Synchronize AdGuardHome config to replica instances.
Please check the wiki for FAQ and Deprecations.
- General Settings
- Filters
- Rewrites
- Services
- Clients
- DNS Config
- DHCP Config
- Theme
By default, all features are enabled. Single features can be disabled in the config.
New AdGuardHome replica instances can be automatically installed if enabled via the config autoSetup. During automatic installation, the admin interface will be listening on port 3000 in runtime.
To skip automatic setup
Get from releases or install from source
go install github.com/bakito/adguardhome-sync@latestBoth the origin instance must be initially setup via the AdguardHome installation wizard.
Some instances of AdGuard Home do not support basic authentication. For instance, many routers with built-in Adguard Home support do not. If this is the case, a valid cookie may be provided instead. If the router protects the AdGuard instance behind its own authentication, the cookie from an authenticated request may allow the sync to succeed.
- This has been tested successfully against GL.Inet routers with AdGuard Home.
- Note: due to the short validity of cookies, this approach is likely only suitable for one-time syncs
export LOG_LEVEL=info
export ORIGIN_URL=https://192.168.1.2:3000
export ORIGIN_USERNAME=username
export ORIGIN_PASSWORD=password
# export ORIGIN_COOKIE=Origin-Cookie-Name=CCCOOOKKKIIIEEE
export REPLICA1_URL=http://192.168.1.3
export REPLICA1_USERNAME=username
export REPLICA1_PASSWORD=password
# export REPLICA_COOKIE=Replica-Cookie-Name=CCCOOOKKKIIIEEE
# run once
adguardhome-sync run
# run as daemon
adguardhome-sync run --cron "0 */2 * * *"Verified on Ubuntu Linux 24.04
Assume you have downloaded the the adguardhome-sync binary to /opt/adguardhome-sync.
Create systemd service file /opt/adguardhome-sync/adguardhome-sync.service:
[Unit]
Description = AdGuardHome Sync
After = network.target
[Service]
ExecStart = /opt/adguardhome-sync/adguardhome-sync --config /opt/adguardhome-sync/adguardhome-sync.yaml run
[Install]
WantedBy = multi-user.target
Create a configuration file /opt/adguardhome-sync/adguardhome-sync.yaml, please follow Config file
section below for details.
Install and enable service:
sudo cp /opt/adguardhome-sync/adguardhome-sync.service /etc/systemd/system/
sudo systemctl enable adguardhome-sync.service
sudo systemctl start adguardhome-sync.service
Then you can check the status:
sudo systemctl status adguardhome-sync.service
If web UI has been enabled in configuration (default port is 8080), can also check the status via
http://<server-IP>:8080
@ECHO OFF
@TITLE AdGuardHome-Sync
REM set LOG_LEVEL=debug
set LOG_LEVEL=info
REM set LOG_LEVEL=warn
REM set LOG_LEVEL=error
set ORIGIN_URL=http://192.168.1.2:3000
set ORIGIN_USERNAME=username
set ORIGIN_PASSWORD=password
# set ORIGIN_COOKIE=Origin-Cookie-Name=CCCOOOKKKIIIEEE
set REPLICA1_URL=http://192.168.2.2:3000
set REPLICA1_USERNAME=username
set REPLICA1_PASSWORD=password
# set REPLICA1_COOKIE=Replica-Cookie-Name=CCCOOOKKKIIIEEE
set FEATURES_DHCP=false
set FEATURES_DHCP_SERVERCONFIG=false
set FEATURES_DHCP_STATICLEASES=false
# run once
adguardhome-sync run
# run as daemon
adguardhome-sync run --cron "0 */2 * * *"docker run -d \
--name=adguardhome-sync \
-p 8080:8080 \
-v /path/to/appdata/config/adguardhome-sync.yaml:/config/adguardhome-sync.yaml \
--restart unless-stopped \
ghcr.io/bakito/adguardhome-sync:latest---
version: "2.1"
services:
adguardhome-sync:
image: ghcr.io/bakito/adguardhome-sync
container_name: adguardhome-sync
command: run --config /config/adguardhome-sync.yaml
volumes:
- /path/to/appdata/config/adguardhome-sync.yaml:/config/adguardhome-sync.yaml
ports:
- 8080:8080
restart: unless-stopped---
version: "2.1"
services:
adguardhome-sync:
image: ghcr.io/bakito/adguardhome-sync
container_name: adguardhome-sync
command: run
environment:
LOG_LEVEL: "info"
ORIGIN_URL: "https://192.168.1.2:3000"
# ORIGIN_WEB_URL: "https://some-other.url" # used in the web interface (default: <origin-url>
ORIGIN_USERNAME: "username"
ORIGIN_PASSWORD: "password"
REPLICA1_URL: "http://192.168.1.3"
REPLICA1_USERNAME: "username"
REPLICA1_PASSWORD: "password"
REPLICA2_URL: "http://192.168.1.4"
REPLICA2_USERNAME: "username"
REPLICA2_PASSWORD: "password"
REPLICA2_API_PATH: "/some/path/control"
