[Deepin-Kernel-SIG][Upstream]Update kernel base to 6.6.31 #162
Conversation
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
[ Upstream commit fcee206 ] In qede_add_tc_flower_fltr(), when calling qede_parse_flow_attr() then the return code was only used for a non-zero check, and then -EINVAL was returned. qede_parse_flow_attr() can currently fail with: * -EINVAL * -EOPNOTSUPP * -EPROTONOSUPPORT This patch changes the code to use the actual return code, not just return -EINVAL. The blaimed commit introduced these functions. Only compile tested. Fixes: 2ce9c93 ("qede: Ingress tc flower offload (drop action) support.") Signed-off-by: Asbjørn Sloth Tønnesen <[email protected]> Reviewed-by: Simon Horman <[email protected]> Signed-off-by: David S. Miller <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
[ Upstream commit 27b4441 ] In qede_flow_spec_to_rule(), when calling qede_parse_flow_attr() then the return code was only used for a non-zero check, and then -EINVAL was returned. qede_parse_flow_attr() can currently fail with: * -EINVAL * -EOPNOTSUPP * -EPROTONOSUPPORT This patch changes the code to use the actual return code, not just return -EINVAL. The blaimed commit introduced qede_flow_spec_to_rule(), and this call to qede_parse_flow_attr(), it looks like it just duplicated how it was already used. Only compile tested. Fixes: 37c5d3e ("qede: use ethtool_rx_flow_rule() to remove duplicated parser code") Signed-off-by: Asbjørn Sloth Tønnesen <[email protected]> Reviewed-by: Simon Horman <[email protected]> Signed-off-by: David S. Miller <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
[ Upstream commit f26f719 ] When calling qede_parse_actions() then the return code was only used for a non-zero check, and then -EINVAL was returned. qede_parse_actions() can currently fail with: * -EINVAL * -EOPNOTSUPP This patch changes the code to use the actual return code, not just return -EINVAL. The blaimed commit broke the implicit assumption that only -EINVAL would ever be returned. Only compile tested. Fixes: 319a1d1 ("flow_offload: check for basic action hw stats type") Signed-off-by: Asbjørn Sloth Tønnesen <[email protected]> Reviewed-by: Simon Horman <[email protected]> Signed-off-by: David S. Miller <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
[ Upstream commit 6dee402 ] VXLAN devices update their stats locklessly. Therefore these counters should either be stored in per-cpu data structures or the updates should be done using atomic increments. Since the net_device_core_stats infrastructure is already used in vxlan_rcv(), use it for the other rx_dropped and tx_dropped counter updates. Update the other counters atomically using DEV_STATS_INC(). Fixes: d342894 ("vxlan: virtual extensible lan") Signed-off-by: Guillaume Nault <[email protected]> Reviewed-by: Eric Dumazet <[email protected]> Signed-off-by: David S. Miller <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
[ Upstream commit b22ea4e ] VXLAN stores per-VNI statistics using vxlan_vnifilter_count(). These statistics were not updated when arp_reduce() failed its pskb_may_pull() call. Use vxlan_vnifilter_count() to update the VNI counter when that happens. Fixes: 4095e0e ("drivers: vxlan: vnifilter: per vni stats") Signed-off-by: Guillaume Nault <[email protected]> Signed-off-by: David S. Miller <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
[ Upstream commit 9e6f395 ] Use FIELD_GET() and FIELD_PREP() helpers instead of doing it manually. Signed-off-by: Jerome Brunet <[email protected]> Link: https://msgid.link/r/[email protected] Signed-off-by: Mark Brown <[email protected]> Stable-dep-of: b11d266 ("ASoC: meson: axg-fifo: use threaded irq to check periods") Signed-off-by: Sasha Levin <[email protected]>
[ Upstream commit b11d266 ] With the AXG audio subsystem, there is a possible random channel shift on TDM capture, when the slot number per lane is more than 2, and there is more than one lane used. The problem has been there since the introduction of the axg audio support but such scenario is pretty uncommon. This is why there is no loud complains about the problem. Solving the problem require to make the links non-atomic and use the trigger() callback to start FEs and BEs in the appropriate order. This was tried in the past and reverted because it caused the block irq to sleep while atomic. However, instead of reverting, the solution is to call snd_pcm_period_elapsed() in a non atomic context. Use the bottom half of a threaded IRQ to do so. Fixes: 6dc4fa1 ("ASoC: meson: add axg fifo base driver") Signed-off-by: Jerome Brunet <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Mark Brown <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
[ Upstream commit dcba52a ] Non atomic operations need to be performed in the trigger callback of the TDM interfaces. Those are BEs but what matters is the nonatomic flag of the FE in the DPCM context. Just set nonatomic for everything so, at least, what is done is clear. Fixes: 7864a79 ("ASoC: meson: add axg sound card support") Signed-off-by: Jerome Brunet <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Mark Brown <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
[ Upstream commit f949ed4 ] So far, the formatters have been reset/enabled using the .prepare() callback. This was done in this callback because walking the formatters use a mutex. A mutex is used because formatter handling require dealing possibly slow clock operation. With the support of non-atomic, .trigger() callback may be used which also allows to properly enable and disable formatters on start but also pause/resume. This solve a random shift on TDMIN as well repeated samples on for TDMOUT. Fixes: d60e4f1 ("ASoC: meson: add tdm interface driver") Signed-off-by: Jerome Brunet <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Mark Brown <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
