Primary fork has moved to freewil/express-form
Express Form provides data filtering and validation as route middleware to your Express applications.
var form = require("express-form"),
field = form.field;
var app = express.createServer();
app.configure(function() {
app.use(express.bodyDecoder());
app.use(app.router);
});
app.post(
// Route
'/user',
// Form filter and validation middleware
form(
field("username").trim().required().is(/^[a-z]+$/),
field("password").trim().required().is(/^[0-9]+$/),
field("email").trim().isEmail()
),
// Express request-handler now receives filtered and validated data
function(req, res){
if (!req.form.isValid) {
// Handle errors
console.log(req.form.errors);
} else {
// Or, use filtered form data from the form object:
console.log("Username:", req.form.username);
console.log("Password:", req.form.password);
console.log("Email:", req.form.email);
}
}
);
The Express Form module returns an Express Route Middleware function. You specify filtering and validation by passing filters and validators as arguments to the main module function. For example:
var form = require("express-form");
app.post('/user',
// Express Form Route Middleware: trims whitespace off of
// the `username` field.
form(form.field("username").trim()),
// standard Express handler
function(req, res) {
// ...
}
);
The field property of the module creates a filter/validator object tied to a specific field.
field(fieldname[, label]);
You can access nested properties with either dot or square-bracket notation.
field("post.content").minLength(50),
field("post[user][id]").isInt(),
field("post.super.nested.property").required()
Simply specifying a property like this, makes sure it exists. So, even if req.body.post was undefined, req.form.post.content would be defined. This helps avoid any unwanted errors in your code.
The API is chainable, so you can keep calling filter/validator methods one after the other:
filter("username").trim().toLower().truncate(5).required().isAlphanumeric()
Type Coercion
toFloat() -> Number
toInt() -> Number, rounded down
toBoolean() -> Boolean from truthy and falsy values
toBooleanStrict() -> Only true, "true", 1 and "1" are `true`
ifNull(replacement) -> "", undefined and null get replaced by `replacement`
HTML Encoding for & " < >
entityEncode() -> encodes HTML entities
entityDecode() -> decodes HTML entities
String Transformations
trim(chars) -> `chars` defaults to whitespace
ltrim(chars)
rtrim(chars)
toLower() / toLowerCase()
toUpper() / toUpperCase()
truncate(length) -> Chops value at (length - 3), appends `...`
Validation messages: each validator has its own default validation message. These can easily be overridden at runtime by passing a custom validation message to the validator. The custom message is always the last argument passed to the validator.
Use "%s" in the message to have the field name or label printed in the message:
validate("username").required()
// -> "username is required"
validate("username").required("What is your %s?")
// -> "What is your username?"
validate("username", "Username").required("What is your %s?")
// -> "What is your Username?"
Validation Methods
By Regular Expressions
regex(pattern[, modifiers[, message]])
- pattern (RegExp|String): RegExp (with flags) or String pattern.
- modifiers (String): Optional, and only if `pattern` is a String.
- message (String): Optional validation message.
alias: is
Checks that the value matches the given regular expression.
Example:
validate("username").is("[a-z]", "i", "Only letters are valid in %s")
validate("username").is(/[a-z]/i, "Only letters are valid in %s")
notRegex(pattern[, modifiers[, message]])
- pattern (RegExp|String): RegExp (with flags) or String pattern.
- modifiers (String): Optional, and only if `pattern` is a String.
- message (String): Optional validation message.
alias: not
Checks that the value does NOT match the given regular expression.
Example:
validate("username").not("[a-z]", "i", "Letters are not valid in %s")
validate("username").not(/[a-z]/i, "Letters are not valid in %s")
By Type
isNumeric([message])
isInt([message])
isDecimal([message])
isFloat([message])
By Format
isEmail([message])
isUrl([message])
isIP([message])
isAlpha([message])
isAlphanumeric([message])
isLowercase([message])
isUppercase([message])
By Content
notEmpty([message])
Checks if the value is not just whitespace.
equals( value [, message] )
- value (String): A value that should match the field value OR a fieldname
token to match another field, ie, `field::password`.
Compares the field to `value`.
Example:
validate("username").equals("admin")
validate("password").is(/^\w{6,20}$/)
validate("password_confirmation").equals("field::password")
contains(value[, message])
- value (String): The value to test for.
Checks if the field contains `value`.
notContains(string[, message])
- value (String): A value that should not exist in the field.
Checks if the field does NOT contain `value`.
Other
required([message])
Checks that the field is present in form data, and has a value.
array()
Using the array() flag means that field always gives an array. If the field value is an array, but there is no flag, then the first value in that array is used instead.
This means that you don't have to worry about unexpected post data that might break your code. Eg/ when you call an array method on what is actually a string.
field("project.users").array(),
// undefined => [], "" => [], "q" => ["q"], ["a", "b"] => ["a", "b"]
field("project.block"),
// project.block: ["a", "b"] => "a". No "array()", so only first value used.
In addition, any other methods called with the array method, are applied to every value within the array.
field("post.users").array().toUpper()
// post.users: ["one", "two", "three"] => ["ONE", "TWO", "THREE"]
custom(function[, message])
- function (Function): A custom filter or validation function.
This method can be utilised as either a filter or validator method.
If the function throws an error, then an error is added to the form. (If `message` is not provided, the thrown error message is used.)
If the function returns a value, then it is considered a filter method, with the field then becoming the returned value.
If the function returns undefined, then the method has no effect on the field.
Examples:
If the `name` field has a value of "hello there", this would
transform it to "hello-there".
field("name").custom(function(value) {
return value.replace(/\s+/g, "-");
});
Throws an error if `username` field does not have value "admin".
field("username").custom(function(value) {
if (value !== "admin") {
throw new Error("%s must be 'admin'.");
}
});
Express Form adds a form object with various properties to the request.
isValid -> Boolean
errors -> Array
flashErrors(name) -> undefined
Flashes all errors. Configurable, enabled by default.
getErrors(name) -> Array or Object if no name given
- fieldname (String): The name of the field
Gets all errors for the field with the given name.
You can also call this method with no parameters to get a map of errors for all of the fields.
Example request handler:
function(req, res) {
if (!req.form.isValid) {
console.log(req.errors);
console.log(req.getErrors("username"));
console.log(req.getErrors());
}
}
Express Form has various configuration options, but aims for sensible defaults for a typical Express application.
form.configure(options) -> self
- options (Object): An object with configuration options.
flashErrors (Boolean): If validation errors should be automatically passed to Express’ flash() method. Default: true.
autoLocals (Boolean): If field values from Express’ request.body should be passed into Express’ response.locals object. This is helpful when a form is invalid an you want to repopulate the form elements with their submitted values. Default: true.
Note: if a field name dash-separated, the name used for the locals object will be in camelCase.
dataSources (Array): An array of Express request properties to use as data sources when filtering and validating data. Default: ["body", "query", "params"].
autoTrim (Boolean): If true, all fields will be automatically trimmed. Default: false.
passThrough (Boolean): If true, all data sources will be merged with `req.form`. Default: false.
npm install express-form
Currently, Express Form uses many of the validation and filtering functions provided by Chris O'Hara's node-validator.