add BLADE_PRO_H7

configs/BLADE_PRO_H7/config.h

@@ -0,0 +1,150 @@
+/*
+ * This file is part of Betaflight.
+ *
+ * Betaflight is free software. You can redistribute this software
+ * and/or modify this software under the terms of the GNU General
+ * Public License as published by the Free Software Foundation,
+ * either version 3 of the License, or (at your option) any later
+ * version.
+ *
+ * Betaflight is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+ *
+ * See the GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public
+ * License along with this software.
+ *
+ * If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#pragma once
+
+#define FC_TARGET_MCU     STM32H743
+
+#define BOARD_NAME        BLADE_PRO_H7
+#define MANUFACTURER_ID   RUSH
+
+#define USE_ACC
+#define USE_ACC_SPI_MPU6500
+#define USE_GYRO
+#define USE_GYRO_SPI_MPU6500
+#define USE_ACC_SPI_MPU6000
+#define USE_GYRO_SPI_MPU6000
+#define USE_ACC_SPI_ICM42688P
+#define USE_GYRO_SPI_ICM42688P
+#define USE_ACC_SPI_ICM42605
+#define USE_GYRO_SPI_ICM42605
+#define USE_BARO
+#define USE_BARO_BMP280
+#define USE_BARO_DPS310
+#define USE_MAX7456
+#define USE_FLASH
+#define USE_FLASH_M25P16
+
+#define BEEPER_PIN           PA15
+#define MOTOR1_PIN           PB0
+#define MOTOR2_PIN           PB1
+#define MOTOR3_PIN           PA0
+#define MOTOR4_PIN           PA1
+#define MOTOR5_PIN           PA2
+#define MOTOR6_PIN           PA3
+#define MOTOR7_PIN           PD12
+#define MOTOR8_PIN           PD13
+#define SERVO1_PIN           PE5
+#define SERVO2_PIN           PE6
+#define SERVO3_PIN           PD15
+#define SERVO4_PIN           PD14
+
+#define LED_STRIP_PIN        PA8
+#define UART1_TX_PIN         PA9
+#define UART2_TX_PIN         PD5
+#define UART3_TX_PIN         PD8
+#define UART4_TX_PIN         PB9
+#define UART6_TX_PIN         PC6
+#define UART7_TX_PIN         PE8
+#define UART8_TX_PIN         PE1
+#define UART1_RX_PIN         PA10
+#define UART2_RX_PIN         PD6
+#define UART3_RX_PIN         PD9
+#define UART4_RX_PIN         PB8
+#define UART6_RX_PIN         PC7
+#define UART7_RX_PIN         PE7
+#define UART8_RX_PIN         PE0
+#define I2C1_SCL_PIN         PB6
+#define I2C2_SCL_PIN         PB10
+#define I2C1_SDA_PIN         PB7
+#define I2C2_SDA_PIN         PB11
+#define LED0_PIN             PE3
+#define LED1_PIN             PE4
+#define SPI1_SCK_PIN         PA5
+#define SPI2_SCK_PIN         PB13
+#define SPI3_SCK_PIN         PB3
+#define SPI4_SCK_PIN         PE12
+#define SPI1_SDI_PIN         PA6
+#define SPI2_SDI_PIN         PB14
+#define SPI3_SDI_PIN         PB4
+#define SPI4_SDI_PIN         PE13
+#define SPI1_SDO_PIN         PD7
+#define SPI2_SDO_PIN         PB15
+#define SPI3_SDO_PIN         PB5
+#define SPI4_SDO_PIN         PE14
+
+#define ADC_VBAT_PIN         PC0
+#define ADC_RSSI_PIN         PC5
+#define ADC_CURR_PIN         PC1
+#define ADC_EXTERNAL1_PIN    PC4
+#define PINIO1_PIN           PD10
+#define PINIO2_PIN           PD11
+#define FLASH_CS_PIN         PE2
+#define MAX7456_SPI_CS_PIN   PB12
+#define GYRO_1_EXTI_PIN      PB2
+#define GYRO_2_EXTI_PIN      PE15
+#define GYRO_1_CS_PIN        PC15
+#define GYRO_2_CS_PIN        PE11
+
+
+#define TIMER_PIN_MAPPING \
+    TIMER_PIN_MAP( 0, PA15, 1,  0) \
+    TIMER_PIN_MAP( 1, PB0 , 2,  0) \
+    TIMER_PIN_MAP( 2, PB1 , 2,  1) \
+    TIMER_PIN_MAP( 3, PA0 , 2,  2) \
+    TIMER_PIN_MAP( 4, PA1 , 2,  3) \
+    TIMER_PIN_MAP( 5, PA2 , 2,  4) \
+    TIMER_PIN_MAP( 6, PA3 , 2,  5) \
+    TIMER_PIN_MAP( 7, PD12, 1,  6) \
+    TIMER_PIN_MAP( 8, PD13, 1,  7) \
+    TIMER_PIN_MAP( 9, PD14, 1, 12) \
+    TIMER_PIN_MAP(10, PD15, 1, -1) \
+    TIMER_PIN_MAP(11, PE5 , 1,  0) \
+    TIMER_PIN_MAP(12, PE6 , 1, -1) \
+    TIMER_PIN_MAP(13, PA8 , 1, 14)
+
+
+
+#define ADC1_DMA_OPT        8
+#define ADC3_DMA_OPT        9
+#define TIMUP1_DMA_OPT      0
+#define TIMUP3_DMA_OPT      2
+#define TIMUP4_DMA_OPT      1
+#define TIMUP5_DMA_OPT      0
+
+#define DEFAULT_GYRO_TO_USE GYRO_CONFIG_USE_GYRO_BOTH
+#define MAG_I2C_INSTANCE (I2CDEV_1)
+#define BARO_I2C_INSTANCE (I2CDEV_2)
+#define DEFAULT_BLACKBOX_DEVICE     BLACKBOX_DEVICE_FLASH
+#define DEFAULT_CURRENT_METER_SOURCE CURRENT_METER_ADC
+#define DEFAULT_VOLTAGE_METER_SOURCE VOLTAGE_METER_ADC
+#define DEFAULT_CURRENT_METER_SCALE 250
+#define BEEPER_INVERTED
+#define MAX7456_SPI_INSTANCE SPI2
+#define PINIO1_CONFIG 129
+#define PINIO1_BOX 39
+#define PINIO2_BOX 40
+#define FLASH_SPI_INSTANCE SPI3
+#define GYRO_1_SPI_INSTANCE SPI1
+#define GYRO_1_ALIGN CW180_DEG
+#define GYRO_2_SPI_INSTANCE SPI4
+#define GYRO_2_ALIGN CW270_DEG
+