Skip to content

dasc-lab/ros2-vicon-bridge

Folders and files

NameName
Last commit message
Last commit date

Latest commit

 

History

23 Commits
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

Repository files navigation

ROS2 Vicon Bridge

Provides a simple ros2 vicon bridge, heavily inspired by https://github.com/ethz-asl/vicon_bridge

The Vicon SDK 1.12 source files are provided here so they can be compiled from source.

Only Linux is supported.

We provide two types of nodes. One uses the standard ViconSDK::Client (i.e., the ROS node publishes each frame that is received from the ViconSDK) or the ViconSDK::RetimingClient (i.e., it interpolates the vicon messages and publishes them at a fixed rate).

In our experience, the Client version is likely the better choice for most robotics applications, since it doesnt extrapolate data.

Installation

Install ros2 and ensure the following Boost libraries are available.

sudo apt-get install libboost-thread-dev libboost-date-time-dev

The source code of the ViconSDK has been copied from Vicon and provided in this repo, meaning it should be able to build for both x86 and aarch64 systems, and possibly others.

You also need to grab the diagnostic-updater package:

sudo apt-get install ros-${ROS_DISTRO}-diagnostic-updater

From your colcon_ws run

colcon build --symlink-install

Usage of the standard client (recommended)

Edit ./launch/all_segments.launch.py and set the IP address of the Vicon computer correctly. Then launch it through

ros2 launch vicon_bridge all_segments.launch.py

Alternatively, you can also run just the node:

ros2 run vicon_bridge vicon_bridge --ros-args ...

and in the /tf topic you will see the transform being published. Each tf that is published is in the form of <tf_namespace>/<subject_name>/<segment_name> where subject and segment names are usually the same. By default tf_namespace=vicon.

It will also publish a topic /<tf_namespace>/<subject_name>/<segment_name> for each segment in the vicon datastream. This topic is a geometry_msgs::msg::TransformStamped message, and the header.stamp is the timestamp corrected for latency, as reported by VICON.

You need to set a bunch of parameters:

Parameters

  • [string] host_name: in the format of <ip_address_of_computer_running_vicon_tracker>:801
  • [string] stream_mode: either ClientPull or ServerPush (ServerPush requires more networking bandwidth, but has lower latency)
  • [double] update_rate_hz: the rate at which you want to poll for new messages (ideally more than 2x the frequency of the incoming vicon messages)
  • [bool] publish_specific_segment: if true it will only publish the tf for a specific agent. Helps reduce the number of messages published. if false, it will publish a tf message for each segment.
  • [string] target_subject_name: if publish_specific_segment is true, this is the subject that will be published
  • [string] target_segment_name: if publish_specific_segment is true, this is the subject that will be published
  • [string] world_frame_id: this is the frame_id associated with the origin of your Vicon setup.
  • [string] tf_namespace: sets the namespace for all published names to tf.

Example:

ros2 run vicon_bridge vicon_bridge --ros-args -p host_name:="192.168.2.136:801"

It also prints to the console the number of times it missed an update, and failed to publish a message. Every second, it also publishes the latency of the last message.

Usage of the retiming client

ros2 run vicon_bridge vicon_bridge_retiming --ros-args ...

and in the /tf topic you will see the transform being published. Each tf that is published is in the form of <tf_namespace>/<subject_name>/<segment_name> where subject and segment names are usually the same. By default tf_namespace=vicon.

You need to set a bunch of parameters:

Parameters

  • [string] host_name: in the format of <ip_address_of_computer_running_vicon_tracker>:801
  • [double] max_prediction_ms: in the RetimingClient it is allowed to predict the state of the target, by upto max_prediction_ms milliseconds
  • [double] update_rate_hz: the rate at which you want to publish the state estimate
  • [bool] publish_specific_segment: if true it will only publish the tf for a specific agent. Helps reduce the number of messages published. if false, it will publish a tf message for each segment.
  • [string] target_subject_name: if publish_specific_segment is true, this is the subject that will be published
  • [string] target_segment_name: if publish_specific_segment is true, this is the subject that will be published
  • [string] world_frame_id: this is the frame_id associated with the origin of your Vicon setup.
  • [string] tf_namespace: sets the namespace for all published names to tf.

Example:

ros2 run vicon_bridge vicon_bridge_retiming --ros-args -p host_name:="192.168.2.136:801" -p max_prediction_ms:=25 -p --update_rate_hz:=100.0

It also prints to the console the number of times it missed an update, and failed to publish a message.

About

No description, website, or topics provided.

Resources

Stars

Watchers

Forks

Releases

No releases published

Packages

No packages published