[ Upstream commit 6db26f9 ] Amlogic sound cards do create a lot of pcm interfaces, possibly more than 8. Some pcm interfaces are internal (like DPCM backends and c2c) and not exposed to userspace. Those interfaces still increase the number passed to snd_find_free_minor(), which eventually exceeds 8 causing -EBUSY error on card registration if CONFIG_SND_DYNAMIC_MINORS=n and the interface is exposed to userspace. select CONFIG_SND_DYNAMIC_MINORS for Amlogic cards to avoid the problem. Fixes: 7864a79 ("ASoC: meson: add axg sound card support") Signed-off-by: Jerome Brunet <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Mark Brown <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
[ Upstream commit c158cf9 ] The documentation for device_get_named_child_node() mentions this important point: " The caller is responsible for calling fwnode_handle_put() on the returned fwnode pointer. " Add fwnode_handle_put() to avoid a leaked reference. Signed-off-by: Pierre-Louis Bossart <[email protected]> Fixes: 08c2a4b ("ALSA: hda: move Intel SoundWire ACPI scan to dedicated module") Message-ID: <[email protected]> Signed-off-by: Takashi Iwai <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
[ Upstream commit da7c622 ] Currently, we allocate a lbuf-sized kernel buffer and copy lbuf from userspace to that buffer. Later, we use scanf on this buffer but we don't ensure that the string is terminated inside the buffer, this can lead to OOB read when using scanf. Fix this issue by using memdup_user_nul instead. Fixes: a4f17cc ("s390/cio: add CRW inject functionality") Signed-off-by: Bui Quang Minh <[email protected]> Reviewed-by: Heiko Carstens <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Alexander Gordeev <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
[ Upstream commit 9067ecc ] The selftest for the driver sends a dummy packet and checks if the packet will be received properly as it should be. The regular TX path and the selftest can use the same network queue so locking is required and was missing in the selftest path. This was addressed in the commit cited below. Unfortunately locking the TX queue requires BH to be disabled which is not the case in selftest path which is invoked in process context. Lockdep should be complaining about this. Use __netif_tx_lock_bh() for TX queue locking. Fixes: c650e04 ("cxgb4: Fix race between loopback and normal Tx path") Reported-by: "John B. Wyatt IV" <[email protected]> Closes: https://lore.kernel.org/all/Zic0ot5aGgR-V4Ks@thinkpad2021/ Signed-off-by: Sebastian Andrzej Siewior <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
[ Upstream commit b9a61c2 ] The Topaz family (88E6141 and 88E6341) only support 256 Forwarding Information Tables. Fixes: a75961d ("net: dsa: mv88e6xxx: Add support for ethernet switch 88E6341") Fixes: 1558727 ("net: dsa: mv88e6xxx: Add support for ethernet switch 88E6141") Signed-off-by: Marek Behún <[email protected]> Reviewed-by: Andrew Lunn <[email protected]> Reviewed-by: Florian Fainelli <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
[ Upstream commit 705d048 ] This patch adds a missed handling of PL domain doorbell while handling VRAM faults. Cc: Christian Koenig <[email protected]> Cc: Alex Deucher <[email protected]> Fixes: a6ff969 ("drm/amdgpu: fix visible VRAM handling during faults") Reviewed-by: Christian Koenig <[email protected]> Signed-off-by: Shashank Sharma <[email protected]> Signed-off-by: Arvind Yadav <[email protected]> Signed-off-by: Alex Deucher <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
[ Upstream commit 4756fa5 ] If spi_sync() is called with the non-empty queue and the same spi_message is then reused, the complete callback for the message remains set while the context is cleared, leading to a null pointer dereference when the callback is invoked from spi_finalize_current_message(). With function inlining disabled, the call stack might look like this: _raw_spin_lock_irqsave from complete_with_flags+0x18/0x58 complete_with_flags from spi_complete+0x8/0xc spi_complete from spi_finalize_current_message+0xec/0x184 spi_finalize_current_message from spi_transfer_one_message+0x2a8/0x474 spi_transfer_one_message from __spi_pump_transfer_message+0x104/0x230 __spi_pump_transfer_message from __spi_transfer_message_noqueue+0x30/0xc4 __spi_transfer_message_noqueue from __spi_sync+0x204/0x248 __spi_sync from spi_sync+0x24/0x3c spi_sync from mcp251xfd_regmap_crc_read+0x124/0x28c [mcp251xfd] mcp251xfd_regmap_crc_read [mcp251xfd] from _regmap_raw_read+0xf8/0x154 _regmap_raw_read from _regmap_bus_read+0x44/0x70 _regmap_bus_read from _regmap_read+0x60/0xd8 _regmap_read from regmap_read+0x3c/0x5c regmap_read from mcp251xfd_alloc_can_err_skb+0x1c/0x54 [mcp251xfd] mcp251xfd_alloc_can_err_skb [mcp251xfd] from mcp251xfd_irq+0x194/0xe70 [mcp251xfd] mcp251xfd_irq [mcp251xfd] from irq_thread_fn+0x1c/0x78 irq_thread_fn from irq_thread+0x118/0x1f4 irq_thread from kthread+0xd8/0xf4 kthread from ret_from_fork+0x14/0x28 Fix this by also setting message->complete to NULL when the transfer is complete. Fixes: ae7d234 ("spi: Don't use the message queue if possible in spi_sync") Signed-off-by: Mans Rullgard <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Mark Brown <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
[ Upstream commit 59c878c ] Calling skb_copy on a SKB_GSO_FRAGLIST skb is not valid, since it returns an invalid linearized skb. This code only needs to change the ethernet header, so pskb_copy is the right function to call here. Fixes: 6db6f0e ("bridge: multicast to unicast") Signed-off-by: Felix Fietkau <[email protected]> Acked-by: Paolo Abeni <[email protected]> Acked-by: Nikolay Aleksandrov <[email protected]> Signed-off-by: David S. Miller <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
