves and slaves supporting multicast. 2. We can add or remove multicast groups when arp_validate changes. 3. Other operations, such as enslaving, releasing, or setting NS targets, need to be guarded by arp_validate. Fixes: 4e24be0 ("bonding: add new parameter ns_targets") Signed-off-by: Hangbin Liu <[email protected]> Reviewed-by: Nikolay Aleksandrov <[email protected]> Signed-off-by: Paolo Abeni <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
[ Upstream commit ed6cbe6e5563452f305e89c15846820f2874e431 ] The patchset introducing kernel_sec_start/end variables to separate the kernel/lowmem memory mappings, broke the mapping of the kernel memory for xipkernels. kernel_sec_start/end variables are in RO area before the MMU is switched on for xipkernels. So these cannot be set early in boot in head.S. Fix this by setting these after MMU is switched on. xipkernels need two different mappings for kernel text (starting at CONFIG_XIP_PHYS_ADDR) and data (starting at CONFIG_PHYS_OFFSET). Also, move the kernel code mapping from devicemaps_init() to map_kernel(). Fixes: a91da54 ("ARM: 9089/1: Define kernel physical section start and end") Signed-off-by: Harith George <[email protected]> Reviewed-by: Linus Walleij <[email protected]> Signed-off-by: Russell King (Oracle) <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
[ Upstream commit a39326767c55c00c7c313333404cbcb502cce8fe ] Add a missing semicolon. Link: https://lkml.kernel.org/r/[email protected] Fixes: ece5897e5a10 ("tools/mm: -Werror fixes in page-types/slabinfo") Signed-off-by: Motiejus JakÅ`tys <[email protected]> Closes: NixOS/nixpkgs#355369 Reviewed-by: SeongJae Park <[email protected]> Reviewed-by: Vishal Moola (Oracle) <[email protected]> Acked-by: Oleksandr Natalenko <[email protected]> Cc: Wladislav Wiebe <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
commit 8d9ffb2fe65a6c4ef114e8d4f947958a12751bbe upstream. The kdump kernel is broken on SME systems with CONFIG_IMA_KEXEC=y enabled. Debugging traced the issue back to b69a2af ("x86/kexec: Carry forward IMA measurement log on kexec"). Testing was previously not conducted on SME systems with CONFIG_IMA_KEXEC enabled, which led to the oversight, with the following incarnation: ... ima: No TPM chip found, activating TPM-bypass! Loading compiled-in module X.509 certificates Loaded X.509 cert 'Build time autogenerated kernel key: 18ae0bc7e79b64700122bb1d6a904b070fef2656' ima: Allocated hash algorithm: sha256 Oops: general protection fault, probably for non-canonical address 0xcfacfdfe6660003e: 0000 [#1] PREEMPT SMP NOPTI CPU: 0 UID: 0 PID: 1 Comm: swapper/0 Not tainted 6.11.0-rc2+ deepin-community#14 Hardware name: Dell Inc. PowerEdge R7425/02MJ3T, BIOS 1.20.0 05/03/2023 RIP: 0010:ima_restore_measurement_list Call Trace: <TASK> ? show_trace_log_lvl ? show_trace_log_lvl ? ima_load_kexec_buffer ? __die_body.cold ? die_addr ? exc_general_protection ? asm_exc_general_protection ? ima_restore_measurement_list ? vprintk_emit ? ima_load_kexec_buffer ima_load_kexec_buffer ima_init ? __pfx_init_ima init_ima ? __pfx_init_ima do_one_initcall do_initcalls ? __pfx_kernel_init kernel_init_freeable kernel_init ret_from_fork ? __pfx_kernel_init ret_from_fork_asm </TASK> Modules linked in: ---[ end trace 0000000000000000 ]--- ... Kernel panic - not syncing: Fatal exception Kernel Offset: disabled Rebooting in 10 seconds.. Adding debug printks showed that the stored addr and size of ima_kexec buffer are not decrypted correctly like: ima: ima_load_kexec_buffer, buffer:0xcfacfdfe6660003e, size:0xe48066052d5df359 Three types of setup_data info — SETUP_EFI, - SETUP_IMA, and - SETUP_RNG_SEED are passed to the kexec/kdump kernel. Only the ima_kexec buffer experienced incorrect decryption. Debugging identified a bug in early_memremap_is_setup_data(), where an incorrect range calculation occurred due to the len variable in struct setup_data ended up only representing the length of the data field, excluding the struct's size, and thus leading to miscalculation. Address a similar issue in memremap_is_setup_data() while at it. [ bp: Heavily massage. ] Fixes: b3c72fc ("x86/boot: Introduce setup_indirect") Signed-off-by: Baoquan He <[email protected]> Signed-off-by: Borislav Petkov (AMD) <[email protected]> Acked-by: Tom Lendacky <[email protected]> Cc: <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
