Enable the analysis of two towers. [BREAKING]

README.md

@@ -6,7 +6,7 @@ BYD HVS Battery poll data
 
 ## Introduction
 
-This Adapter takes data from a byd PV battery ( https://www.bydbatterybox.com/ ) and puts them into datapoints in the adapter. Unfortunately there is no official API and no documentation, so I used wireshark and a byd-hvs-simulator to try to understand the communication. My adapter simulates the byd-app, sends similar packets to the device and analyses the responses. 
+This Adapter takes data from a byd PV battery ( https://www.bydbatterybox.com/ ) and puts them into datapoints in the adapter. Unfortunately there is no official API and no documentation, so I used wireshark and a byd-hvs-simulator to try to understand the communication. My adapter simulates the byd-app, sends similar packets to the device and analyses the responses.
 
 ## be careful
 
@@ -19,10 +19,10 @@ Up to 5 HVS Modules are now supported.
 ## settings
 
 Interval: That's easy: how often (s) shall the data be polled
-IP-Adress: Thats self explaining. Either you use the standard address ( 192.168.16.254 ) and change the routing at home, e.g.: https://www.photovoltaikforum.com/thread/150898-byd-hvs-firmware-update/?postID=2215343#post2215343 . The advantage is: The beConnect app works, too. Other possibility: You change the IP-Adress of the box. But: Be warned: the text on the webpage is confusing and if you are not absolutely shure about the things you do: PLEASE do not touch the settings. In the German forums I read from people who were locked out of their system and there is no way back, either byd sends you a replacement HVU or you have to buy a new one. 
+IP-Adress: Thats self explaining. Either you use the standard address ( 192.168.16.254 ) and change the routing at home, e.g.: https://www.photovoltaikforum.com/thread/150898-byd-hvs-firmware-update/?postID=2215343#post2215343 . The advantage is: The beConnect app works, too. Other possibility: You change the IP-Adress of the box. But: Be warned: the text on the webpage is confusing and if you are not absolutely shure about the things you do: PLEASE do not touch the settings. In the German forums I read from people who were locked out of their system and there is no way back, either byd sends you a replacement HVU or you have to buy a new one.
 Battery-details: As explained above: Do you need the details of the battery? If so: set the checkobx.
 Battery-details - every ... cycles :Also like above, should be clear
-Test Mode - show data in error log: If you check this box: the sent and recieved data are displayed in the error-log, so you can easily download the data and send it to me in case of errors. 
+Test Mode - show data in error log: If you check this box: the sent and recieved data are displayed in the error-log, so you can easily download the data and send it to me in case of errors.
 Copy and Paste does not work - the data is cut at the end. You will have to download it before you send it to me.
 
 [Link zur nativen deutschen Readme:](README-German.md)
@@ -32,8 +32,12 @@ Copy and Paste does not work - the data is cut at the end. You will have to down
 	Placeholder for the next version (at the beginning of the line):
 	### __WORK IN PROGRESS__
 -->
+### 1.5.1 (2024-01-15)
+* Enable the possibility to get informations from a two tower setup
+* BREAKING CHANGE of Structure.
+
 ### 1.5.0 (2023-11-04)
-* Breaking change: nodejs 16 minimum required  
+* Breaking change: nodejs 16 minimum required
 * automated checks and release-script repaired (thanks to mcm1957, he did the work)
 * nothing else changed in code
 

admin/index_m.html

@@ -97,13 +97,22 @@
 					<input type="checkbox" class="value" id="ConfTestMode" />
 					<label for="ConfTestMode" class="translate">Test Mode - show data in error log</label>
 				</div>
-			</div>            
+			</div>
             <div class="row">
 				<div class="col s6 input-field">
 					<input type="text" class="value" id="ConfDetailshowoften" />
 					<label for="ConfDetailshowoften" class="translate">Battery-details - every ... cycles</label>
 				</div>
 			</div>
+            <div class="row">
+				<div class="col s6 input-field">
+					<select name="ConfBydTowerCont" id="ConfBydTowerCount" class="value">
+                        <option>1</option>
+                        <option>2</option>
+                    </select>
+					<label for="ConfBydTowerCount" class="translate">ConfBydTowerCount</label>
+				</div>
+			</div>
         </div>
 
     </div>

admin/words.js

@@ -77,5 +77,18 @@ systemDictionary = {
         "es": "Modo de prueba: muestra datos en el registro de errores",
         "pl": "Tryb testowy - pokaż dane w dzienniku błędów",
         "zh-cn": "测试模式-在错误日志中显示数据"
-    }
+    },
+    "ConfBydTowerCount": {
+        "en": "Count of towers",
+        "de": "Anzahl der Türme",
+        "ru": "Количество башен",
+        "pt": "Contagem de torres",
+        "nl": "Aantal torens",
+        "fr": "Nombre de tours",
+        "it": "Conte di torri",
+        "es": "Conde de torres",
+        "pl": "Liczba wież",
+        "uk": "Кількість веж",
+        "zh-cn": "塔数"
+      }
 };

