add orqaf7 target (#524)

* add orqaf7 target

* Update configs/ORQAF7/config.h

---------

Co-authored-by: Mark Haslinghuis <[email protected]>

configs/ORQAF7/config.h

@@ -0,0 +1,121 @@
+/*
+ * This file is part of Betaflight.
+ *
+ * Betaflight is free software. You can redistribute this software
+ * and/or modify this software under the terms of the GNU General
+ * Public License as published by the Free Software Foundation,
+ * either version 3 of the License, or (at your option) any later
+ * version.
+ *
+ * Betaflight is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+ *
+ * See the GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public
+ * License along with this software.
+ *
+ * If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#pragma once
+
+#define FC_TARGET_MCU     STM32F7X2
+
+#define BOARD_NAME        ORQAF7
+#define MANUFACTURER_ID   ORQA
+
+#define USE_GYRO
+#define USE_GYRO_SPI_MPU6000
+#define USE_ACC
+#define USE_ACC_SPI_MPU6000
+#define USE_BARO
+#define USE_BARO_DPS310
+#define USE_FLASH
+#define USE_FLASH_W25Q128FV
+#define USE_MAX7456
+
+#define BEEPER_PIN           PA4
+#define MOTOR1_PIN           PC8  
+#define MOTOR2_PIN           PC9
+#define MOTOR3_PIN           PA8
+#define MOTOR4_PIN           PA9          
+
+#define I2C1_SCL_PIN         PB8
+#define I2C1_SDA_PIN         PB9
+
+#define UART1_TX_PIN         PB6
+#define UART1_RX_PIN         PB7
+
+#define UART2_TX_PIN         PA2
+#define UART2_RX_PIN         PA3
+
+#define UART3_TX_PIN         PB10         
+#define UART3_RX_PIN         PB11
+
+#define UART4_TX_PIN         PA0       
+#define UART4_RX_PIN         PA1
+
+#define UART4_TX_PIN         PA0       
+#define UART4_RX_PIN         PA1
+
+#define UART5_TX_PIN         PC12       
+#define UART5_RX_PIN         PD2
+
+#define UART6_TX_PIN         PC6       
+#define UART6_RX_PIN         PC7
+
+#define LED1_PIN             PC15
+#define LED2_PIN             PC14  
+
+#define SPI1_SCK_PIN         PA5   
+#define SPI1_SDI_PIN         PA6
+#define SPI1_SDO_PIN         PA7
+#define GYRO_1_EXTI_PIN      PC4
+#define GYRO_1_CS_PIN        PB2
+#define GYRO_1_SPI_INSTANCE SPI1
+
+#define SPI2_SCK_PIN         PB13
+#define SPI2_SDI_PIN         PB14
+#define SPI2_SDO_PIN         PB15
+#define FLASH_CS_PIN         PB12
+#define FLASH_SPI_INSTANCE SPI2
+
+#define SPI3_SCK_PIN         PC10
+#define SPI3_SDI_PIN         PC11
+#define SPI3_SDO_PIN         PB5
+#define MAX7456_SPI_CS_PIN   PC3
+#define MAX7456_SPI_INSTANCE SPI3
+
+#define ADC_VBAT_PIN         PC0
+#define ADC_CURR_PIN         PC2
+
+#define ESCSERIAL_PIN        PD2                
+#define USB_DETECT_PIN       PA10
+#define CAMERA_CONTROL_PIN   PB3
+#define LED_STRIP_PIN        PA15
+
+#define TIMER_PIN_MAPPING \
+    TIMER_PIN_MAP( 0, PC8,  1,  0) \
+    TIMER_PIN_MAP( 1, PC9,  1,  0) \
+    TIMER_PIN_MAP( 2, PA8,  1,  1) \
+    TIMER_PIN_MAP( 3, PA9,  1,  1) \
+    TIMER_PIN_MAP( 4, PA15, 1,  0) \
+    TIMER_PIN_MAP( 5, PB3,  1,  0)
+
+#define DEFAULT_VOLTAGE_METER_SCALE 112
+#define DEFAULT_VOLTAGE_METER_DIVIDER 1
+#define DEFAULT_VOLTAGE_METER_MULTIPLIER 12
+#define DEFAULT_CURRENT_METER_SCALE 108
+#define USE_SERIALRX_GHST
+#define SERIALRX_UART SERIAL_PORT_USART2
+#define GPS_UART SERIAL_PORT_USART6
+#define BARO_I2C_INSTANCE (I2CDEV_1)
+#define DEFAULT_BLACKBOX_DEVICE     BLACKBOX_DEVICE_FLASH
+#define DEFAULT_CURRENT_METER_SOURCE CURRENT_METER_ADC
+#define DEFAULT_VOLTAGE_METER_SOURCE VOLTAGE_METER_ADC
+#define USE_BEEPER
+#define SYSTEM_HSE_MHZ 8
+
+