commit 8ce41b0f9d77cca074df25afd39b86e2ee3aa68e upstream. We triggered a NULL pointer dereference for ac.preferred_zoneref->zone in alloc_pages_bulk_noprof() when the task is migrated between cpusets. When cpuset is enabled, in prepare_alloc_pages(), ac->nodemask may be ¤t->mems_allowed. when first_zones_zonelist() is called to find preferred_zoneref, the ac->nodemask may be modified concurrently if the task is migrated between different cpusets. Assuming we have 2 NUMA Node, when traversing Node1 in ac->zonelist, the nodemask is 2, and when traversing Node2 in ac->zonelist, the nodemask is 1. As a result, the ac->preferred_zoneref points to NULL zone. In alloc_pages_bulk_noprof(), for_each_zone_zonelist_nodemask() finds a allowable zone and calls zonelist_node_idx(ac.preferred_zoneref), leading to NULL pointer dereference. __alloc_pages_noprof() fixes this issue by checking NULL pointer in commit ea57485 ("mm, page_alloc: fix check for NULL preferred_zone") and commit df76cee ("mm, page_alloc: remove redundant checks from alloc fastpath"). To fix it, check NULL pointer for preferred_zoneref->zone. Link: https://lkml.kernel.org/r/[email protected] Fixes: 387ba26 ("mm/page_alloc: add a bulk page allocator") Signed-off-by: Jinjiang Tu <[email protected]> Reviewed-by: Vlastimil Babka <[email protected]> Cc: Alexander Lobakin <[email protected]> Cc: David Hildenbrand <[email protected]> Cc: Kefeng Wang <[email protected]> Cc: Mel Gorman <[email protected]> Cc: Nanyong Sun <[email protected]> Cc: <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
commit 737f34137844d6572ab7d473c998c7f977ff30eb upstream. Syzbot has reported the following BUG: kernel BUG at fs/ocfs2/uptodate.c:509! ... Call Trace: <TASK> ? __die_body+0x5f/0xb0 ? die+0x9e/0xc0 ? do_trap+0x15a/0x3a0 ? ocfs2_set_new_buffer_uptodate+0x145/0x160 ? do_error_trap+0x1dc/0x2c0 ? ocfs2_set_new_buffer_uptodate+0x145/0x160 ? __pfx_do_error_trap+0x10/0x10 ? handle_invalid_op+0x34/0x40 ? ocfs2_set_new_buffer_uptodate+0x145/0x160 ? exc_invalid_op+0x38/0x50 ? asm_exc_invalid_op+0x1a/0x20 ? ocfs2_set_new_buffer_uptodate+0x2e/0x160 ? ocfs2_set_new_buffer_uptodate+0x144/0x160 ? ocfs2_set_new_buffer_uptodate+0x145/0x160 ocfs2_group_add+0x39f/0x15a0 ? __pfx_ocfs2_group_add+0x10/0x10 ? __pfx_lock_acquire+0x10/0x10 ? mnt_get_write_access+0x68/0x2b0 ? __pfx_lock_release+0x10/0x10 ? rcu_read_lock_any_held+0xb7/0x160 ? __pfx_rcu_read_lock_any_held+0x10/0x10 ? smack_log+0x123/0x540 ? mnt_get_write_access+0x68/0x2b0 ? mnt_get_write_access+0x68/0x2b0 ? mnt_get_write_access+0x226/0x2b0 ocfs2_ioctl+0x65e/0x7d0 ? __pfx_ocfs2_ioctl+0x10/0x10 ? smack_file_ioctl+0x29e/0x3a0 ? __pfx_smack_file_ioctl+0x10/0x10 ? lockdep_hardirqs_on_prepare+0x43d/0x780 ? __pfx_lockdep_hardirqs_on_prepare+0x10/0x10 ? __pfx_ocfs2_ioctl+0x10/0x10 __se_sys_ioctl+0xfb/0x170 do_syscall_64+0xf3/0x230 entry_SYSCALL_64_after_hwframe+0x77/0x7f ... </TASK> When 'ioctl(OCFS2_IOC_GROUP_ADD, ...)' has failed for the particular inode in 'ocfs2_verify_group_and_input()', corresponding buffer head remains cached and subsequent call to the same 'ioctl()' for the same inode issues the BUG() in 'ocfs2_set_new_buffer_uptodate()' (trying to cache the same buffer head of that inode). Fix this by uncaching the buffer head with 'ocfs2_remove_from_cache()' on error path in 'ocfs2_group_add()'. Link: https://lkml.kernel.org/r/[email protected] Fixes: 7909f2b ("[PATCH 2/2] ocfs2: Implement group add for online resize") Signed-off-by: Dmitry Antipov <[email protected]> Reported-by: [email protected] Closes: https://syzkaller.appspot.com/bug?extid=453873f1588c2d75b447 Reviewed-by: Joseph Qi <[email protected]> Cc: Dmitry Antipov <[email protected]> Cc: Joel Becker <[email protected]> Cc: Mark Fasheh <[email protected]> Cc: Junxiao Bi <[email protected]> Cc: Changwei Ge <[email protected]> Cc: Jun Piao <[email protected]> Cc: <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
The parse_build_id_buf does not account Elf32_Nhdr header size when getting the build id data pointer and returns wrong build id data as result. This is problem only for stable trees that merged c83a80d8b84f fix, the upstream build id code was refactored and returns proper build id. Acked-by: Andrii Nakryiko <[email protected]> Fixes: c83a80d8b84f ("lib/buildid: harden build ID parsing logic") Signed-off-by: Jiri Olsa <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
commit a4aebaf6e6efff548b01a3dc49b4b9074751c15b upstream. When CONFIG_DVB_DYNAMIC_MINORS, ret is not initialized, and a semaphore is left at the wrong state, in case of errors. Make the code simpler and avoid mistakes by having just one error check logic used weather DVB_DYNAMIC_MINORS is used or not. Reported-by: kernel test robot <[email protected]> Reported-by: Dan Carpenter <[email protected]> Closes: https://lore.kernel.org/r/[email protected]/ Signed-off-by: Mauro Carvalho Chehab <[email protected]> Link: https://lore.kernel.org/r/9e067488d8935b8cf00959764a1fa5de85d65725.1730926254.git.mchehab+huawei@kernel.org Cc: Nathan Chancellor <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
