CUST-CKFLIGHTF4 Custom Design config

configs/CKFLIGHTF4/config.h

@@ -0,0 +1,110 @@
+/*
+ * This file is part of Betaflight.
+ *
+ * Betaflight is free software. You can redistribute this software
+ * and/or modify this software under the terms of the GNU General
+ * Public License as published by the Free Software Foundation,
+ * either version 3 of the License, or (at your option) any later
+ * version.
+ *
+ * Betaflight is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+ *
+ * See the GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public
+ * License along with this software.
+ *
+ * If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#pragma once
+
+#define FC_TARGET_MCU     STM32F405
+
+#define BOARD_NAME        CKFLIGHTF4
+#define MANUFACTURER_ID   CUST
+
+#define USE_GYRO
+#define USE_GYRO_SPI_ICM20602
+#define USE_ACC
+#define USE_ACC_SPI_ICM20602
+#define USE_BARO
+#define USE_BARO_SPI_MS5611
+#define USE_MAX7456
+#define USE_SDCARD
+
+#define BEEPER_PIN           PB0
+#define MOTOR1_PIN           PB5
+#define MOTOR2_PIN           PB6
+#define MOTOR3_PIN           PB7
+#define MOTOR4_PIN           PA2
+
+#define LED_STRIP_PIN        PC8
+
+#define UART1_TX_PIN         PA9
+#define UART1_RX_PIN         PA10
+
+#define UART4_TX_PIN         PA0
+#define UART4_RX_PIN         PA1
+
+#define UART6_TX_PIN         PC6
+#define UART6_RX_PIN         PC7
+
+#define LED0_PIN             PC2
+#define LED1_PIN             PC3
+
+#define I2C2_SCL_PIN         PB10
+#define I2C2_SDA_PIN         PB11
+
+#define SPI1_SCK_PIN         PA5
+#define SPI1_SDI_PIN         PA6
+#define SPI1_SDO_PIN         PA7
+
+#define SPI2_SCK_PIN         PB13
+#define SPI2_SDI_PIN         PB14
+#define SPI2_SDO_PIN         PB15
+
+#define SPI3_SCK_PIN         PC10
+#define SPI3_SDI_PIN         PC11
+#define SPI3_SDO_PIN         PC12
+
+#define ADC_VBAT_PIN         PC5
+#define ADC_CURR_PIN         PA4
+
+#define SDCARD_SPI_CS_PIN    PA8
+#define MAX7456_SPI_CS_PIN   PC9
+#define GYRO_1_CS_PIN        PB12
+#define BARO_CS_PIN          PC4
+
+#define TIMER_PIN_MAPPING \
+    TIMER_PIN_MAP(0, PB5, 1, 0) \
+    TIMER_PIN_MAP(1, PB6, 1, 0) \
+    TIMER_PIN_MAP(2, PB7, 1, 0) \
+    TIMER_PIN_MAP(3, PA2, 1, 0) \
+    TIMER_PIN_MAP(4, PC8, 2, 0) \
+    TIMER_PIN_MAP(5, PB0, 1, -1)
+
+
+#define ADC1_DMA_OPT        1
+
+#define MAG_I2C_INSTANCE (I2CDEV_2)
+
+#define BARO_SPI_INSTANCE SPI1
+
+#define BEEPER_INVERTED
+
+#define SYSTEM_HSE_MHZ 8
+
+#define GYRO_1_SPI_INSTANCE SPI1
+#define GYRO_1_ALIGN CW0_DEG
+#define GYRO_1_ALIGN_YAW 0
+
+#define MAX7456_SPI_INSTANCE SPI2
+
+#define USE_SDCARD_SPI
+#define SDCARD_SPI_INSTANCE SPI3
+#define DEFAULT_BLACKBOX_DEVICE     BLACKBOX_DEVICE_SDCARD
+#define DEFAULT_VOLTAGE_METER_SOURCE VOLTAGE_METER_ADC
+#define DEFAULT_CURRENT_METER_SOURCE CURRENT_METER_ADC