Proger firmware for stacky

This firmware allows a Proger to upload code to any Stacky device using i2c with avrdude To build the firmware use INO tool from http://inotool.org/ or the Arduino IDE

When using the Arduino IDE copy the libraries in the lib directory to your Arduino libraries forder!!

Example

avrdude -cavr109 -patmega328p -P/dev/tty.usbmodem1a1231 -Uflash:w:Blink.cpp.hex:i

• -cavr109 this is the programmer type to use
• -P this is the usb port the proger is on
• -U specify the file to flash