warning: unused `std::result::Result` that must be used
  --> grovedb/src/replication.rs:86:13
   |
86 | /             writeln!(
87 | |                 f,
88 | |                 " prefix:{:?} -> path:{:?}",
89 | |                 hex::encode(prefix),
90 | |                 metadata_path_str
91 | |             );
   | |_____________^
   |
   = note: this `Result` may be an `Err` variant, which should be handled
   = note: `#[warn(unused_must_use)]` on by default
   = note: this warning originates in the macro `writeln` (in Nightly builds, run with -Z macro-backtrace for more info)

warning: very complex type used. Consider factoring parts into `type` definitions
   --> grovedb/src/lib.rs:958:10
    |
958 |     ) -> Result<HashMap<Vec<Vec<u8>>, (CryptoHash, CryptoHash, CryptoHash)>, Error> {
    |          ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
    |
    = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#type_complexity

warning: very complex type used. Consider factoring parts into `type` definitions
   --> grovedb/src/lib.rs:888:10
    |
888 |     ) -> Result<HashMap<Vec<Vec<u8>>, (CryptoHash, CryptoHash, CryptoHash)>, Error> {
    |          ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
    |
    = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#type_complexity

warning: very complex type used. Consider factoring parts into `type` definitions
   --> grovedb/src/lib.rs:862:10
    |
862 |     ) -> Result<HashMap<Vec<Vec<u8>>, (CryptoHash, CryptoHash, CryptoHash)>, Error> {
    |          ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
    |
    = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#type_complexity
    = note: `#[warn(clippy::type_complexity)]` on by default

warning: use of `or_insert_with` to construct default value
   --> grovedb/src/query_result_type.rs:335:37
    |
335 |                     map.entry(last).or_insert_with(Vec::new).push(element);
    |                                     ^^^^^^^^^^^^^^^^^^^^^^^^ help: try: `or_default()`
    |
    = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#unwrap_or_default

warning: use of `or_insert_with` to construct default value
   --> grovedb/src/query_result_type.rs:285:37
    |
285 |                     map.entry(last).or_insert_with(Vec::new).push(key);
    |                                     ^^^^^^^^^^^^^^^^^^^^^^^^ help: try: `or_default()`
    |
    = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#unwrap_or_default
    = note: `#[warn(clippy::unwrap_or_default)]` on by default

warning: called `map(f)` on an `Option` value where `f` is a closure that returns the unit type `()`
   --> grovedb/src/operations/proof/verify.rs:326:25
    |
326 |                         limit_left.as_mut().map(|limit| *limit -= 1);
    |                         ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^-
    |                         |
    |                         help: try: `if let Some(limit) = limit_left.as_mut() { ... }`
    |
    = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#option_map_unit_fn

warning: called `map(f)` on an `Option` value where `f` is a closure that returns the unit type `()`
   --> grovedb/src/operations/proof/verify.rs:253:17
    |
253 |                 limit_left.as_mut().map(|limit| *limit -= 1);
    |                 ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^-
    |                 |
    |                 help: try: `if let Some(limit) = limit_left.as_mut() { ... }`
    |
    = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#option_map_unit_fn
    = note: `#[warn(clippy::option_map_unit_fn)]` on by default

warning: this `.into_iter()` call is equivalent to `.iter()` and will not consume the `slice`
   --> grovedb/src/operations/proof/util.rs:308:10
    |
308 |     path.into_iter()
    |          ^^^^^^^^^ help: call directly: `iter`
    |
    = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#into_iter_on_ref
    = note: `#[warn(clippy::into_iter_on_ref)]` on by default

warning: this function has too many arguments (11/7)
   --> grovedb/src/element/query.rs:692:5
    |
692 | /     fn query_item(
693 | |         storage: &RocksDbStorage,
694 | |         item: &QueryItem,
695 | |         results: &mut Vec<QueryResultElement>,
...   |
703 | |         add_element_function: fn(PathQueryPushArgs) -> CostResult<(), Error>,
704 | |     ) -> CostResult<(), Error> {
    | |______________________________^
    |
    = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#too_many_arguments
    = note: `#[warn(clippy::too_many_arguments)]` on by default