[ Upstream commit 15d1975 ] Prepare for adding server copy trace points. Signed-off-by: Dai Ngo <[email protected]> Tested-by: Chen Hanxiao <[email protected]> Stable-dep-of: 9ed666eba4e0 ("NFSD: Async COPY result needs to return a write verifier") Signed-off-by: Chuck Lever <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
[ Upstream commit 9ed666eba4e0a2bb8ffaa3739d830b64d4f2aaad ] Currently, when NFSD handles an asynchronous COPY, it returns a zero write verifier, relying on the subsequent CB_OFFLOAD callback to pass the write verifier and a stable_how4 value to the client. However, if the CB_OFFLOAD never arrives at the client (for example, if a network partition occurs just as the server sends the CB_OFFLOAD operation), the client will never receive this verifier. Thus, if the client sends a follow-up COMMIT, there is no way for the client to assess the COMMIT result. The usual recovery for a missing CB_OFFLOAD is for the client to send an OFFLOAD_STATUS operation, but that operation does not carry a write verifier in its result. Neither does it carry a stable_how4 value, so the client /must/ send a COMMIT in this case -- which will always fail because currently there's still no write verifier in the COPY result. Thus the server needs to return a normal write verifier in its COPY result even if the COPY operation is to be performed asynchronously. If the server recognizes the callback stateid in subsequent OFFLOAD_STATUS operations, then obviously it has not restarted, and the write verifier the client received in the COPY result is still valid and can be used to assess a COMMIT of the copied data, if one is needed. Reviewed-by: Jeff Layton <[email protected]> [ cel: adjusted to apply to origin/linux-6.6.y ] Signed-off-by: Chuck Lever <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
[ Upstream commit aadc3bbea163b6caaaebfdd2b6c4667fbc726752 ] Nothing appears to limit the number of concurrent async COPY operations that clients can start. In addition, AFAICT each async COPY can copy an unlimited number of 4MB chunks, so can run for a long time. Thus IMO async COPY can become a DoS vector. Add a restriction mechanism that bounds the number of concurrent background COPY operations. Start simple and try to be fair -- this patch implements a per-namespace limit. An async COPY request that occurs while this limit is exceeded gets NFS4ERR_DELAY. The requesting client can choose to send the request again after a delay or fall back to a traditional read/write style copy. If there is need to make the mechanism more sophisticated, we can visit that in future patches. Cc: [email protected] Reviewed-by: Jeff Layton <[email protected]> Link: https://nvd.nist.gov/vuln/detail/CVE-2024-49974 Signed-off-by: Chuck Lever <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
[ Upstream commit 63fab04cbd0f96191b6e5beedc3b643b01c15889 ] Ensure the refcount and async_copies fields are initialized early. cleanup_async_copy() will reference these fields if an error occurs in nfsd4_copy(). If they are not correctly initialized, at the very least, a refcount underflow occurs. Reported-by: Olga Kornievskaia <[email protected]> Fixes: aadc3bbea163 ("NFSD: Limit the number of concurrent async COPY operations") Reviewed-by: Jeff Layton <[email protected]> Tested-by: Olga Kornievskaia <[email protected]> Signed-off-by: Chuck Lever <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
[ Upstream commit 8286f8b622990194207df9ab852e0f87c60d35e9 ] The error flow in nfsd4_copy() calls cleanup_async_copy(), which already decrements nn->pending_async_copies. Reported-by: Olga Kornievskaia <[email protected]> Fixes: aadc3bbea163 ("NFSD: Limit the number of concurrent async COPY operations") Signed-off-by: Chuck Lever <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
commit 14cb0e0 upstream. '(struct sock *)msk' is used several times in mptcp_nl_cmd_announce(), mptcp_nl_cmd_remove() or mptcp_userspace_pm_set_flags() in pm_userspace.c, it's worth adding a local variable sk to point it. Reviewed-by: Matthieu Baerts <[email protected]> Signed-off-by: Geliang Tang <[email protected]> Signed-off-by: Mat Martineau <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]> Stable-dep-of: 06afe09 ("mptcp: add userspace_pm_lookup_addr_by_id helper") Signed-off-by: Matthieu Baerts (NGI0) <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
commit 06afe09 upstream. Corresponding __lookup_addr_by_id() helper in the in-kernel netlink PM, this patch adds a new helper mptcp_userspace_pm_lookup_addr_by_id() to lookup the address entry with the given id on the userspace pm local address list. Signed-off-by: Geliang Tang <[email protected]> Reviewed-by: Matthieu Baerts (NGI0) <[email protected]> Reviewed-by: Mat Martineau <[email protected]> Signed-off-by: Matthieu Baerts (NGI0) <[email protected]> Signed-off-by: David S. Miller <[email protected]> Stable-dep-of: f642c5c4d528 ("mptcp: hold pm lock when deleting entry") Signed-off-by: Matthieu Baerts (NGI0) <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