[ Upstream commit d091e57 ] SKB_GSO_FRAGLIST skbs must not be linearized, otherwise they become invalid. Return NULL if such an skb is passed to skb_copy or skb_copy_expand, in order to prevent a crash on a potential later call to skb_gso_segment. Fixes: 3a1296a ("net: Support GRO/GSO fraglist chaining.") Signed-off-by: Felix Fietkau <[email protected]> Signed-off-by: David S. Miller <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
[ Upstream commit 8953285 ] The find connection logic of Transarc's Rx was modified in the mid-1990s to support multi-homed servers which might send a response packet from an address other than the destination address in the received packet. The rules for accepting a packet by an Rx initiator (RX_CLIENT_CONNECTION) were altered to permit acceptance of a packet from any address provided that the port number was unchanged and all of the connection identifiers matched (Epoch, CID, SecurityClass, ...). This change applies the same rules to the Linux implementation which makes it consistent with IBM AFS 3.6, Arla, OpenAFS and AuriStorFS. Fixes: 17926a7 ("[AF_RXRPC]: Provide secure RxRPC sockets for use by userspace and kernel both") Signed-off-by: Jeffrey Altman <[email protected]> Acked-by: David Howells <[email protected]> Signed-off-by: Marc Dionne <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
[ Upstream commit 97bf6f8 ] __skb_linearize() doesn't free the skb when it fails, so move '*buf = NULL' after __skb_linearize(), so that the skb can be freed on the err path. Fixes: b7df21c ("tipc: skb_linearize the head skb when reassembling msgs") Reported-by: Paolo Abeni <[email protected]> Signed-off-by: Xin Long <[email protected]> Reviewed-by: Simon Horman <[email protected]> Reviewed-by: Tung Nguyen <[email protected]> Link: https://lore.kernel.org/r/90710748c29a1521efac4f75ea01b3b7e61414cf.1714485818.git.lucien.xin@gmail.com Signed-off-by: Jakub Kicinski <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
[ Upstream commit f778941 ] Ensure the inner IP header is part of skb's linear data before reading its ECN bits. Otherwise we might read garbage. One symptom is the system erroneously logging errors like "vxlan: non-ECT from xxx.xxx.xxx.xxx with TOS=xxxx". Similar bugs have been fixed in geneve, ip_tunnel and ip6_tunnel (see commit 1ca1ba4 ("geneve: make sure to pull inner header in geneve_rx()") for example). So let's reuse the same code structure for consistency. Maybe we'll can add a common helper in the future. Fixes: d342894 ("vxlan: virtual extensible lan") Signed-off-by: Guillaume Nault <[email protected]> Reviewed-by: Ido Schimmel <[email protected]> Reviewed-by: Eric Dumazet <[email protected]> Reviewed-by: Nikolay Aleksandrov <[email protected]> Reviewed-by: Sabrina Dubroca <[email protected]> Link: https://lore.kernel.org/r/1239c8db54efec341dd6455c77e0380f58923a3c.1714495737.git.gnault@redhat.com Signed-off-by: Jakub Kicinski <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
[ Upstream commit 8a2e4d3 ] Symptom: When the hsuid attribute is set for the first time on an IQD Layer3 device while the corresponding network interface is already UP, the kernel will try to execute a napi function pointer that is NULL. Example: --------------------------------------------------------------------------- [ 2057.572696] illegal operation: 0001 ilc:1 [#1] SMP [ 2057.572702] Modules linked in: af_iucv qeth_l3 zfcp scsi_transport_fc sunrpc nft_fib_inet nft_fib_ipv4 nft_fib_ipv6 nft_fib nft_reject_inet nf_reject_ipv4 nf_reject_ipv6 nft_reject nft_ct nf_tables_set nft_chain_nat nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 ip_set nf_tables libcrc32c nfnetlink ghash_s390 prng xts aes_s390 des_s390 de s_generic sha3_512_s390 sha3_256_s390 sha512_s390 vfio_ccw vfio_mdev mdev vfio_iommu_type1 eadm_sch vfio ext4 mbcache jbd2 qeth_l2 bridge stp llc dasd_eckd_mod qeth dasd_mod qdio ccwgroup pkey zcrypt [ 2057.572739] CPU: 6 PID: 60182 Comm: stress_client Kdump: loaded Not tainted 4.18.0-541.el8.s390x #1 [ 2057.572742] Hardware name: IBM 3931 A01 704 (LPAR) [ 2057.572744] Krnl PSW : 0704f00180000000 0000000000000002 (0x2) [ 2057.572748] R:0 T:1 IO:1 EX:1 Key:0 M:1 W:0 P:0 AS:3 CC:3 PM:0 RI:0 EA:3 [ 2057.572751] Krnl GPRS: 0000000000000004 0000000000000000 00000000a3b008d8 0000000000000000 [ 2057.572754] 00000000a3b008d8 cb923a29c779abc5 0000000000000000 00000000814cfd80 [ 2057.572756] 000000000000012c 0000000000000000 00000000a3b008d8 00000000a3b008d8 [ 2057.572758] 00000000bab6d500 00000000814cfd80 0000000091317e46 00000000814cfc68 [ 2057.572762] Krnl Code:#0000000000000000: 0000 illegal >0000000000000002: 0000 illegal 0000000000000004: 0000 illegal 0000000000000006: 0000 illegal 0000000000000008: 0000 illegal 000000000000000a: 0000 illegal 000000000000000c: 0000 illegal 000000000000000e: 0000 illegal [ 2057.572800] Call Trace: [ 2057.572801] ([<00000000ec639700>] 0xec639700) [ 2057.572803] [<00000000913183e2>] net_rx_action+0x2ba/0x398 [ 2057.572809] [<0000000091515f76>] __do_softirq+0x11e/0x3a0 [ 2057.572813] [<0000000090ce160c>] do_softirq_own_stack+0x3c/0x58 [ 2057.572817] ([<0000000090d2cbd6>] do_softirq.part.1+0x56/0x60) [ 2057.572822] [<0000000090d2cc60>] __local_bh_enable_ip+0x80/0x98 [ 2057.572825] [<0000000091314706>] __dev_queue_xmit+0x2be/0xd70 [ 2057.572827] [<000003ff803dd6d6>] afiucv_hs_send+0x24e/0x300 [af_iucv] [ 2057.572830] [<000003ff803dd88a>] iucv_send_ctrl+0x102/0x138 [af_iucv] [ 2057.572833] [<000003ff803de72a>] iucv_sock_connect+0x37a/0x468 [af_iucv] [ 2057.572835] [<00000000912e7e90>] __sys_connect+0xa0/0xd8 [ 2057.572839] [<00000000912e9580>] sys_socketcall+0x228/0x348 [ 2057.572841] [<0000000091514e1a>] system_call+0x2a6/0x2c8 [ 2057.572843] Last Breaking-Event-Address: [ 2057.572844] [<0000000091317e44>] __napi_poll+0x4c/0x1d8 [ 2057.572846] [ 2057.572847] Kernel panic - not syncing: Fatal exception in interrupt ------------------------------------------------------------------------------------------- Analysis: There is one napi structure per out_q: card->qdio.out_qs[i].napi The napi.poll functions are set during qeth_open(). Since commit 1cfef80 ("s390/qeth: Don't call dev_close/dev_open (DOWN/UP)") qeth_set_offline()/qeth_set_online() no longer call dev_close()/ dev_open(). So if qeth_free_qdio_queues() cleared card->qdio.out_qs[i].napi.poll while the network interface was UP and the card was offline, they are not set again. Reproduction: chzdev -e $devno layer2=0 ip link set dev $network_interface up echo 0 > /sys/bus/ccwgroup/devices/0.0.