warning: this `let...else` may be rewritten with the `?` operator
   --> grovedb/src/element/helpers.rs:375:9
    |
375 | /         let Some(value_cost) = self.get_specialized_cost().ok() else {
376 | |             return None;
377 | |         };
    | |__________^ help: replace it with: `let value_cost = self.get_specialized_cost().ok()?;`
    |
    = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#question_mark
    = note: `#[warn(clippy::question_mark)]` on by default

warning: writing `&Vec` instead of `&[_]` involves a new object where a slice will do
   --> grovedb/src/element/helpers.rs:304:14
    |
304 |         key: &Vec<u8>,
    |              ^^^^^^^^ help: change this to: `&[u8]`
    |
    = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#ptr_arg
    = note: `#[warn(clippy::ptr_arg)]` on by default

warning: the borrowed expression implements the required traits
  --> grovedb/src/debugger.rs:30:34
   |
30 |         fs::write(&grovedbg_zip, &GROVEDBG_ZIP).expect("cannot crate grovedbg.zip");
   |                                  ^^^^^^^^^^^^^ help: change this to: `GROVEDBG_ZIP`
   |
   = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#needless_borrows_for_generic_args
   = note: `#[warn(clippy::needless_borrows_for_generic_args)]` on by default

warning: usage of `contains_key` followed by `insert` on a `HashMap`
   --> grovedb/src/batch/estimated_costs/average_case_costs.rs:277:13
    |
277 | /             if !self.cached_merks.contains_key(&base_path) {
278 | |                 GroveDb::add_average_case_get_merk_at_path::<RocksDbStorage>(
279 | |                     &mut cost,
280 | |                     &base_path,
...   |
287 | |                     .insert(base_path, estimated_layer_info.is_sum_tree);
288 | |             }
    | |_____________^
    |
    = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#map_entry
    = note: `#[warn(clippy::map_entry)]` on by default
help: try
    |
277 ~             self.cached_merks.entry(base_path).or_insert_with(|| {
278 +                 GroveDb::add_average_case_get_merk_at_path::<RocksDbStorage>(
279 +                     &mut cost,
280 +                     &base_path,
281 +                     estimated_layer_info
282 +                         .estimated_layer_count
283 +                         .estimated_to_be_empty(),
284 +                     estimated_layer_info.is_sum_tree,
285 +                 );
286 +                 estimated_layer_info.is_sum_tree
287 +             });
    |

warning: unnecessary use of `get(path).is_none()`
   --> grovedb/src/batch/estimated_costs/average_case_costs.rs:231:30
    |
231 |         if self.cached_merks.get(path).is_none() {
    |            ------------------^^^^^^^^^^^^^^^^^^^
    |            |
    |            help: replace it with: `!self.cached_merks.contains_key(path)`
    |
    = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#unnecessary_get_then_check
    = note: `#[warn(clippy::unnecessary_get_then_check)]` on by default

warning: variants `Execute`, `AverageCase`, and `WorstCase` are never constructed
  --> grovedb/src/batch/mode.rs:46:5
   |
45 | pub enum BatchRunMode {
   |          ------------ variants in this enum
46 |     Execute,
   |     ^^^^^^^
47 |     #[cfg(feature = "estimated_costs")]
48 |     AverageCase(HashMap<KeyInfoPath, EstimatedLayerInformation>),
   |     ^^^^^^^^^^^
49 |     #[cfg(feature = "estimated_costs")]
50 |     WorstCase(HashMap<KeyInfoPath, WorstCaseLayerInformation>),
   |     ^^^^^^^^^
   |
   = note: `BatchRunMode` has a derived impl for the trait `Clone`, but this is intentionally ignored during dead code analysis

