Input: Add a new serio driver for Phytium PCI PS/2 controller

This driver supports Phytium PCI PS/2 controller.

Signed-off-by: Cheng Quan <[email protected]>
Signed-off-by: Chen Baozi <[email protected]>
Signed-off-by: Chen Zhenhua <[email protected]>
Signed-off-by: Wang Yinfeng <[email protected]>
Signed-off-by: Hu Yeqing <[email protected]>

drivers/input/serio/Kconfig

@@ -40,6 +40,18 @@ config SERIO_I8042
 	  To compile this driver as a module, choose M here: the
 	  module will be called i8042.
 
+config SERIO_PHYTIUM_PS2
+	depends on SERIO
+	tristate "Phytium PS/2 (keyboard and mouse)"
+	default y if ARCH_PHYTIUM
+	depends on PCI
+	help
+	  This selects support for the PS/2 Host Controller on
+	  Phytium SoCs.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called phytium-ps2.
+
 config SERIO_SERPORT
 	tristate "Serial port line discipline"
 	default y

drivers/input/serio/Makefile

@@ -7,6 +7,7 @@
 
 obj-$(CONFIG_SERIO)		+= serio.o
 obj-$(CONFIG_SERIO_I8042)	+= i8042.o
+obj-$(CONFIG_SERIO_PHYTIUM_PS2)	+= phytium-ps2.o
 obj-$(CONFIG_SERIO_PARKBD)	+= parkbd.o
 obj-$(CONFIG_SERIO_SERPORT)	+= serport.o
 obj-$(CONFIG_SERIO_CT82C710)	+= ct82c710.o

