Update BKMN-NERO.config (#1291)

* Update BKMN-NERO.config

The old BKMN NERO F7 Rev1 target contains many incorrect resources. 

I have tested all pins from the pins header back to the MCU and corrected the target accordingly.

I have added the missing resources for motors 5 to 8
I have corrected the GYRO_EXTI 1 pin.

And many more.
I have tested this target and it is fully working.

Please merge into master.

* Update configs/default/BKMN-NERO.config

Co-authored-by: Mark Haslinghuis <[email protected]>

---------

Co-authored-by: Mark Haslinghuis <[email protected]>

configs/default/BKMN-NERO.config

@@ -1,54 +1,68 @@
-# Betaflight / STM32F7X2 (S7X2) 4.0.0
+# Betaflight / STM32F7X2 (S7X2) 4.4.3 Mar 18 2024 / 20:58:20 (738127e7e) MSP API: 1.45
 
-# this will trigger the cloud build system to include these target defines.
-#define USE_ACC
-#define USE_ACC_SPI_MPU6500
 #define USE_GYRO
-#define USE_GYRO_SPI_MPU6500
+#define USE_GYRO_SPI_ICM20602
+#define USE_GYRO
+#define USE_GYRO_SPI_ICM20602
+#define USE_SDCARD
 
 board_name NERO
 manufacturer_id BKMN
 
-# Basic I/O
+# resources
+resource BEEPER 1 C01
+resource LED_STRIP 1 B00 # pin M5
 resource LED 1 B06
 resource LED 2 B05
 resource LED 3 B04
-resource beeper C1
+
+# Motors
+resource MOTOR 1 A00
+resource MOTOR 2 A01
+resource MOTOR 3 A02
+resource MOTOR 4 A03
+# resource MOTOR 5 B00
+resource MOTOR 6 B01
+resource MOTOR 7 C08
+resource MOTOR 8 C09
+
+# UARTS
+resource SERIAL_TX 1 A09
+resource SERIAL_RX 1 A10
+resource SERIAL_TX 3 B10
+resource SERIAL_RX 3 B11
+resource SERIAL_TX 6 C06
+resource SERIAL_RX 6 C07
+
+# I2C1
 resource I2C_SCL 1 B08
 resource I2C_SDA 1 B09
+
+# ADC
+resource ADC_BATT 1 C03
+resource ADC_CURR 1 C02 # --> pin AD
+resource ADC_RSSI 1 A04 # --> pin DA
+
+# GYRO & ACC --> SPI1
 resource SPI_SCK 1 A05
 resource SPI_MISO 1 A06
 resource SPI_MOSI 1 A07
+resource GYRO_CS 1 C04
+resource GYRO_EXTI 1 B02
+
+# ACC_SPI --> SPI2 (CS pin B12)
 resource SPI_SCK 2 B13
 resource SPI_MISO 2 B14
 resource SPI_MOSI 2 B15
+
+# SDCARD --> SPI3
 resource SPI_SCK 3 C10
 resource SPI_MISO 3 C11
 resource SPI_MOSI 3 C12
-resource gyro_cs 1 C4
-resource GYRO_EXTI 1 B15
-resource SDCARD_CS 1 A15
-resource SDCARD_DETECT 1 D02
-resource MOTOR 1 A0
-resource MOTOR 2 A1
-resource MOTOR 3 A2
-resource MOTOR 4 A3
-resource LED_STRIP B0
-resource PPM C7
-resource SERIAL_TX 1 A9
-resource SERIAL_RX 1 A10
-resource SERIAL_TX 3 B10
-resource SERIAL_RX 3 B11
-resource SERIAL_TX 6 C6
-resource SERIAL_RX 6 C7
-resource ADC_BATT 1 C03
-resource ESCSERIAL 1 C07
 resource SDCARD_CS 1 A15
 resource SDCARD_DETECT 1 D02
 
-# Timers
-# First four timers
-# timer is zero origin
+# timer
 timer A00 AF2
 # pin A00: TIM5 CH1 (AF2)
 timer A01 AF2
@@ -61,8 +75,6 @@ timer B00 AF2
 # pin B00: TIM3 CH3 (AF2)
 timer B01 AF2
 # pin B01: TIM3 CH4 (AF2)
-timer C07 AF3
-# pin C07: TIM8 CH2 (AF3)
 timer C08 AF3
 # pin C08: TIM8 CH3 (AF3)
 timer C09 AF3
@@ -71,39 +83,35 @@ timer C09 AF3
 # dma
 dma ADC 1 1
 # ADC 1: DMA2 Stream 4 Channel 0
-dma pin B04 0
-# pin B04: DMA1 Stream 4 Channel 5
-dma pin B05 0
-# pin B05: DMA1 Stream 5 Channel 5
+dma pin A00 0
+# pin A00: DMA1 Stream 2 Channel 6
+dma pin A01 0
+# pin A01: DMA1 Stream 4 Channel 6
+dma pin A02 0
+# pin A02: DMA1 Stream 0 Channel 6
+dma pin A03 0
+# pin A03: DMA1 Stream 1 Channel 6
 dma pin B00 0
 # pin B00: DMA1 Stream 7 Channel 5
 dma pin B01 0
 # pin B01: DMA1 Stream 2 Channel 5
-dma pin A15 0
-# pin A15: DMA1 Stream 5 Channel 3
-dma pin B03 0
-# pin B03: DMA1 Stream 6 Channel 3
-dma pin B06 0
-# pin B06: DMA1 Stream 0 Channel 2
-dma pin B07 0
-# pin B07: DMA1 Stream 3 Channel 2
-dma pin A08 2
-# pin A08: DMA2 Stream 3 Channel 6
-dma pin A01 0
-# pin A01: DMA1 Stream 4 Channel 6
-dma pin A00 0
-# pin A00: DMA1 Stream 2 Channel 6
-
-feature RX_SERIAL
+dma pin C08 0
+# pin C08: DMA2 Stream 2 Channel 0
+dma pin C09 0
+# pin C09: DMA2 Stream 7 Channel 7
 
+# master
 set dshot_burst = ON
-set beeper_inversion = ON
-set beeper_od = OFF
 set gyro_1_bustype = SPI
 set gyro_1_spibus = 1
 set gyro_1_sensor_align = CW0
-set sdcard_detect_inverted = ON
+set blackbox_device = SDCARD
 set sdcard_mode = SPI
 set sdcard_spi_bus = 3
-serial 5 64 115200 57600 0 115200
+set sdcard_detect_inverted = ON
+set beeper_inversion = ON
+set beeper_od = OFF
+set current_meter = ADC
 set battery_meter = ADC
+set mag_hardware = NONE
+set baro_hardware = NONE