commit e0266319413d5d687ba7b6df7ca99e4b9724a4f2 upstream. Just like in-kernel pm, when userspace pm does set_flags, it needs to send out MP_PRIO signal, and also modify the flags of the corresponding address entry in the local address list. This patch implements the missing logic. Traverse all address entries on userspace_pm_local_addr_list to find the local address entry, if bkup is true, set the flags of this entry with FLAG_BACKUP, otherwise, clear FLAG_BACKUP. Fixes: 892f396 ("mptcp: netlink: issue MP_PRIO signals from userspace PMs") Cc: [email protected] Signed-off-by: Geliang Tang <[email protected]> Reviewed-by: Matthieu Baerts (NGI0) <[email protected]> Signed-off-by: Matthieu Baerts (NGI0) <[email protected]> Link: https://patch.msgid.link/[email protected] Signed-off-by: Jakub Kicinski <[email protected]> [ Conflicts in pm_userspace.c, because commit 6a42477 ("mptcp: update set_flags interfaces"), is not in this version, and causes too many conflicts when backporting it. The same code can still be added at the same place, before sending the ACK. ] Signed-off-by: Matthieu Baerts (NGI0) <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
commit f642c5c4d528d11bd78b6c6f84f541cd3c0bea86 upstream. When traversing userspace_pm_local_addr_list and deleting an entry from it in mptcp_pm_nl_remove_doit(), msk->pm.lock should be held. This patch holds this lock before mptcp_userspace_pm_lookup_addr_by_id() and releases it after list_move() in mptcp_pm_nl_remove_doit(). Fixes: d9a4594 ("mptcp: netlink: Add MPTCP_PM_CMD_REMOVE") Cc: [email protected] Signed-off-by: Geliang Tang <[email protected]> Reviewed-by: Matthieu Baerts (NGI0) <[email protected]> Signed-off-by: Matthieu Baerts (NGI0) <[email protected]> Link: https://patch.msgid.link/[email protected] Signed-off-by: Jakub Kicinski <[email protected]> Signed-off-by: Matthieu Baerts (NGI0) <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
commit af250c2 upstream. When the lookup_by_id parameter of __lookup_addr() is true, it's the same as __lookup_addr_by_id(), it can be replaced by __lookup_addr_by_id() directly. So drop this parameter, let __lookup_addr() only looks up address on the local address list by comparing addresses in it, not address ids. Signed-off-by: Geliang Tang <[email protected]> Reviewed-by: Matthieu Baerts (NGI0) <[email protected]> Signed-off-by: Matthieu Baerts (NGI0) <[email protected]> Link: https://lore.kernel.org/r/20240305-upstream-net-next-20240304-mptcp-misc-cleanup-v1-4-c436ba5e569b@kernel.org Signed-off-by: Jakub Kicinski <[email protected]> Stable-dep-of: db3eab8110bc ("mptcp: pm: use _rcu variant under rcu_read_lock") [ Conflicts in pm_netlink.c, because commit 6a42477 ("mptcp: update set_flags interfaces") is not in this version, and causes too many conflicts when backporting it. The conflict is easy to resolve: addr is a pointer here here in mptcp_pm_nl_set_flags(), the rest of the code is the same. ] Signed-off-by: Matthieu Baerts (NGI0) <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
commit db3eab8110bc0520416101b6a5b52f44a43fb4cf upstream. In mptcp_pm_create_subflow_or_signal_addr(), rcu_read_(un)lock() are used as expected to iterate over the list of local addresses, but list_for_each_entry() was used instead of list_for_each_entry_rcu() in __lookup_addr(). It is important to use this variant which adds the required READ_ONCE() (and diagnostic checks if enabled). Because __lookup_addr() is also used in mptcp_pm_nl_set_flags() where it is called under the pernet->lock and not rcu_read_lock(), an extra condition is then passed to help the diagnostic checks making sure either the associated spin lock or the RCU lock is held. Fixes: 86e39e0 ("mptcp: keep track of local endpoint still available for each msk") Cc: [email protected] Reviewed-by: Geliang Tang <[email protected]> Signed-off-by: Matthieu Baerts (NGI0) <[email protected]> Link: https://patch.msgid.link/[email protected] Signed-off-by: Jakub Kicinski <[email protected]> Signed-off-by: Matthieu Baerts (NGI0) <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
