add new target EMAX_F405_ELRS_AIO (#435)

* new target

* Updata EMAX_F405_ELRS_AIO

* Updata EMAX_F405_ELRS_AIO

* updata config

* Updata config

* Update configs/EMAX_F405_ELRS_AIO/config.h

* Update configs/EMAX_F405_ELRS_AIO/config.h

* Update configs/EMAX_F405_ELRS_AIO/config.h

---------

Co-authored-by: Mark Haslinghuis <[email protected]>

configs/EMAX_F405_ELRS_AIO/config.h

@@ -0,0 +1,96 @@
+/*
+ * This file is part of Betaflight.
+ *
+ * Betaflight is free software. You can redistribute this software
+ * and/or modify this software under the terms of the GNU General
+ * Public License as published by the Free Software Foundation,
+ * either version 3 of the License, or (at your option) any later
+ * version.
+ *
+ * Betaflight is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+ *
+ * See the GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public
+ * License along with this software.
+ *
+ * If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#pragma once
+
+#define FC_TARGET_MCU       STM32F405
+#define BOARD_NAME          EMAX_F405_ELRS_AIO
+#define MANUFACTURER_ID     EMAX 
+
+#define USE_ACC
+#define USE_GYRO
+#define USE_GYRO_SPI_ICM42688P 
+#define USE_ACC_SPI_ICM42688P 
+#define USE_MAX7456
+#define USE_FLASH
+#define USE_FLASH_W25Q128FV
+
+#define BEEPER_PIN  PB4
+#define MOTOR1_PIN  PB0
+#define MOTOR2_PIN  PB1
+#define MOTOR3_PIN  PA3
+#define MOTOR4_PIN  PA2
+#define LED_STRIP_PIN   PB6
+#define UART1_TX_PIN    PA9
+#define UART3_TX_PIN    PB10
+#define UART4_TX_PIN    PA0
+#define UART6_TX_PIN    PC6
+#define UART1_RX_PIN    PA10
+#define UART3_RX_PIN    PB11
+#define UART4_RX_PIN    PA1
+#define UART5_RX_PIN    PD2
+#define UART6_RX_PIN    PC7
+#define LED1_PIN        PB5
+#define SPI1_SCK_PIN    PA5
+#define SPI2_SCK_PIN    PB13
+#define SPI3_SCK_PIN    PC10
+#define SPI1_SDI_PIN    PA6
+#define SPI2_SDI_PIN    PB14
+#define SPI3_SDI_PIN    PC11
+#define SPI1_SDO_PIN    PA7
+#define SPI2_SDO_PIN    PB15
+#define SPI3_SDO_PIN    PC12
+#define ESCSERIAL1_PIN  PB8
+#define ADC_BATT_PIN    PC2
+#define ADC_RSSI_PIN    PC0
+#define ADC_CURR_PIN    PC1
+#define FLASH_CS_PIN    PB12
+#define MAX7456_CS_PIN  PA15
+#define GYRO_1_EXTI_PIN PC4
+#define GYRO_1_CS_PIN   PA4
+#define USB_DETECT_PIN  PC5
+
+#define TIMER_PIN_MAPPING \
+    TIMER_PIN_MAP(0,PB0 , 2, 0) \
+    TIMER_PIN_MAP(1,PB1 , 2, 0) \
+    TIMER_PIN_MAP(2,PA3 , 1, 0) \
+    TIMER_PIN_MAP(3,PA2 , 1, 0) \
+    TIMER_PIN_MAP(4,PA10 , 1, 0)
+
+#define ADC2_DMA_OPT        1
+#define SPI2_TX_DMA_OPT     0
+
+
+#define SERIALRX_PROVIDER CRSF
+#define ADC_INSTANCE ADC2
+#define DEFAULT_BLACKBOX_DEVICE BLACKBOX_DEVICE_FLASH
+#define DEFAULT_CURRENT_METER_SOURCE CURRENT_METER_ADC
+#define DEFAULT_VOLTAGE_METER_SOURCE VOLTAGE_METER_ADC
+#define BEEPER_INVERSION ON
+#define BEEPER_OD OFF
+#define SYSTEM_HSE_MHZ 8
+#define MAX7456_SPI_INSTANCE SPI3
+#define FLASH_SPI_INSTANCE SPI2
+#define GYRO_1_SPI_INSTANCE SPI1
+#define GYRO_1_ALIGN CW90_DEG
+#define GYRO_1_ALIGN_YAW 900
+#define GYRO_1_SENSOR_ALIGN CW0_DEG
+