Adds smart power switcher highly configurable.
This input is responsible for the Smart Power Switcher settings.
This input is responsible for the data coming from the storages, tanks or circuit network.
If no signal is specified, the default settings are used, which can be changed in the mod settings.
Forced activation signal for Smart Power Switcher. Set on the settings input.
- If negative value - turns OFF.
- If positive value - turns ON.
Determines the delay of turning OFF Smart Power Switcher (in ticks). Set on the settings input.
Determines the delay of turning ON Smart Power Switcher (in ticks). Set on the settings input.
Missing amount of signal triggering a power on. Set on the settings input.
Settings:
- Iron Plate 40,000
- Threshold 30,000
If the iron is more than 40,000, then the plant will stop until the iron becomes 10,000 (40,000 - 30,000).
Settings:
- Green signal 150,000
- Threshold 50,000
- Red signal -1
If the green signal is more than 150,000, then the plant will stop until the green signal becomes 100,000 (150,000 - 50,000). If the input does not have at least 1 red signal, the plant will shut down.
Settings:
- Iron Ore -1
- Coal -1
- Iron plate 50,000
- Threshold 25,000
If the iron plate is more than 50,000, then the plant will stop until the iron plate becomes 25,000 (50,000 - 25,000). If the input does not have at least 1 coal, the plant will shut down. If the input does not have at least 1 iron ore, the plant will shut down.
Settings:
- Slag 100,000
- Hydrogen 150,000
- Oxygen 150,000
- Threshold 50,000
If the slag is more than 100,000, then the plant will stop until the slag becomes 50,000 (100,000 - 50,000). If the oxygen is more than 150,000, then the plant will stop until the oxygen becomes 100,000 (150,000 - 50,000). If the hydrogen is more than 150,000, then the plant will stop until the hydrogen becomes 100,000 (150,000 - 50,000).
Configuration error.
Smart Power Switch is connected.
Smart Power Switch is disconnected.
Smart Power Switch change connection state.