add target Stellar F4 V2

configs/STELLARF4V2/config.h

@@ -0,0 +1,127 @@
+/*
+ * This file is part of Betaflight.
+ *
+ * Betaflight is free software. You can redistribute this software
+ * and/or modify this software under the terms of the GNU General
+ * Public License as published by the Free Software Foundation,
+ * either version 3 of the License, or (at your option) any later
+ * version.
+ *
+ * Betaflight is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+ *
+ * See the GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public
+ * License along with this software.
+ *
+ * If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#pragma once
+
+#define FC_TARGET_MCU STM32F405
+#define BOARD_NAME STELLARF4
+#define MANUFACTURER_ID STBE
+
+#define TARGET_BOARD_IDENTIFIER "STF4"
+#define USBD_PRODUCT_STRING     "StingBee Stellar F4 V2"
+
+#define USE_ACC
+#define USE_ACC_SPI_ICM42605
+#define USE_ACC_SPI_ICM42688P
+#define USE_GYRO
+#define USE_GYRO_SPI_ICM42605
+#define USE_GYRO_SPI_ICM42688P
+#define USE_GYRO_CLKIN
+#define USE_BARO
+#define USE_BARO_BMP280
+#define USE_BARO_DPS310
+#define USE_MAX7456
+#define USE_SDCARD
+#define USE_FLASH
+#define USE_FLASH_M25P16
+#define USE_FLASH_W25N01G
+#define USE_FLASH_W25M02G
+
+#define BEEPER_PIN          PB2
+#define MOTOR1_PIN          PC9 // TIM8 CH4 (AF3) DMA2 Stream 7 Channel 7
+#define MOTOR2_PIN          PC8 // TIM8 CH3 (AF3) DMA2 Stream 4 Channel 7
+#define MOTOR3_PIN          PC7 // TIM8 CH2 (AF3) DMA2 Stream 3 Channel 7
+#define MOTOR4_PIN          PC6 // TIM8 CH1 (AF3) DMA2 Stream 2 Channel 7
+#define SERVO1_PIN          PB6 // TIM4 CH1 (AF2)
+#define SERVO2_PIN          PB7 // TIM4 CH2 (AF2)
+#define SERVO3_PIN          PB8 // TIM4 CH3 (AF2)
+#define SERVO4_PIN          PB9 // TIM4 CH4 (AF2)
+#define SERVO5_PIN          PA9 // TIM1 CH2 (AF1)
+#define SERVO6_PIN          PA10 // TIM1 CH3 (AF1) or UART1_RX_PIN
+#define SERVO7_PIN          PA8 // TIM1 CH1 (AF1) or UART1_TX_PIN
+#define RX_PPM_PIN          PA3 // TIM5 CH4 (AF2) DMA1 Stream 1 Channel 6
+#define UART2_TX_PIN        PA2
+#define UART3_TX_PIN        PC10
+#define UART4_TX_PIN        PA0
+#define UART5_TX_PIN        PC12
+#define UART2_RX_PIN        PA3
+#define UART3_RX_PIN        PC11
+#define UART4_RX_PIN        PA1
+#define UART5_RX_PIN        PD2
+#define I2C2_SCL_PIN        PB10
+#define I2C2_SDA_PIN        PB11
+#define LED0_PIN            PA15
+#define SPI1_SCK_PIN        PA5
+#define SPI2_SCK_PIN        PB13
+#define SPI3_SCK_PIN        PB3
+#define SPI1_SDI_PIN        PA6
+#define SPI2_SDI_PIN        PC2
+#define SPI3_SDI_PIN        PB4
+#define SPI1_SDO_PIN        PA7
+#define SPI2_SDO_PIN        PB15
+#define SPI3_SDO_PIN        PB5
+#define ADC_VBAT_PIN        PC0
+#define ADC_CURR_PIN        PC1
+#define FLASH_CS_PIN        PC13
+#define PINIO1_PIN          PC14
+#define MAX7456_SPI_CS_PIN  PB12
+#define GYRO_1_EXTI_PIN     PA4
+#define GYRO_1_CS_PIN       PC5
+#define GYRO_1_CLKIN_PIN    PB0 // // TIM3 CH3 (AF2) no DMA
+
+#define TIMER_PIN_MAPPING   TIMER_PIN_MAP( 0,  PC9,  2,  0 ) \
+                            TIMER_PIN_MAP( 1,  PC8,  2,  1 ) \
+                            TIMER_PIN_MAP( 2,  PC7,  2,  1 ) \
+                            TIMER_PIN_MAP( 3,  PC6,  2,  1 ) \
+                            TIMER_PIN_MAP( 4,  PB6,  1, -1 ) \
+                            TIMER_PIN_MAP( 5,  PB7,  1, -1 ) \
+                            TIMER_PIN_MAP( 6,  PB8,  1, -1 ) \
+                            TIMER_PIN_MAP( 7,  PB9,  1, -1 ) \
+                            TIMER_PIN_MAP( 8,  PA9,  1, -1 ) \
+                            TIMER_PIN_MAP( 9,  PA10, 1, -1 ) \
+                            TIMER_PIN_MAP( 10, PA8,  1, -1 ) \
+                            TIMER_PIN_MAP( 11, PA3 , 2,  0 ) \
+                            TIMER_PIN_MAP( 12, PB0,  2, -1 )
+
+#define ADC1_DMA_OPT 0 // DMA2 Stream 0 Channel 0
+
+#define SERIALRX_UART SERIAL_PORT_USART2
+#define SERIALRX_PROVIDER SERIALRX_CRSF
+
+#define MAG_I2C_INSTANCE (I2CDEV_2)
+#define BARO_I2C_INSTANCE (I2CDEV_2)
+#define DASHBOARD_I2C_INSTANCE (I2CDEV_2)
+
+#define DEFAULT_DSHOT_BURST DSHOT_DMAR_ON
+#define MOTOR_PWM_PROTOCOL DSHOT300
+#define DEFAULT_CURRENT_METER_SOURCE CURRENT_METER_ADC
+#define DEFAULT_VOLTAGE_METER_SOURCE VOLTAGE_METER_ADC
+#define DEFAULT_VOLTAGE_METER_SCALE 110
+#define DEFAULT_CURRENT_METER_SCALE 100
+#define BEEPER_INVERTED
+#define DEFAULT_BLACKBOX_DEVICE BLACKBOX_DEVICE_FLASH
+#define FLASH_SPI_INSTANCE SPI3
+#define MAX7456_SPI_INSTANCE SPI2
+
+#define PINIO1_BOX 40
+#define GYRO_1_SPI_INSTANCE SPI1
+#define GYRO_1_ALIGN CW180_DEG
+#define GYRO_1_ALIGN_PITCH 1800