$devno/online echo foo > /sys/bus/ccwgroup/devices/0.0.$devno/hsuid echo 1 > /sys/bus/ccwgroup/devices/0.0.$devno/online -> Crash (can be enforced e.g. by af_iucv connect(), ip link down/up, ...) Note that a Completion Queue (CQ) is only enabled or disabled, when hsuid is set for the first time or when it is removed. Workarounds: - Set hsuid before setting the device online for the first time or - Use chzdev -d $devno; chzdev $devno hsuid=xxx; chzdev -e $devno; to set hsuid on an existing device. (this will remove and recreate the network interface) Fix: There is no need to free the output queues when a completion queue is added or removed. card->qdio.state now indicates whether the inbound buffer pool and the outbound queues are allocated. card->qdio.c_q indicates whether a CQ is allocated. Fixes: 1cfef80 ("s390/qeth: Don't call dev_close/dev_open (DOWN/UP)") Signed-off-by: Alexandra Winter <[email protected]> Reviewed-by: Simon Horman <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Paolo Abeni <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
[ Upstream commit d43cd48 ] It seems driver missed the point of proper use of device property APIs. Correct this by updating headers and calls respectively. Fixes: 5a04227 ("drm/panel: Add ilitek ili9341 panel driver") Signed-off-by: Andy Shevchenko <[email protected]> Reviewed-by: Dmitry Baryshkov <[email protected]> Reviewed-by: Neil Armstrong <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Neil Armstrong <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected] Signed-off-by: Sasha Levin <[email protected]>
[ Upstream commit 740fc1e ] GPIO controller might not be available when driver is being probed. There are plenty of reasons why, one of which is deferred probe. Since GPIOs are optional, return any error code we got to the upper layer, including deferred probe. With that in mind, use dev_err_probe() in order to avoid spamming the logs. Fixes: 5a04227 ("drm/panel: Add ilitek ili9341 panel driver") Signed-off-by: Andy Shevchenko <[email protected]> Reviewed-by: Dmitry Baryshkov <[email protected]> Reviewed-by: Neil Armstrong <[email protected]> Reviewed-by: Sui Jingfeng <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Neil Armstrong <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected] Signed-off-by: Sasha Levin <[email protected]>
[ Upstream commit da85f0a ] In one case the -1 is returned which is quite confusing code for the wrong device ID, in another the ret is returning instead of plain 0 that also confusing as readed may ask the possible meaning of positive codes, which are never the case there. Convert both to use explicit predefined error codes to make it clear what's going on there. Fixes: 5a04227 ("drm/panel: Add ilitek ili9341 panel driver") Signed-off-by: Andy Shevchenko <[email protected]> Reviewed-by: Neil Armstrong <[email protected]> Reviewed-by: Sui Jingfeng <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Neil Armstrong <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected] Signed-off-by: Sasha Levin <[email protected]>
[ Upstream commit fc1092f ] KMSAN reported uninit-value access in __ip_make_skb() [1]. __ip_make_skb() tests HDRINCL to know if the skb has icmphdr. However, HDRINCL can cause a race condition. If calling setsockopt(2) with IP_HDRINCL changes HDRINCL while __ip_make_skb() is running, the function will access icmphdr in the skb even if it is not included. This causes the issue reported by KMSAN. Check FLOWI_FLAG_KNOWN_NH on fl4->flowi4_flags instead of testing HDRINCL on the socket. Also, fl4->fl4_icmp_type and fl4->fl4_icmp_code are not initialized. These are union in struct flowi4 and are implicitly initialized by flowi4_init_output(), but we should not rely on specific union layout. Initialize these explicitly in raw_sendmsg(). [1] BUG: KMSAN: uninit-value in __ip_make_skb+0x2b74/0x2d20 net/ipv4/ip_output.c:1481 __ip_make_skb+0x2b74/0x2d20 net/ipv4/ip_output.c:1481 ip_finish_skb include/net/ip.h:243 [inline] ip_push_pending_frames+0x4c/0x5c0 net/ipv4/ip_output.c:1508 raw_sendmsg+0x2381/0x2690 net/ipv4/raw.c:654 inet_sendmsg+0x27b/0x2a0 net/ipv4/af_inet.c:851 sock_sendmsg_nosec net/socket.c:730 [inline] __sock_sendmsg+0x274/0x3c0 net/socket.c:745 __sys_sendto+0x62c/0x7b0 net/socket.c:2191 __do_sys_sendto net/socket.c:2203 [inline] __se_sys_sendto net/socket.c:2199 [inline] __x64_sys_sendto+0x130/0x200 net/socket.c:2199 do_syscall_64+0xd8/0x1f0 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x6d/0x75 Uninit was created at: slab_post_alloc_hook mm/slub.c:3804 [inline] slab_alloc_node mm/slub.c:3845 [inline] kmem_cache_alloc_node+0x5f6/0xc50 mm/slub.c:3888 kmalloc_reserve+0x13c/0x4a0 net/core/skbuff.c:577 __alloc_skb+0x35a/0x7c0 net/core/skbuff.c:668 alloc_skb include/linux/skbuff.h:1318 [inline] __ip_append_data+0x49ab/0x68c0 net/ipv4/ip_output.c:1128 ip_append_data+0x1e7/0x260 net/ipv4/ip_output.c:1365 raw_sendmsg+0x22b1/0x2690 net/ipv4/raw.c:648 inet_sendmsg+0x27b/0x2a0 net/ipv4/af_inet.c:851 sock_sendmsg_nosec net/socket.c:730 [inline] __sock_sendmsg+0x274/0x3c0 net/socket.c:745 __sys_sendto+0x62c/0x7b0 net/socket.c:2191 __do_sys_sendto net/socket.c:2203 [inline] __se_sys_sendto net/socket.c:2199 [inline] __x64_sys_sendto+0x130/0x200 net/socket.c:2199 do_syscall_64+0xd8/0x1f0 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x6d/0x75 CPU: 1 PID: 15709 Comm: syz-executor.7 Not tainted 6.8.0-11567-gb3603fcb79b1 deepin-community#25 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.3-1.fc39 04/01/2014 Fixes: 99e5aca ("ipv4: Fix potential uninit variable access bug in __ip_make_skb()") Reported-by: syzkaller <[email protected]> Signed-off-by: Shigeru Yoshida <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Paolo Abeni <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
