![charger image] (https://e-radionica.com/media/catalog/product/d/s/dsc_0469.jpg) [Lithium-ion battery charger with protection(222007)] (https://e-radionica.com/hr/li-ion-punjac-s-zastitom-jst.html)
Since lithium batteries demand a special charging regime, and you must not charge them on a regular power source, you will need a charger like this one. Affordable, with integrated CC/CV charging regime, definitely the easiest way to charge some lithium batteries. Input voltage is connectable via USB cables or separate terminals. In addition, this charger includes battery protection which means that your cell (18650 battery for example) is protected from overvoltage, undervoltage and a large short circuit current.
- Input voltage: 4.5V-5.5V
- Output max. current: 1A, adjustable
- A voltage at which the charging stops: 4.2V
- Two LED diodes, red diode signals charging, green diode signals full battery
- With short circuit, overvoltage and undervoltage protection!
- Without reverse polarity protection on input!
This repo contains Cadsoft Eagle .sch and .brd files for Croduino Basic board. It also contains schematic in .pdf created from .sch Eagle file. Files have been arranged into folders for navigating between different versions of board. Tip: layer 200 shows top silkscreen and layer 208 should be bottom silkscreen. tParts and bParts is not used.
- [Lithium-ion battery charger with protection] (https://e-radionica.com/hr/li-ion-punjac-s-zastitom-jst.html)
- v1.0 - inital version
This product is open-source. Yay! For any tech questions, contact us at [email protected] If you find an Issue, please open one at GitHub. If you can improve our product, fork us.
e-radionica.com Team.