Apollo Hardware To Do List

ALL

 Look at redistribution of FireFlys

CM001, bare board

At Charlie’s, VU7P-1, no KU15P

 Was used for testing 25Gx12 firefly, they have move to CM007

CM002, bare board

At Charlie’s, Fast VU7P-2, no KU15P

 Assemble with new FireFly configuration
 Mate to SM01
 Test at PSB 
 Unmate from SM01
 Send to BU to mate with SM Rev 2
 Send to TIF

CM003, socketed bare board, remove some FireFlys?

At Rui’s, socketed VU7P, socketed KU15P

 Receive from Rui
 Remove heat sinks and FireFlys
 Apply ECN001
 Apply ECN002
 Assemble with new FireFly configuration
 Send to Rui

CM004, bare board

At PSB lab for Fatima, Fast VU7P-2, no KU15P

 Attach VU7P heatsink with thermal putty
 Assemble with new FireFly configuration
 Send to BU to mate with SM Rev 2
 Send to TIF

CM005

At BU, mated to SM #???, KU15P, VU7P

 Receive from BU
 Remove heat sinks and FireFlys
 Apply ECN001
 Apply ECN002
 Attach VU7P heatsink with thermal putty 
 Assemble with new FireFly configuration
 Send to BU

CM006

At BU, ATLAS board, KU15P, no VU7P

 X Receive from BU
 X Remove heat sinks and FireFlys
 X Have MPL attach VU7P-1
 X Apply ECN001
 X Apply ECN002
 Attach VU7P heatsink with thermal putty 
 Assemble with new FireFly configuration
 Send back to BU

CM007 “Apollo 10”

At Charlie’s, VU7P-1, KU15P

 Attach VU7P heatsink with thermal putty 
 X Add wires to monitor K_VCCINT and V_VCCINT at LGA80D output and FPGA input
 X Check thermal performance in each ATCA slot

CM008 “Apollo 09”

At PSB

 Remove heat sinks and FireFlys
 Have MPL replace IND072 for K_MGTH_AVTT  
 Attach VU7P heatsink with thermal putty 
 Assemble with new FireFly configuration

CM009

At TIF, mated to SM #???, KU15P, VU7P

 Receive from TIF
 Remove heat sinks and FireFlys
 Apply ECN001
 Apply ECN002
 Attach VU7P heatsink with thermal putty 
 Assemble with new FireFly configuration
 Send to ???

CM010