[ Upstream commit dff0b01 ] The existing code always pulls the IPv6 header and sets the transport offset initially. Then optionally again pulls any extension headers in ipv6_gso_pull_exthdrs and sets the transport offset again on return from that call. skb->data is set at the start of the first extension header before calling ipv6_gso_pull_exthdrs, and must disable the frag0 optimization because that function uses pskb_may_pull/pskb_pull instead of skb_gro_ helpers. It sets the GRO offset to the TCP header with skb_gro_pull and sets the transport header. Then returns skb->data to its position before this block. This commit introduces a new helper function - ipv6_gro_pull_exthdrs - which is used in ipv6_gro_receive to pull ipv6 ext headers instead of ipv6_gso_pull_exthdrs. Thus, there is no modification of skb->data, all operations use skb_gro_* helpers, and the frag0 fast path can be taken for IPv6 packets with ext headers. Signed-off-by: Richard Gobert <[email protected]> Reviewed-by: Willem de Bruijn <[email protected]> Reviewed-by: David Ahern <[email protected]> Reviewed-by: Eric Dumazet <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]> Stable-dep-of: 5ef31ea ("net: gro: fix udp bad offset in socket lookup by adding {inner_}network_offset to napi_gro_cb") Signed-off-by: Sasha Levin <[email protected]>
…rk_offset to napi_gro_cb [ Upstream commit 5ef31ea ] Commits a602456 ("udp: Add GRO functions to UDP socket") and 57c67ff ("udp: additional GRO support") introduce incorrect usage of {ip,ipv6}_hdr in the complete phase of gro. The functions always return skb->network_header, which in the case of encapsulated packets at the gro complete phase, is always set to the innermost L3 of the packet. That means that calling {ip,ipv6}_hdr for skbs which completed the GRO receive phase (both in gro_list and *_gro_complete) when parsing an encapsulated packet's _outer_ L3/L4 may return an unexpected value. This incorrect usage leads to a bug in GRO's UDP socket lookup. udp{4,6}_lib_lookup_skb functions use ip_hdr/ipv6_hdr respectively. These *_hdr functions return network_header which will point to the innermost L3, resulting in the wrong offset being used in __udp{4,6}_lib_lookup with encapsulated packets. This patch adds network_offset and inner_network_offset to napi_gro_cb, and makes sure both are set correctly. To fix the issue, network_offsets union is used inside napi_gro_cb, in which both the outer and the inner network offsets are saved. Reproduction example: Endpoint configuration example (fou + local address bind) # ip fou add port 6666 ipproto 4 # ip link add name tun1 type ipip remote 2.2.2.1 local 2.2.2.2 encap fou encap-dport 5555 encap-sport 6666 mode ipip # ip link set tun1 up # ip a add 1.1.1.2/24 dev tun1 Netperf TCP_STREAM result on net-next before patch is applied: net-next main, GRO enabled: $ netperf -H 1.1.1.2 -t TCP_STREAM -l 5 Recv Send Send Socket Socket Message Elapsed Size Size Size Time Throughput bytes bytes bytes secs. 10^6bits/sec 131072 16384 16384 5.28 2.37 net-next main, GRO disabled: $ netperf -H 1.1.1.2 -t TCP_STREAM -l 5 Recv Send Send Socket Socket Message Elapsed Size Size Size Time Throughput bytes bytes bytes secs. 10^6bits/sec 131072 16384 16384 5.01 2745.06 patch applied, GRO enabled: $ netperf -H 1.1.1.2 -t TCP_STREAM -l 5 Recv Send Send Socket Socket Message Elapsed Size Size Size Time Throughput bytes bytes bytes secs. 10^6bits/sec 131072 16384 16384 5.01 2877.38 Fixes: a602456 ("udp: Add GRO functions to UDP socket") Signed-off-by: Richard Gobert <[email protected]> Reviewed-by: Eric Dumazet <[email protected]> Reviewed-by: Willem de Bruijn <[email protected]> Signed-off-by: Paolo Abeni <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
[ Upstream commit 5babae7 ] GRO-GSO path is supposed to be transparent and as such L3 flush checks are relevant to all UDP flows merging in GRO. This patch uses the same logic and code from tcp_gro_receive, terminating merge if flush is non zero. Fixes: e20cf8d ("udp: implement GRO for plain UDP sockets.") Signed-off-by: Richard Gobert <[email protected]> Reviewed-by: Willem de Bruijn <[email protected]> Signed-off-by: Paolo Abeni <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
[ Upstream commit 0d4ce24 ] During rework somehow msm8976 num_clk got removed, restore it. Fixes: d6edc31 ("clk: qcom: smd-rpm: Separate out interconnect bus clocks") Signed-off-by: Adam Skladowski <[email protected]> Reviewed-by: Konrad Dybcio <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Bjorn Andersson <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
commit 2e4edfa upstream. Add the missing sanity checks when parsing the firmware files before downloading them to avoid accessing and corrupting memory beyond the vmalloced buffer. Fixes: 83e8196 ("Bluetooth: btqca: Introduce generic QCA ROME support") Cc: [email protected] # 4.10 Signed-off-by: Johan Hovold <[email protected]> Signed-off-by: Luiz Augusto von Dentz <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