warning: method `get_batch_run_mode` is never used
   --> grovedb/src/batch/mod.rs:686:8
    |
683 | trait TreeCache<G, SR> {
    |       --------- method in this trait
...
686 |     fn get_batch_run_mode(&self) -> BatchRunMode;
    |        ^^^^^^^^^^^^^^^^^^
    |
    = note: `#[warn(dead_code)]` on by default

warning: unused import: `net::Ipv4Addr`
 --> grovedb/src/debugger.rs:3:15
  |
3 | use std::{fs, net::Ipv4Addr, sync::Weak};
  |               ^^^^^^^^^^^^^
  |
  = note: `#[warn(unused_imports)]` on by default

warning: duplicated attribute
  --> merk/src/estimated_costs/average_case_costs.rs:77:7
   |
77 | #[cfg(feature = "full")]
   |       ^^^^^^^^^^^^^^^^
   |
note: first defined here
  --> merk/src/estimated_costs/average_case_costs.rs:76:7
   |
76 | #[cfg(feature = "full")]
   |       ^^^^^^^^^^^^^^^^
help: remove this attribute
  --> merk/src/estimated_costs/average_case_costs.rs:77:7
   |
77 | #[cfg(feature = "full")]
   |       ^^^^^^^^^^^^^^^^
   = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#duplicated_attributes
   = note: `#[warn(clippy::duplicated_attributes)]` on by default

warning: this function has too many arguments (8/7)
   --> merk/src/tree/mod.rs:783:5
    |
783 | /     pub fn put_value_with_reference_value_hash_and_value_cost(
784 | |         mut self,
785 | |         value: Vec<u8>,
786 | |         value_hash: CryptoHash,
...   |
805 | |         >,
806 | |     ) -> CostResult<Self, Error> {
    | |________________________________^
    |
    = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#too_many_arguments

warning: this function has too many arguments (8/7)
   --> merk/src/tree/walk/mod.rs:316:5
    |
316 | /     pub fn put_value_with_reference_value_hash_and_value_cost(
317 | |         mut self,
318 | |         value: Vec<u8>,
319 | |         value_hash: CryptoHash,
...   |
338 | |         >,
339 | |     ) -> CostResult<Self, Error> {
    | |________________________________^
    |
    = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#too_many_arguments

warning: this function has too many arguments (9/7)
   --> merk/src/tree/ops.rs:690:5
    |
690 | /     fn recurse<K: AsRef<[u8]>, C, V, U, R>(
691 | |         self,
692 | |         batch: &MerkBatch<K>,
693 | |         mid: usize,
...   |
699 | |         section_removal_bytes: &mut R,
700 | |     ) -> CostResult<(Option<Self>, KeyUpdates), Error>
    | |______________________________________________________^
    |
    = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#too_many_arguments

warning: assigning the result of `Clone::clone()` may be inefficient
   --> merk/src/proofs/query/merge.rs:385:17
    |
385 | /                 self.default_subquery_branch.subquery =
386 | |                     other_default_subquery_branch.subquery.clone();
    | |__________________________________________________________________^ help: use `clone_from()`: `self.default_subquery_branch.subquery.clone_from(&other_default_subquery_branch.subquery)`
    |
    = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#assigning_clones

warning: assigning the result of `Clone::clone()` may be inefficient
   --> merk/src/proofs/query/merge.rs:336:25
    |
336 | /                         self.default_subquery_branch.subquery =
337 | |                             other_default_subquery_branch.subquery.clone();
    | |__________________________________________________________________________^ help: use `clone_from()`: `self.default_subquery_branch.subquery.clone_from(&other_default_subquery_branch.subquery)`
    |
    = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#assigning_clones

warning: assigning the result of `Clone::clone()` may be inefficient
   --> merk/src/proofs/query/merge.rs:253:13
    |
253 |             self.default_subquery_branch.subquery = other_default_branch_subquery.clone();
    |             ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ help: use `clone_from()`: `self.default_subquery_branch.subquery.clone_from(&other_default_branch_subquery)`
    |
    = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#assigning_clones
    = note: `#[warn(clippy::assigning_clones)]` on by default