drivers/input/serio/phytium-ps2.c

@@ -0,0 +1,186 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Phytium PS/2 keyboard controller driver.
+ *
+ * Copyright (C) 2021-2023, Phytium Technology Co., Ltd.
+ */
+
+#include <linux/module.h>
+#include <linux/interrupt.h>
+#include <linux/ioport.h>
+#include <linux/input.h>
+#include <linux/pci.h>
+#include <linux/slab.h>
+#include <linux/serio.h>
+#include <linux/delay.h>
+
+#define DRV_NAME	"phytium_ps2_pci"
+
+#define REG_STAT		0x0
+#define REG_STAT_TX_TIMEOUT	0x1
+#define REG_STAT_RX_TIMEOUT	0x2
+#define REG_STAT_TX_FULL	0x4
+#define REG_CTRL		0x4
+#define REG_CTRL_RESET		0x1
+#define REG_CTRL_TX_TIMEOUT	0x2
+#define REG_CTRL_RX_TIMEOUT	0x4
+#define REG_CTRL_RX_INTR	0x8
+#define REG_INTR		0x8
+#define REG_INTR_TIMEOUT	0x1
+#define REG_INTR_RX		0x2
+#define REG_TX			0xc
+#define REG_RX			0x10
+#define REG_TIMER_VAL		0x14
+
+#define REG_CTRL_ENABLE		(REG_CTRL_TX_TIMEOUT|REG_CTRL_RX_TIMEOUT|REG_CTRL_RX_INTR)
+#define REG_DATA_PARITY		0x100
+
+#define STAT_RX_COUNTER(stat)	((stat >> 8) & 0x1f)
+
+struct phytium_ps2_data {
+	void __iomem *base;
+	struct serio *io;
+	struct pci_dev *dev;
+};
+
+static irqreturn_t phytium_ps2_irq(int irq, void *devid)
+{
+	struct phytium_ps2_data *ps2if = devid;
+	u32 status, scancode, val = 0;
+	unsigned int flag;
+	int i, rxcount;
+
+	status = readl(ps2if->base + REG_STAT);
+	if (!status)
+		return IRQ_NONE;
+
+	/* Check if there is timeout interrupt */
+	if (status & (REG_STAT_RX_TIMEOUT|REG_STAT_TX_TIMEOUT))
+		val |= REG_INTR_TIMEOUT;
+
+	rxcount = STAT_RX_COUNTER(status);
+	for (i = 0; i < rxcount; i++) {
+		scancode = readl(ps2if->base + REG_RX) & 0x1ff;
+
+		if  (rxcount <= 16 && scancode != 0x1ff) {
+			flag = ((scancode & REG_DATA_PARITY) ? SERIO_PARITY : 0);
+			serio_interrupt(ps2if->io, scancode & 0xff, flag);
+		}
+	}
+
+	val |= REG_INTR_RX;
+	writel(val, ps2if->base + REG_INTR);
+
+	return IRQ_HANDLED;
+}
+
+int phytium_ps2_write(struct serio *serio, unsigned char val)
+{
+	struct phytium_ps2_data *ps2if = serio->port_data;
+	unsigned int stat;
+
+	do {
+		stat = readl(ps2if->base + REG_STAT);
+		cpu_relax();
+	} while (stat & REG_STAT_TX_FULL);
+
+	writel(val, ps2if->base + REG_TX);
+
+	return 0;
+}
+
+int phytium_ps2_open(struct serio *io)
+{
+	struct phytium_ps2_data *ps2if = io->port_data;
+
+	writel(REG_CTRL_RESET, ps2if->base + REG_CTRL);
+	/* Wait 4ms for the controller to be reset */
+	usleep_range(4000, 6000);
+	writel(REG_CTRL_ENABLE, ps2if->base + REG_CTRL);
+
+	return 0;
+}
+
+void phytium_ps2_close(struct serio *io)
+{
+	struct phytium_ps2_data *ps2if = io->port_data;
+
+	writel(0, ps2if->base + REG_CTRL);
+}
+
+static int phytium_pci_ps2_probe(struct pci_dev *pdev, const struct pci_device_id *id)
+{
+	struct phytium_ps2_data *ps2if;
+	struct serio *serio;
+	int ret;
+
+	ret = pcim_enable_device(pdev);
+	if (ret)
+		goto out;
+
+	ret = pcim_iomap_regions(pdev, 0x1, DRV_NAME);
+	if (ret)
+		goto out;
+
+	ps2if = devm_kzalloc(&pdev->dev, sizeof(struct phytium_ps2_data), GFP_KERNEL);
+	serio = kzalloc(sizeof(struct serio), GFP_KERNEL);
+	if (!ps2if || !serio) {
+		ret = -ENOMEM;
+		goto free;
+	}
+
+	serio->id.type = SERIO_8042;
+	serio->write = phytium_ps2_write;
+	serio->open = phytium_ps2_open;
+	serio->close = phytium_ps2_close;
+	strscpy(serio->name, pci_name(pdev), sizeof(serio->name));
+	strscpy(serio->phys, dev_name(&pdev->dev), sizeof(serio->phys));
+	serio->port_data = ps2if;
+	serio->dev.parent = &pdev->dev;
+	ps2if->io = serio;
+	ps2if->dev = pdev;
+	ps2if->base = pcim_iomap_table(pdev)[0];
+
+	ret = devm_request_irq(&pdev->dev, pdev->irq, phytium_ps2_irq,
+			       IRQF_SHARED, DRV_NAME, ps2if);
+	if (ret) {
+		dev_err(&pdev->dev, "could not request IRQ %d\n", pdev->irq);
+		goto free;
+	}
+
+	pci_set_drvdata(pdev, ps2if);
+	serio_register_port(ps2if->io);
+
+	return 0;
+
+free:
+	kfree(serio);
+out:
+	return ret;
+}
+
+static void phytium_pci_ps2_remove(struct pci_dev *pdev)
+{
+	struct phytium_ps2_data *ps2if = pci_get_drvdata(pdev);
+
+	serio_unregister_port(ps2if->io);
+	pcim_iounmap_regions(pdev, 0x1);
+}
+
+static const struct pci_device_id phytium_pci_ps2_ids[] = {
+	{ PCI_VDEVICE(PHYTIUM, 0xdc34) },
+	{},
+};
+MODULE_DEVICE_TABLE(pci, phytium_pci_ps2_ids);
+
+static struct pci_driver phytium_pci_ps2_driver = {
+	.name			= DRV_NAME,
+	.id_table		= phytium_pci_ps2_ids,
+	.probe			= phytium_pci_ps2_probe,
+	.remove			= phytium_pci_ps2_remove,
+};
+module_pci_driver(phytium_pci_ps2_driver);
+
+MODULE_AUTHOR("Cheng Quan <[email protected]>");
+MODULE_DESCRIPTION("Phytium PCI PS/2 controller driver");
+MODULE_LICENSE("GPL");