commit a112d3c upstream. The NVM configuration files used by WCN3988 and WCN3990/1/8 have two sets of configuration tags that are enclosed by a type-length header of type four which the current parser fails to account for. Instead the driver happily parses random data as if it were valid tags, something which can lead to the configuration data being corrupted if it ever encounters the words 0x0011 or 0x001b. As is clear from commit b638825 ("Bluetooth: btqca: Fix the NVM baudrate tag offcet for wcn3991") the intention has always been to process the configuration data also for WCN3991 and WCN3998 which encodes the baud rate at a different offset. Fix the parser so that it can handle the WCN3xxx configuration files, which has an enclosing type-length header of type four and two sets of TLV tags enclosed by a type-length header of type two and three, respectively. Note that only the first set, which contains the tags the driver is currently looking for, will be parsed for now. With the parser fixed, the software in-band sleep bit will now be set for WCN3991 and WCN3998 (as it is for later controllers) and the default baud rate 3200000 may be updated by the driver also for WCN3xxx controllers. Notably the deep-sleep feature bit is already set by default in all configuration files in linux-firmware. Fixes: 4219d46 ("Bluetooth: btqca: Add wcn3990 firmware download support.") Cc: [email protected] # 4.19 Cc: Matthias Kaehlcke <[email protected]> Signed-off-by: Johan Hovold <[email protected]> Signed-off-by: Luiz Augusto von Dentz <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
commit dd33664 upstream. The default device address apparently comes from the NVM configuration file and can differ quite a bit between controllers. Store the default address when parsing the configuration file and use it to determine whether the controller has been provisioned with an address. This makes sure that devices without a unique address start as unconfigured unless a valid address has been provided in the devicetree. Fixes: 32868e1 ("Bluetooth: qca: fix invalid device address check") Cc: [email protected] # 6.5 Cc: Doug Anderson <[email protected]> Cc: Janaki Ramaiah Thota <[email protected]> Signed-off-by: Johan Hovold <[email protected]> Tested-by: Douglas Anderson <[email protected]> Signed-off-by: Luiz Augusto von Dentz <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
commit 0adcf6b upstream. Add the missing sanity check when fetching the board id to avoid leaking slab data when later requesting the firmware. Fixes: a7f8ded ("Bluetooth: qca: add support for QCA2066") Cc: [email protected] # 6.7 Cc: Tim Jiang <[email protected]> Signed-off-by: Johan Hovold <[email protected]> Signed-off-by: Luiz Augusto von Dentz <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
commit cda0d6a upstream. Add the missing sanity checks and move the 255-byte build-id buffer off the stack to avoid leaking stack data through debugfs in case the build-info reply is malformed. Fixes: c0187b0 ("Bluetooth: btqca: Add support to read FW build version for WCN3991 BTSoC") Cc: [email protected] # 5.12 Signed-off-by: Johan Hovold <[email protected]> Signed-off-by: Luiz Augusto von Dentz <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
commit 40d442f upstream. A recent commit fixed the code that parses the firmware files before downloading them to the controller but introduced a memory leak in case the sanity checks ever fail. Make sure to free the firmware buffer before returning on errors. Fixes: f905ae0be4b7 ("Bluetooth: qca: add missing firmware sanity checks") Cc: [email protected] # 4.19 Signed-off-by: Johan Hovold <[email protected]> Signed-off-by: Luiz Augusto von Dentz <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
commit 95feb31 upstream. Due to an erratum with the SPR_DSA and SPR_IAX devices, it is not secure to assign these devices to virtual machines. Add the PCI IDs of these devices to the VFIO denylist to ensure that this is handled appropriately by the VFIO subsystem. The SPR_DSA and SPR_IAX devices are on-SOC devices for the Sapphire Rapids (and related) family of products that perform data movement and compression. Signed-off-by: Arjan van de Ven <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
…atum commit e11452e upstream. On Sapphire Rapids and related platforms, the DSA and IAA devices have an erratum that causes direct access (for example, by using the ENQCMD or MOVDIR64 instructions) from untrusted applications to be a security problem. To solve this, add a flag to the PCI device enumeration and device structures to indicate the presence/absence of this security exposure. In the mmap() method of the device, this flag is then used to enforce that the user has the CAP_SYS_RAWIO capability. In a future patch, a write() based method will be added that allows untrusted applications submit work to the accelerator, where the kernel can do sanity checking on the user input to ensure secure operation of the accelerator. Signed-off-by: Arjan van de Ven <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
commit 6827738 upstream. After the patch to restrict the use of mmap() to CAP_SYS_RAWIO for the currently existing devices, most applications can no longer make use of the accelerators as in production "you don't run things as root". To keep the DSA and IAA accelerators usable, hook up a write() method so that applications can still submit work. In the write method, sufficient input validation is performed to avoid the security issue that required the mmap CAP_SYS_RAWIO check. One complication is that the DSA device allows for indirect ("batched") descriptors. There is no reasonable way to do the input validation on these indirect descriptors so the write() method will not allow these to be submitted to the hardware on affected hardware, and the sysfs enumeration of support for the opcode is also removed. Early performance data shows that the performance delta for most common cases is within the noise. Signed-off-by: Nikhil Rao <[email protected]> Signed-off-by: Arjan van de Ven <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
commit 9da27fb upstream. The expiry time of a key is unconditionally overwritten during instantiation, defaulting to turn it permanent. This causes a problem for DNS resolution as the expiration set by user-space is overwritten to TIME64_MAX, disabling further DNS updates. Fix this by restoring the condition that key_set_expiry is only called when the pre-parser sets a specific expiry. Fixes: 39299bd ("keys, dns: Allow key types (eg. DNS) to be reclaimed immediately on expiry") Signed-off-by: Silvio Gissi <[email protected]> cc: David Howells <[email protected]> cc: Hazem Mohamed Abuelfotoh <[email protected]> cc: [email protected] cc: [email protected] cc: [email protected] cc: [email protected] cc: [email protected] Reviewed-by: Jarkko Sakkinen <[email protected]> Signed-off-by: Jarkko Sakkinen <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