# REPLICA2_WEB_URL: "https://some-other.url" # used in the web interface (default: <replica-url>
# REPLICA2_AUTO_SETUP: true # if true, AdGuardHome is automatically initialized.
# REPLICA2_INTERFACE_NAME: 'ens18' # use custom dhcp interface name
# REPLICA2_DHCP_SERVER_ENABLED: true/false (optional) enables/disables the dhcp server on the replica
CRON: "0 */2 * * *" # run every 2 hours
RUN_ON_START: "true"
# CONTINUE_ON_ERROR: false # If enabled, the synchronisation task will not fail on single errors, but will log the errors and continue
# Configure the sync API server, disabled if api port is 0
API_PORT: 8080
# API_DARK_MODE: "true"
# API_USERNAME: admin
# API_PASSWORD: secret
# the directory of the provided tls certs
# API_TLS_CERT_DIR: /path/to/certs
# the name of the cert file (default: tls.crt)
# API_TLS_CERT_NAME: foo.crt
# the name of the key file (default: tls.key)
# API_TLS_KEY_NAME: bar.key
# Configure sync features; by default all features are enabled.
# FEATURES_GENERAL_SETTINGS: "true"
# FEATURES_QUERY_LOG_CONFIG: "true"
# FEATURES_STATS_CONFIG: "true"
# FEATURES_CLIENT_SETTINGS: "true"
# FEATURES_SERVICES: "true"
# FEATURES_FILTERS: "true"
# FEATURES_DHCP_SERVER_CONFIG: "true"
# FEATURES_DHCP_STATIC_LEASES: "true"
# FEATURES_DNS_SERVER_CONFIG: "true"
# FEATURES_DNS_ACCESS_LISTS: "true"
# FEATURES_DNS_REWRITES: "true"
# FEATURES_THEME: "true" # if false the UI theme is not synced
ports:
- 8080:8080
restart: unless-stoppedlocation: $HOME/.adguardhome-sync.yaml
# cron expression to run in daemon mode. (default; "" = runs only once)
cron: "0 */2 * * *"
# runs the synchronisation on startup
runOnStart: true
# If enabled, the synchronisation task will not fail on single errors, but will log the errors and continue
continueOnError: false
origin:
# url of the origin instance
url: https://192.168.1.2:3000
# apiPath: define an api path if other than "/control"
# insecureSkipVerify: true # disable tls check
username: username
password: password
# cookie: Origin-Cookie-Name=CCCOOOKKKIIIEEE
# replicas instances
replicas:
# url of the replica instance
- url: http://192.168.1.3
username: username
password: password
# cookie: Replica1-Cookie-Name=CCCOOOKKKIIIEEE
- url: http://192.168.1.4
username: username
password: password
# cookie: Replica2-Cookie-Name=CCCOOOKKKIIIEEE
# autoSetup: true # if true, AdGuardHome is automatically initialized.
# webURL: "https://some-other.url" # used in the web interface (default: <replica-url>
# Configure the sync API server, disabled if api port is 0
api:
# Port, default 8080
port: 8080
# if username and password are defined, basic auth is applied to the sync API
username: username
password: password
# enable api dark mode
darkMode: true
# enable metrics on path '/metrics' (api port must be != 0)
# metrics:
# enabled: true
# scrapeInterval: 30s
# queryLogLimit: 10000
# enable tls for the api server
# tls:
# # the directory of the provided tls certs
# certDir: /path/to/certs
# # the name of the cert file (default: tls.crt)
# certName: foo.crt
# # the name of the key file (default: tls.key)
# keyName: bar.key
# Configure sync features; by default all features are enabled.
features:
generalSettings: true
queryLogConfig: true
statsConfig: true
clientSettings: true
services: true
filters: true
dhcp:
serverConfig: true
staticLeases: true
dns:
serverConfig: true
accessLists: true
rewrites: trueThe log level can be set with the environment variable: LOG_LEVEL
The following log levels are supported (default: info)
- debug
- info
- warn
- error
Default log format is console.
It can be changed to jsonby setting the environment variable: LOG_FORMAT=json
![@dependabot[bot]](https://avatars.githubusercontent.com/in/29110?s=64&v=4){kind=small}