commit 4aa923a6e6406b43566ef6ac35a3d9a3197fa3e8 upstream. KASAN reports that the GPU metrics table allocated in vangogh_tables_init() is not large enough for the memset done in smu_cmn_init_soft_gpu_metrics(). Condensed report follows: [ 33.861314] BUG: KASAN: slab-out-of-bounds in smu_cmn_init_soft_gpu_metrics+0x73/0x200 [amdgpu] [ 33.861799] Write of size 168 at addr ffff888129f59500 by task mangoapp/1067 ... [ 33.861808] CPU: 6 UID: 1000 PID: 1067 Comm: mangoapp Tainted: G W 6.12.0-rc4 deepin-community#356 1a56f59a8b5182eeaf67eb7cb8b13594dd23b544 [ 33.861816] Tainted: [W]=WARN [ 33.861818] Hardware name: Valve Galileo/Galileo, BIOS F7G0107 12/01/2023 [ 33.861822] Call Trace: [ 33.861826] <TASK> [ 33.861829] dump_stack_lvl+0x66/0x90 [ 33.861838] print_report+0xce/0x620 [ 33.861853] kasan_report+0xda/0x110 [ 33.862794] kasan_check_range+0xfd/0x1a0 [ 33.862799] __asan_memset+0x23/0x40 [ 33.862803] smu_cmn_init_soft_gpu_metrics+0x73/0x200 [amdgpu 13b1bc364ec578808f676eba412c20eaab792779] [ 33.863306] vangogh_get_gpu_metrics_v2_4+0x123/0xad0 [amdgpu 13b1bc364ec578808f676eba412c20eaab792779] [ 33.864257] vangogh_common_get_gpu_metrics+0xb0c/0xbc0 [amdgpu 13b1bc364ec578808f676eba412c20eaab792779] [ 33.865682] amdgpu_dpm_get_gpu_metrics+0xcc/0x110 [amdgpu 13b1bc364ec578808f676eba412c20eaab792779] [ 33.866160] amdgpu_get_gpu_metrics+0x154/0x2d0 [amdgpu 13b1bc364ec578808f676eba412c20eaab792779] [ 33.867135] dev_attr_show+0x43/0xc0 [ 33.867147] sysfs_kf_seq_show+0x1f1/0x3b0 [ 33.867155] seq_read_iter+0x3f8/0x1140 [ 33.867173] vfs_read+0x76c/0xc50 [ 33.867198] ksys_read+0xfb/0x1d0 [ 33.867214] do_syscall_64+0x90/0x160 ... [ 33.867353] Allocated by task 378 on cpu 7 at 22.794876s: [ 33.867358] kasan_save_stack+0x33/0x50 [ 33.867364] kasan_save_track+0x17/0x60 [ 33.867367] __kasan_kmalloc+0x87/0x90 [ 33.867371] vangogh_init_smc_tables+0x3f9/0x840 [amdgpu] [ 33.867835] smu_sw_init+0xa32/0x1850 [amdgpu] [ 33.868299] amdgpu_device_init+0x467b/0x8d90 [amdgpu] [ 33.868733] amdgpu_driver_load_kms+0x19/0xf0 [amdgpu] [ 33.869167] amdgpu_pci_probe+0x2d6/0xcd0 [amdgpu] [ 33.869608] local_pci_probe+0xda/0x180 [ 33.869614] pci_device_probe+0x43f/0x6b0 Empirically we can confirm that the former allocates 152 bytes for the table, while the latter memsets the 168 large block. Root cause appears that when GPU metrics tables for v2_4 parts were added it was not considered to enlarge the table to fit. The fix in this patch is rather "brute force" and perhaps later should be done in a smarter way, by extracting and consolidating the part version to size logic to a common helper, instead of brute forcing the largest possible allocation. Nevertheless, for now this works and fixes the out of bounds write. v2: * Drop impossible v3_0 case. (Mario) Signed-off-by: Tvrtko Ursulin <[email protected]> Fixes: 41cec40 ("drm/amd/pm: Vangogh: Add new gpu_metrics_v2_4 to acquire gpu_metrics") Cc: Mario Limonciello <[email protected]> Cc: Evan Quan <[email protected]> Cc: Wenyou Yang <[email protected]> Cc: Alex Deucher <[email protected]> Reviewed-by: Mario Limonciello <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Mario Limonciello <[email protected]> Signed-off-by: Alex Deucher <[email protected]> (cherry picked from commit 0880f58f9609f0200483a49429af0f050d281703) Cc: [email protected] # v6.6+ Signed-off-by: Bin Lan <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
[ Upstream commit 6630036 ] If an iget fails due to not being able to retrieve information from the server then the inode structure is only partially initialized. When the inode gets evicted, references to uninitialized structures (like fscache cookies) were being made. This patch checks for a bad_inode before doing anything other than clearing the inode from the cache. Since the inode is bad, it shouldn't have any state associated with it that needs to be written back (and there really isn't a way to complete those anyways). Reported-by: [email protected] Signed-off-by: Eric Van Hensbergen <[email protected]> Signed-off-by: Sasha Levin <[email protected]> [Xiangyu: CVE-2024-36923 Minor conflict resolution ] Signed-off-by: Xiangyu Chen <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
commit efc347b upstream. In this driver LEDs are registered using devm_led_classdev_register() so they are automatically unregistered after module's remove() is done. led_classdev_unregister() calls module's led_set_brightness() to turn off the LEDs and that callback uses mutex which was destroyed already in module's remove() so use devm API instead. Signed-off-by: George Stark <[email protected]> Reviewed-by: Andy Shevchenko <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Lee Jones <[email protected]> [ Resolve minor conflicts to fix CVE-2024-42129 ] Signed-off-by: Bin Lan <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
[ Upstream commit 3dd6ed34ce1f2356a77fb88edafb5ec96784e3cf ]
Patch series "fix error handling in mmap_region() and refactor
(hotfixes)", v4.
mmap_region() is somewhat terrifying, with spaghetti-like control flow and
numerous means by which issues can arise and incomplete state, memory
leaks and other unpleasantness can occur.