commit 1db7959 upstream. [BUG] There is a recent report that when memory pressure is high (including cached pages), btrfs can spend most of its time on memory allocation in btrfs_alloc_page_array() for compressed read/write. [CAUSE] For btrfs_alloc_page_array() we always go alloc_pages_bulk_array(), and even if the bulk allocation failed (fell back to single page allocation) we still retry but with extra memalloc_retry_wait(). If the bulk alloc only returned one page a time, we would spend a lot of time on the retry wait. The behavior was introduced in commit 395cb57 ("btrfs: wait between incomplete batch memory allocations"). [FIX] Although the commit mentioned that other filesystems do the wait, it's not the case at least nowadays. All the mainlined filesystems only call memalloc_retry_wait() if they failed to allocate any page (not only for bulk allocation). If there is any progress, they won't call memalloc_retry_wait() at all. For example, xfs_buf_alloc_pages() would only call memalloc_retry_wait() if there is no allocation progress at all, and the call is not for metadata readahead. So I don't believe we should call memalloc_retry_wait() unconditionally for short allocation. Call memalloc_retry_wait() if it fails to allocate any page for tree block allocation (which goes with __GFP_NOFAIL and may not need the special handling anyway), and reduce the latency for btrfs_alloc_page_array(). Reported-by: Julian Taylor <[email protected]> Tested-by: Julian Taylor <[email protected]> Link: https://lore.kernel.org/all/[email protected]/ Fixes: 395cb57 ("btrfs: wait between incomplete batch memory allocations") CC: [email protected] # 6.1+ Reviewed-by: Sweet Tea Dorminy <[email protected]> Reviewed-by: Filipe Manana <[email protected]> Signed-off-by: Qu Wenruo <[email protected]> Reviewed-by: David Sterba <[email protected]> Signed-off-by: David Sterba <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
…io() commit 52ccdde upstream. When I did memory failure tests recently, below warning occurs: DEBUG_LOCKS_WARN_ON(1) WARNING: CPU: 8 PID: 1011 at kernel/locking/lockdep.c:232 __lock_acquire+0xccb/0x1ca0 Modules linked in: mce_inject hwpoison_inject CPU: 8 PID: 1011 Comm: bash Kdump: loaded Not tainted 6.9.0-rc3-next-20240410-00012-gdb69f219f4be deepin-community#3 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.14.0-0-g155821a1990b-prebuilt.qemu.org 04/01/2014 RIP: 0010:__lock_acquire+0xccb/0x1ca0 RSP: 0018:ffffa7a1c7fe3bd0 EFLAGS: 00000082 RAX: 0000000000000000 RBX: eb851eb853975fcf RCX: ffffa1ce5fc1c9c8 RDX: 00000000ffffffd8 RSI: 0000000000000027 RDI: ffffa1ce5fc1c9c0 RBP: ffffa1c6865d3280 R08: ffffffffb0f570a8 R09: 0000000000009ffb R10: 0000000000000286 R11: ffffffffb0f2ad50 R12: ffffa1c6865d3d10 R13: ffffa1c6865d3c70 R14: 0000000000000000 R15: 0000000000000004 FS: 00007ff9f32aa740(0000) GS:ffffa1ce5fc00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007ff9f3134ba0 CR3: 00000008484e4000 CR4: 00000000000006f0 Call Trace: <TASK> lock_acquire+0xbe/0x2d0 _raw_spin_lock_irqsave+0x3a/0x60 hugepage_subpool_put_pages.part.0+0xe/0xc0 free_huge_folio+0x253/0x3f0 dissolve_free_huge_page+0x147/0x210 __page_handle_poison+0x9/0x70 memory_failure+0x4e6/0x8c0 hard_offline_page_store+0x55/0xa0 kernfs_fop_write_iter+0x12c/0x1d0 vfs_write+0x380/0x540 ksys_write+0x64/0xe0 do_syscall_64+0xbc/0x1d0 entry_SYSCALL_64_after_hwframe+0x77/0x7f RIP: 0033:0x7ff9f3114887 RSP: 002b:00007ffecbacb458 EFLAGS: 00000246 ORIG_RAX: 0000000000000001 RAX: ffffffffffffffda RBX: 000000000000000c RCX: 00007ff9f3114887 RDX: 000000000000000c RSI: 0000564494164e10 RDI: 0000000000000001 RBP: 0000564494164e10 R08: 00007ff9f31d1460 R09: 000000007fffffff R10: 0000000000000000 R11: 0000000000000246 R12: 000000000000000c R13: 00007ff9f321b780 R14: 00007ff9f3217600 R15: 00007ff9f3216a00 </TASK> Kernel panic - not syncing: kernel: panic_on_warn set ... CPU: 8 PID: 1011 Comm: bash Kdump: loaded Not tainted 6.9.0-rc3-next-20240410-00012-gdb69f219f4be deepin-community#3 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.14.0-0-g155821a1990b-prebuilt.qemu.org 04/01/2014 Call Trace: <TASK> panic+0x326/0x350 check_panic_on_warn+0x4f/0x50 __warn+0x98/0x190 report_bug+0x18e/0x1a0 handle_bug+0x3d/0x70 exc_invalid_op+0x18/0x70 asm_exc_invalid_op+0x1a/0x20 RIP: 0010:__lock_acquire+0xccb/0x1ca0 RSP: 0018:ffffa7a1c7fe3bd0 EFLAGS: 00000082 RAX: 0000000000000000 RBX: eb851eb853975fcf RCX: ffffa1ce5fc1c9c8 RDX: 00000000ffffffd8 RSI: 0000000000000027 RDI: ffffa1ce5fc1c9c0 RBP: ffffa1c6865d3280 R08: ffffffffb0f570a8 R09: 0000000000009ffb R10: 0000000000000286 R11: ffffffffb0f2ad50 R12: ffffa1c6865d3d10 R13: ffffa1c6865d3c70 R14: 0000000000000000 R15: 0000000000000004 lock_acquire+0xbe/0x2d0 _raw_spin_lock_irqsave+0x3a/0x60 hugepage_subpool_put_pages.part.0+0xe/0xc0 free_huge_folio+0x253/0x3f0 dissolve_free_huge_page+0x147/0x210 __page_handle_poison+0x9/0x70 memory_failure+0x4e6/0x8c0 hard_offline_page_store+0x55/0xa0 kernfs_fop_write_iter+0x12c/0x1d0 vfs_write+0x380/0x540 ksys_write+0x64/0xe0 do_syscall_64+0xbc/0x1d0 entry_SYSCALL_64_after_hwframe+0x77/0x7f RIP: 0033:0x7ff9f3114887 RSP: 002b:00007ffecbacb458 EFLAGS: 00000246 ORIG_RAX: 0000000000000001 RAX: ffffffffffffffda RBX: 000000000000000c RCX: 00007ff9f3114887 RDX: 000000000000000c RSI: 0000564494164e10 RDI: 0000000000000001 RBP: 0000564494164e10 R08: 00007ff9f31d1460 R09: 000000007fffffff R10: 0000000000000000 R11: 0000000000000246 R12: 000000000000000c R13: 00007ff9f321b780 R14: 00007ff9f3217600 R15: 00007ff9f3216a00 </TASK> After git bisecting and digging into the code, I believe