QBox is a high quality extruded aluminium enclosure designed to house the full range of Raspberry Pi single board computers and provide makers with a versatile housing with expansion capability. Up to three additional HATs may be housed together with a range of optional LCD displays. As well as the enclosure hardware, two Carrier Boards are available. CB-1 is for the Pi 3A+ and Pi Zero 2 W and CB-2 is a carrier board for the Pi4 and Pi5. Both carrier boards expose the 40 pin Pi connector and offer additional onbord QWIIC and GROVE expansion connectors whilst the CB-2 adds an NVMe M.2 connector for SSDs with an aditional 3v3, 2.5 Amp power regulator for the SSD.
QBox measures 90 x 90 x 90 mm and is available in silver or black anodised finishes. Front and rear panels are gloss black acrylic and the front panels are designed to hold 2.4 inch or 2.8 inch LCD displays with full colour 320x240 or 640x480 resolution.
All hardware parts for this Project can be obtained from https://qbox.viota.io WORK IN PROGRESS
This repo contains Installation Guides, LCD binaries and Documentation for the QBox Products.
The hardware and firmware for this Project is Open Source and free to use without restriction.
Credit and much thanks to Kieran and Isaac at Ideasonboard for their excellent work on the LCD binaries.
Please use at your own risk as no liability is assumed. See Unlicensed for more details.
The Wiki contains the guides, binaries and more info.