A large amount of the complexity arises from trying to handle errors late
in the process of mapping a VMA, which forms the basis of recently
observed issues with resource leaks and observable inconsistent state.
This series goes to great lengths to simplify how mmap_region() works and
to avoid unwinding errors late on in the process of setting up the VMA for
the new mapping, and equally avoids such operations occurring while the
VMA is in an inconsistent state.
The patches in this series comprise the minimal changes required to
resolve existing issues in mmap_region() error handling, in order that
they can be hotfixed and backported. There is additionally a follow up
series which goes further, separated out from the v1 series and sent and
updated separately.
This patch (of 5):
After an attempted mmap() fails, we are no longer in a situation where we
can safely interact with VMA hooks. This is currently not enforced,
meaning that we need complicated handling to ensure we do not incorrectly
call these hooks.
We can avoid the whole issue by treating the VMA as suspect the moment
that the file->f_ops->mmap() function reports an error by replacing
whatever VMA operations were installed with a dummy empty set of VMA
operations.
We do so through a new helper function internal to mm - mmap_file() -
which is both more logically named than the existing call_mmap() function
and correctly isolates handling of the vm_op reassignment to mm.
All the existing invocations of call_mmap() outside of mm are ultimately
nested within the call_mmap() from mm, which we now replace.
It is therefore safe to leave call_mmap() in place as a convenience
function (and to avoid churn). The invokers are:
ovl_file_operations -> mmap -> ovl_mmap() -> backing_file_mmap()
coda_file_operations -> mmap -> coda_file_mmap()
shm_file_operations -> shm_mmap()
shm_file_operations_huge -> shm_mmap()
dma_buf_fops -> dma_buf_mmap_internal -> i915_dmabuf_ops
-> i915_gem_dmabuf_mmap()
None of these callers interact with vm_ops or mappings in a problematic
way on error, quickly exiting out.
Link: https://lkml.kernel.org/r/[email protected]
Link: https://lkml.kernel.org/r/d41fd763496fd0048a962f3fd9407dc72dd4fd86.1730224667.git.lorenzo.stoakes@oracle.com
Fixes: deb0f65 ("mm/mmap: undo ->mmap() when arch_validate_flags() fails")
Signed-off-by: Lorenzo Stoakes <[email protected]>
Reported-by: Jann Horn <[email protected]>
Reviewed-by: Liam R. Howlett <[email protected]>
Reviewed-by: Vlastimil Babka <[email protected]>
Reviewed-by: Jann Horn <[email protected]>
Cc: Andreas Larsson <[email protected]>
Cc: Catalin Marinas <[email protected]>
Cc: David S. Miller <[email protected]>
Cc: Helge Deller <[email protected]>
Cc: James E.J. Bottomley <[email protected]>
Cc: Linus Torvalds <[email protected]>
Cc: Mark Brown <[email protected]>
Cc: Peter Xu <[email protected]>
Cc: Will Deacon <[email protected]>
Cc: <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Lorenzo Stoakes <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
[ Upstream commit 4080ef1579b2413435413988d14ac8c68e4d42c8 ] Incorrect invocation of VMA callbacks when the VMA is no longer in a consistent state is bug prone and risky to perform. With regards to the important vm_ops->close() callback We have gone to great lengths to try to track whether or not we ought to close VMAs. Rather than doing so and risking making a mistake somewhere, instead unconditionally close and reset vma->vm_ops to an empty dummy operations set with a NULL .close operator. We introduce a new function to do so - vma_close() - and simplify existing vms logic which tracked whether we needed to close or not. This simplifies the logic, avoids incorrect double-calling of the .close() callback and allows us to update error paths to simply call vma_close() unconditionally - making VMA closure idempotent. Link: https://lkml.kernel.org/r/28e89dda96f68c505cb6f8e9fc9b57c3e9f74b42.1730224667.git.lorenzo.stoakes@oracle.com Fixes: deb0f65 ("mm/mmap: undo ->mmap() when arch_validate_flags() fails") Signed-off-by: Lorenzo Stoakes <[email protected]> Reported-by: Jann Horn <[email protected]> Reviewed-by: Vlastimil Babka <[email protected]> Reviewed-by: Liam R. Howlett <[email protected]> Reviewed-by: Jann Horn <[email protected]> Cc: Andreas Larsson <[email protected]> Cc: Catalin Marinas <[email protected]> Cc: David S. Miller <[email protected]> Cc: Helge Deller <[email protected]> Cc: James E.J. Bottomley <[email protected]> Cc: Linus Torvalds <[email protected]> Cc: Mark Brown <[email protected]> Cc: Peter Xu <[email protected]> Cc: Will Deacon <[email protected]> Cc: <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Lorenzo Stoakes <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
[ Upstream commit 0fb4a7ad270b3b209e510eb9dc5b07bf02b7edaf ] Refactor the map_deny_write_exec() to not unnecessarily require a VMA parameter but rather to accept VMA flags parameters, which allows us to use this function early in mmap_region() in a subsequent commit. While we're here, we refactor the function to be more readable and add some additional documentation. Link: https://lkml.kernel.org/r/6be8bb59cd7c68006ebb006eb9d8dc27104b1f70.1730224667.git.lorenzo.stoakes@oracle.com Fixes: deb0f65 ("mm/mmap: undo ->mmap() when arch_validate_flags() fails") Signed-off-by: Lorenzo Stoakes <[email protected]> Reported-by: Jann Horn <[email protected]> Reviewed-by: Liam R. Howlett <[email protected]> Reviewed-by: Vlastimil Babka <[email protected]> Reviewed-by: Jann Horn <[email protected]> Cc: Andreas Larsson <[email protected]> Cc: Catalin Marinas <[email protected]> Cc: David S. Miller <[email protected]> Cc: Helge Deller <[email protected]> Cc: James E.J. Bottomley <[email protected]> Cc: Linus Torvalds <[email protected]> Cc: Mark Brown <[email protected]> Cc: Peter Xu <[email protected]> Cc: Will Deacon <[email protected]> Cc: <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Lorenzo Stoakes <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