the root cause is that _deferred_list field of folio is unioned with _hugetlb_subpool field. In __update_and_free_hugetlb_folio(), folio->_deferred_list is initialized leading to corrupted folio->_hugetlb_subpool when folio is hugetlb. Later free_huge_folio() will use _hugetlb_subpool and above warning happens. But it is assumed hugetlb flag must have been cleared when calling folio_put() in update_and_free_hugetlb_folio(). This assumption is broken due to below race: CPU1 CPU2 dissolve_free_huge_page update_and_free_pages_bulk update_and_free_hugetlb_folio hugetlb_vmemmap_restore_folios folio_clear_hugetlb_vmemmap_optimized clear_flag = folio_test_hugetlb_vmemmap_optimized if (clear_flag) <-- False, it's already cleared. __folio_clear_hugetlb(folio) <-- Hugetlb is not cleared. folio_put free_huge_folio <-- free_the_page is expected. list_for_each_entry() __folio_clear_hugetlb <-- Too late. Fix this issue by checking whether folio is hugetlb directly instead of checking clear_flag to close the race window. Link: https://lkml.kernel.org/r/[email protected] Fixes: 32c8771 ("hugetlb: do not clear hugetlb dtor until allocating vmemmap") Signed-off-by: Miaohe Lin <[email protected]> Reviewed-by: Oscar Salvador <[email protected]> Cc: <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Miaohe Lin <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
This reverts commit 1ccc54d which is upstream commit adfeae2 This commit depends on bpf netkit series which isn't on linux-6.6.y branch yet. So it needs to be reverted. Otherwise, a build error "netlink_helpers.h: No such file or directory" occurs. Cc: [email protected] Signed-off-by: Pei Xiao <[email protected]> Reported-by: Geliang Tang <[email protected]> Tested-by: Geliang Tang <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
commit 6cf3506 upstream. If kobject_add() is fail in bind_rdev_to_array(), 'rdev->serial' will be alloc not be freed, and kmemleak occurs. unreferenced object 0xffff88815a350000 (size 49152): comm "mdadm", pid 789, jiffies 4294716910 hex dump (first 32 bytes): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace (crc f773277a): [<0000000058b0a453>] kmemleak_alloc+0x61/0xe0 [<00000000366adf14>] __kmalloc_large_node+0x15e/0x270 [<000000002e82961b>] __kmalloc_node.cold+0x11/0x7f [<00000000f206d60a>] kvmalloc_node+0x74/0x150 [<0000000034bf3363>] rdev_init_serial+0x67/0x170 [<0000000010e08fe9>] mddev_create_serial_pool+0x62/0x220 [<00000000c3837bf0>] bind_rdev_to_array+0x2af/0x630 [<0000000073c28560>] md_add_new_disk+0x400/0x9f0 [<00000000770e30ff>] md_ioctl+0x15bf/0x1c10 [<000000006cfab718>] blkdev_ioctl+0x191/0x3f0 [<0000000085086a11>] vfs_ioctl+0x22/0x60 [<0000000018b656fe>] __x64_sys_ioctl+0xba/0xe0 [<00000000e54e675e>] do_syscall_64+0x71/0x150 [<000000008b0ad622>] entry_SYSCALL_64_after_hwframe+0x6c/0x74 Fixes: 963c555 ("md: introduce mddev_create/destroy_wb_pool for the change of member device") Signed-off-by: Li Nan <[email protected]> Signed-off-by: Song Liu <[email protected]> Link: https://lore.kernel.org/r/[email protected] [ mddev_destroy_serial_pool third parameter was removed in mainline, where there is no need to suspend within this function anymore. ] Signed-off-by: Jeremy Bongio <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
Link: https://lore.kernel.org/r/[email protected] Tested-by: Takeshi Ogasawara <[email protected]> Tested-by: Miguel Ojeda <[email protected]> Tested-by: Harshit Mogalapalli <[email protected]> Tested-by: Allen Pais <[email protected]> Tested-by: Florian Fainelli <[email protected]> Tested-by: Shuah Khan <[email protected]> Tested-by: Conor Dooley <[email protected]> Link: https://lore.kernel.org/r/[email protected] Tested-by: Takeshi Ogasawara <[email protected]> Tested-by: Mark Brown <[email protected]> Tested-by: Florian Fainelli <[email protected]> Tested-by: Ron Economos <[email protected]> Tested-by: Allen Pais <[email protected]> Tested-by: Jon Hunter <[email protected]> Link: https://lore.kernel.org/r/[email protected] Tested-by: Mark Brown <[email protected]> Tested-by: Florian Fainelli <[email protected]> Tested-by: SeongJae Park <[email protected]> Tested-by: kernelci.org bot <[email protected]> Tested-by: Allen Pais <[email protected]> Tested-by: Takeshi Ogasawara <[email protected]> Tested-by: Jon Hunter <[email protected]> Tested-by: Linux Kernel Functional Testing <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
Avenger-285714
requested review from
xzl01,
opsiff,
Zeno-sole,
chenchongbiao,
matrix-wsk,
huangbibo,
deepin-ci-robot and
deepin-admin-bot
deepin pr auto reviewgit-svn-id: 950075842f52b447385c48b9a803235a8227f49@216054 91177308-0d34-0410-b5e6-96231b3b80d8 |
opsiff
approved these changes
May 20, 2024
|
[APPROVALNOTIFIER] This PR is NOT APPROVED This pull-request has been approved by: opsiff The full list of commands accepted by this bot can be found here.
Needs approval from an approver in each of these files:
Approvers can indicate their approval by writing |
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment
Add this suggestion to a batch that can be applied as a single commit.
This suggestion is invalid because no changes were made to the code.
Suggestions cannot be applied while the pull request is closed.
Suggestions cannot be applied while viewing a subset of changes.
Only one suggestion per line can be applied in a batch.
Add this suggestion to a batch that can be applied as a single commit.
Applying suggestions on deleted lines is not supported.
You must change the existing code in this line in order to create a valid suggestion.
Outdated suggestions cannot be applied.
This suggestion has been applied or marked resolved.
Suggestions cannot be applied from pending reviews.
Suggestions cannot be applied on multi-line comments.
Suggestions cannot be applied while the pull request is queued to merge.
Suggestion cannot be applied right now. Please check back later.
Update kernel base to 6.6.31