io-package.json

@@ -1,8 +1,11 @@
 {
   "common": {
     "name": "bydhvs",
-    "version": "1.5.0",
+    "version": "1.5.1",
     "news": {
+      "1.5.1": {
+        "en": "Working with parallel towers. you can setup it in admin page."
+      },
       "1.5.0": {
         "en": "Breaking change: nodejs 16 minimum required  \nautomated checks and release-script repaired (thanks to mcm1957, he did the work)\nnothing else changed in code",
         "de": "Breaking change: nodejs 16 minimum erforderlich\nautomatisierte kontrollen und release-script repariert (dank mcm1957, er tat die arbeit)\nnichts anders geändert in code",
@@ -136,6 +139,50 @@
     "compact": true,
     "connectionType": "local",
     "dataSource": "poll",
+    "messages": [
+      {
+        "condition": {
+          "operand": "and",
+          "rules": [
+            "oldVersion<1.5.1",
+            "newVersion>=1.5.1"
+          ]
+        },
+        "title": {
+          "en": "Changed structure of Diagnosis and CellDetails.",
+          "de": "Geänderte Struktur der Diagnose und CellDetails.",
+          "ru": "Изменение структуры диагностики и клеточных деталей.",
+          "pt": "Estrutura alterada de Diagnóstico e CellDetails.",
+          "nl": "Veranderde structuur van Diagnose en CellDetails.",
+          "fr": "Structure modifiée du diagnostic et des détails cellulaires.",
+          "it": "Struttura modificata di Diagnosi e CellDetails.",
+          "es": "Estructura modificada de Diagnóstico y Detalles Celulares.",
+          "pl": "Zmieniona struktura diagnostyki i cellDetails.",
+          "uk": "Змінена структура діагностики та клітинних деталей.",
+          "zh-cn": "已改变的诊断和细胞分类的结构."
+        },
+        "text": {
+          "en": "Changed structure of Diagnosis and CellDetails. We introduced an additional level for each tower. Example: Old Structure: bydhvs.0.Diagnosis.SOC; New Structure: bydhvs.0.Diagnosis.Tower_1.SOC; You should check your Database/Influx/... subscriptions.",
+          "de": "Geänderte Struktur der Diagnose und CellDetails. Wir haben für jeden Turm ein zusätzliches Niveau eingeführt. Beispiel: Alte Struktur: bydhvs.0.Diagnosis.SOC; Neue Struktur: bydhvs.0.Diagnosis.Tower_1.SOC; Sie sollten Ihre Datenbank/Influx/... Abonnements überprüfen.",
+          "ru": "Изменение структуры диагностики и клеточных деталей. Мы ввели дополнительный уровень для каждой башни. Пример: Старая структура: bydhvs.0.Diagnosis.SOC; Новая структура: bydhvs.0.Diagnosis.Tower_1.SOC; Вы должны проверить свою базу данных / Influx /... подписки.",
+          "pt": "Estrutura alterada de Diagnóstico e CellDetails. Introduzimos um nível adicional para cada torre. Exemplo: Old Structure: bydhvs.0.Diagnosis.SOC; New Structure: bydhvs.0.Diagnosis.Tower_1.SOC; Você deve verificar seu banco de dados / Influx /... assinaturas.",
+          "nl": "Veranderde structuur van Diagnose en CellDetails. We hebben een extra niveau voor elke toren ingevoerd. Voorbeeld: Oude structuur: bydhvs.0.Diagnose.SOC; Nieuwe structuur: bydhvs.0.Diagnose.Tower_1.SOC; Controleer uw Database/Influx/... abonnementen.",
+          "fr": "Structure modifiée du diagnostic et des détails cellulaires. Nous avons introduit un niveau supplémentaire pour chaque tour. Exemple: Ancienne structure: bydhvs.0.Diagnosis.SOC; Nouvelle structure: bydhvs.0.Diagnosis.Tower_1.SOC; Vous devriez vérifier vos abonnements Database/Influx/...",
+          "it": "Struttura modificata di Diagnosi e CellDetails. Abbiamo introdotto un livello aggiuntivo per ogni torre. Esempio: Struttura vecchia: bydhvs.0.Diagnosis.SOC; Nuova struttura: bydhvs.0.Diagnosis.Tower_1.SOC; Si consiglia di controllare il database/Influx/... abbonamenti.",
+          "es": "Estructura modificada de Diagnóstico y Detalles Celulares. Presentamos un nivel adicional para cada torre. Ejemplo: Old Structure: bydhvs.0.Diagnosis.SOC; New Structure: bydhvs.0.Diagnosis.Tower_1.SOC; Usted debe comprobar sus suscripciones de Base de Datos/Influjo/...",
+          "pl": "Zmieniona struktura diagnostyki i cellDetails. Wprowadziliśmy dodatkowy poziom dla każdej wieży. Przykład: Stara struktura: bydhvs.0.Diagnosis.SOC; Nowa struktura: bydhvs.0.Diagnosis.Tower _ 1.SOC; Powinieneś sprawdzić swoją bazę danych / Influm /... subskrypcje.",
+          "uk": "Змінена структура діагностики та клітинних деталей. Ми ввели додатковий рівень для кожної вежі. Приклад: Стара структура: bydhvs.0.Diagnosis.SOC; Нова структура: bydhvs.0.Diagnosis.Tower_1.SOC; Ви повинні перевірити вашу базу даних/Influx/... підписки.",
+          "zh-cn": "已改变的诊断和细胞分类的结构。 我们为每座塔增加了一层 例:旧结构:bydhvs.0.Diagnosis.SOC;新结构:bydhvs.0.Diagnosis.Tower_1.SOC; 您应该检查您的数据库/ Influx/... 订阅 ."
+        },
+        "link": "https://github.com/christianh17/ioBroker.bydhvs/pull/262",
+        "linkText": "Reiew SourceCode of that change or report an issue",
+        "level":"warn",
+        "buttons": [
+          "agree",
+          "cancel"
+        ]
+      }
+    ],
     "materialize": true,
     "dependencies": [
       {
@@ -147,6 +194,7 @@
     "ConfPollInterval": "60",
     "ConfIPAdress": "192.168.16.254",
     "ConfDetailshowoften": 60,
+    "ConfBydTowerCount": 1,
     "pingInterval": 15000
   },
   "objects": [],