[ Upstream commit 5baf8b037debf4ec60108ccfeccb8636d1dbad81 ] Currently MTE is permitted in two circumstances (desiring to use MTE having been specified by the VM_MTE flag) - where MAP_ANONYMOUS is specified, as checked by arch_calc_vm_flag_bits() and actualised by setting the VM_MTE_ALLOWED flag, or if the file backing the mapping is shmem, in which case we set VM_MTE_ALLOWED in shmem_mmap() when the mmap hook is activated in mmap_region(). The function that checks that, if VM_MTE is set, VM_MTE_ALLOWED is also set is the arm64 implementation of arch_validate_flags(). Unfortunately, we intend to refactor mmap_region() to perform this check earlier, meaning that in the case of a shmem backing we will not have invoked shmem_mmap() yet, causing the mapping to fail spuriously. It is inappropriate to set this architecture-specific flag in general mm code anyway, so a sensible resolution of this issue is to instead move the check somewhere else. We resolve this by setting VM_MTE_ALLOWED much earlier in do_mmap(), via the arch_calc_vm_flag_bits() call. This is an appropriate place to do this as we already check for the MAP_ANONYMOUS case here, and the shmem file case is simply a variant of the same idea - we permit RAM-backed memory. This requires a modification to the arch_calc_vm_flag_bits() signature to pass in a pointer to the struct file associated with the mapping, however this is not too egregious as this is only used by two architectures anyway - arm64 and parisc. So this patch performs this adjustment and removes the unnecessary assignment of VM_MTE_ALLOWED in shmem_mmap(). [[email protected]: fix whitespace, per Catalin] Link: https://lkml.kernel.org/r/ec251b20ba1964fb64cf1607d2ad80c47f3873df.1730224667.git.lorenzo.stoakes@oracle.com Fixes: deb0f65 ("mm/mmap: undo ->mmap() when arch_validate_flags() fails") Signed-off-by: Lorenzo Stoakes <[email protected]> Suggested-by: Catalin Marinas <[email protected]> Reported-by: Jann Horn <[email protected]> Reviewed-by: Catalin Marinas <[email protected]> Reviewed-by: Vlastimil Babka <[email protected]> Cc: Andreas Larsson <[email protected]> Cc: David S. Miller <[email protected]> Cc: Helge Deller <[email protected]> Cc: James E.J. Bottomley <[email protected]> Cc: Liam R. Howlett <[email protected]> Cc: Linus Torvalds <[email protected]> Cc: Mark Brown <[email protected]> Cc: Peter Xu <[email protected]> Cc: Will Deacon <[email protected]> Cc: <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Lorenzo Stoakes <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
[ Upstream commit 5de195060b2e251a835f622759550e6202167641 ] The mmap_region() function is somewhat terrifying, with spaghetti-like control flow and numerous means by which issues can arise and incomplete state, memory leaks and other unpleasantness can occur. A large amount of the complexity arises from trying to handle errors late in the process of mapping a VMA, which forms the basis of recently observed issues with resource leaks and observable inconsistent state. Taking advantage of previous patches in this series we move a number of checks earlier in the code, simplifying things by moving the core of the logic into a static internal function __mmap_region(). Doing this allows us to perform a number of checks up front before we do any real work, and allows us to unwind the writable unmap check unconditionally as required and to perform a CONFIG_DEBUG_VM_MAPLE_TREE validation unconditionally also. We move a number of things here: 1. We preallocate memory for the iterator before we call the file-backed memory hook, allowing us to exit early and avoid having to perform complicated and error-prone close/free logic. We carefully free iterator state on both success and error paths. 2. The enclosing mmap_region() function handles the mapping_map_writable() logic early. Previously the logic had the mapping_map_writable() at the point of mapping a newly allocated file-backed VMA, and a matching mapping_unmap_writable() on success and error paths. We now do this unconditionally if this is a file-backed, shared writable mapping. If a driver changes the flags to eliminate VM_MAYWRITE, however doing so does not invalidate the seal check we just performed, and we in any case always decrement the counter in the wrapper. We perform a debug assert to ensure a driver does not attempt to do the opposite. 3. We also move arch_validate_flags() up into the mmap_region() function. This is only relevant on arm64 and sparc64, and the check is only meaningful for SPARC with ADI enabled. We explicitly add a warning for this arch if a driver invalidates this check, though the code ought eventually to be fixed to eliminate the need for this. With all of these measures in place, we no longer need to explicitly close the VMA on error paths, as we place all checks which might fail prior to a call to any driver mmap hook. This eliminates an entire class of errors, makes the code easier to reason about and more robust. Link: https://lkml.kernel.org/r/6e0becb36d2f5472053ac5d544c0edfe9b899e25.1730224667.git.lorenzo.stoakes@oracle.com Fixes: deb0f65 ("mm/mmap: undo ->mmap() when arch_validate_flags() fails") Signed-off-by: Lorenzo Stoakes <[email protected]> Reported-by: Jann Horn <[email protected]> Reviewed-by: Liam R. Howlett <[email protected]> Reviewed-by: Vlastimil Babka <[email protected]> Tested-by: Mark Brown <[email protected]> Cc: Andreas Larsson <[email protected]> Cc: Catalin Marinas <[email protected]> Cc: David S. Miller <[email protected]> Cc: Helge Deller <[email protected]> Cc: James E.J. Bottomley <[email protected]> Cc: Linus Torvalds <[email protected]> Cc: Peter Xu <[email protected]> Cc: Will Deacon <[email protected]> Cc: <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Lorenzo Stoakes <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
commit e9e3db6 upstream. kdamond_apply_schemes() checks apply intervals of schemes and avoid further applying any schemes if no scheme passed its apply interval. However, the following schemes applying function, damon_do_apply_schemes() iterates all schemes without the apply interval check. As a result, the shortest apply interval is applied to all schemes. Fix the problem by checking the apply interval in damon_do_apply_schemes(). Link: https://lkml.kernel.org/r/[email protected] Fixes: 42f994b ("mm/damon/core: implement scheme-specific apply interval") Signed-off-by: SeongJae Park <[email protected]> Cc: <[email protected]> [6.7.x] Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
commit 8e7bde615f634a82a44b1f3d293c049fd3ef9ca9 upstream. DAMON's logics to determine if this is the time to apply damos schemes assumes next_apply_sis is always set larger than current passed_sample_intervals. And therefore assume continuously incrementing passed_sample_intervals will make it reaches to the next_apply_sis in future. The logic hence does apply the scheme and update next_apply_sis only if passed_sample_intervals is same to next_apply_sis. If Schemes apply interval is set as zero, however, next_apply_sis is set same to current passed_sample_intervals, respectively. And passed_sample_intervals is incremented before doing the next_apply_sis check. Hence, next_apply_sis becomes larger than next_apply_sis, and the logic says it is not the time to apply schemes and update next_apply_sis. In other words, DAMON stops applying schemes until passed_sample_intervals overflows. Based on the documents and the common sense, a reasonable behavior for such inputs would be applying the schemes for every sampling interval. Handle the case by removing the assumption. Link: https://lkml.kernel.org/r/[email protected] Fixes: 42f994b ("mm/damon/core: implement scheme-specific apply interval") Signed-off-by: SeongJae Park <[email protected]> Cc: <[email protected]> [6.7.x] Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
commit 1f3730f upstream. Regions split function ('damon_split_region_at()') is called at the beginning of an aggregation interval, and when DAMOS applying the actions and charging quota. Because 'nr_accesses' fields of all regions are reset at the beginning of each aggregation interval, and DAMOS was applying the action at the end of each aggregation interval, there was no need to copy the 'nr_accesses' field to the split-out region. However, commit 42f994b ("mm/damon/core: implement scheme-specific apply interval") made DAMOS applies action on its own timing interval. Hence, 'nr_accesses' should also copied to split-out regions, but the commit didn't. Fix it by copying it. Link: https://lkml.kernel.org/r/[email protected] Fixes: 42f994b ("mm/damon/core: implement scheme-specific apply interval") Signed-off-by: SeongJae Park <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
Link: https://lore.kernel.org/r/[email protected] Tested-by: Mark Brown <[email protected]> Tested-by: SeongJae Park <[email protected]> Tested-by: Florian Fainelli <[email protected]> Tested-by: Shuah Khan <[email protected]> Tested-by: Ron Economos <[email protected]> Tested-by: Linux Kernel Functional Testing <[email protected]> Tested-by: Hardik Garg [email protected]=0A= Tested-by: Jon Hunter <[email protected]> Tested-by: kernelci.org bot <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
Avenger-285714
force-pushed
the
6.6.63
branch
from
07f0213 to
cd9060f
Compare
This comment was marked as duplicate.
This comment was marked as duplicate.
|
测试通过 |
Avenger-285714
merged commit f658001
into
deepin-community:linux-6.6.y
3 of 5 checks passed
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment
Add this suggestion to a batch that can be applied as a single commit.
This suggestion is invalid because no changes were made to the code.
Suggestions cannot be applied while the pull request is closed.
Suggestions cannot be applied while viewing a subset of changes.
Only one suggestion per line can be applied in a batch.
Add this suggestion to a batch that can be applied as a single commit.
Applying suggestions on deleted lines is not supported.
You must change the existing code in this line in order to create a valid suggestion.
Outdated suggestions cannot be applied.
This suggestion has been applied or marked resolved.
Suggestions cannot be applied from pending reviews.
Suggestions cannot be applied on multi-line comments.
Suggestions cannot be applied while the pull request is queued to merge.
Suggestion cannot be applied right now. Please check back later.
Update kernel base to 6.6.63
Drop commit 16abd7ce81e4 ("nouveau: fw: sync dma after setup is called.")